{
    "type": "process",
    "setting_id": "GP036",
    "name": "0.30mm Strength @FT 0.6 nozzle",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_process_folgertech_common",
    "layer_height": "0.3",
    "initial_layer_print_height": "0.3",
    "wall_loops": "4",
    "bottom_shell_layers": "3",
    "top_shell_layers": "4",
    "bridge_flow": "1",
    "line_width": "0.62",
    "outer_wall_line_width": "0.62",
    "initial_layer_line_width": "0.62",
    "sparse_infill_line_width": "0.62",
    "sparse_infill_density":"25%",
    "inner_wall_line_width": "0.62",
    "internal_solid_infill_line_width": "0.62",
    "support_line_width": "0.62",
    "top_surface_line_width": "0.62",
    "initial_layer_speed": "35",
    "initial_layer_infill_speed": "55",
    "outer_wall_speed": "60",
    "inner_wall_speed": "80",
    "sparse_infill_speed": "80",
    "internal_solid_infill_speed": "80",
    "top_surface_speed": "60",
    "gap_infill_speed": "40",
    "bridge_speed": "30",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "50",
    "overhang_3_4_speed": "15",
    "overhang_4_4_speed": "10",
    "compatible_printers": [
      "Folgertech i3 0.6 nozzle",
      "Folgertech FT-5 0.6 nozzle",
      "Folgertech FT-6 0.6 nozzle"
    ]
}