* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Update Creality Sermoon V1 0.4 nozzle.json
Changed the default process for the Sermoon V1 Printer.
* Update 0.20mm Standard @Creality Sermoon V1.json
Reduced speeds of .20mm process for Sermoon V1 to no more than 195mm/s as not all printers which may use this are running Klipper. It is set to Marlin for the flavour but is targeted at a Klippered printer.
* Update 0.16mm Optimal @Creality Sermoon V1.json
Remove Arc Fitting and reduce elephant foot.
* Update 0.20mm Standard @Creality Sermoon V1.json
Remove Arc Fitting and reduce elephant foot.
* Update 0.28mm Standard @Creality Sermoon V1.json
Remove Arc Fitting and reduce elephant foot.
* e3v3se: disable m73 as not supported in FW
* e3v3se: remove thumbnails
Remove thumbnails generation to not confuse users.
Currently event CrealityPrint does not generate thumbnails for the E3 V3 SE.
* e3v3se: update motion capabilities
Update motion parameters for the Ender 3 V3 SE profiles:
- max acceleration on all axis to 2500 as per product spec
- max X and Y speeds to 250 as per product spec
- max Z speed to 5 as set in factory defaults (M502, M503)
- max E speed to 40 as presented in recommended print parameters on the
product page
Product spec sheet:
https://wiki.creality.com/en/ender-series/ender-3-v3-se/quick-start-guide/user-manual
* Add Creality Ender-3 S1 Plus
* Misc
* Fix nozzle_diameter
* Add printer_variant value
* Change build plate model/texture to use Ender-3 V3 SE
* Enable mesh leveling
* Up max travel acceleration to 5000
* Enable infill_combination
* Add Draft profiles
* Change buildplate model/texture
* Fix build plate model
* Add retraction & detraction speed & change retraction length
* Add filament_ to the beginning
* Revert retraction & detraction speed & retraction length
* Tests
Trying to change retract and detract speed as well as retraction length
Also trying to have Z-hop only happen on top layers
* Apply new values to other nozzles
* disable z_hop
* Lower build plate model
* Resolve merge conflicts
* temporarily remove Ender-3 S1 Plus
* Re-add Ender-3 S1 Plus
* Add CR-10 SE and standard profiles
* Misc
Add more perimeters to CR-10 SE profiles
Add printer to filament profiles
Link everything in Creality.json
* Fix two bugs
* Forgot this
* Add Ender-3 V3 SE .2, .6, .8 and fix small Ender-3 Pro bug
* Forgot to remove these
* Fix error
* Remove these...
* Why did I delete this?
* Revert deletion
* Add missing profiles
* Create 0.24mm Draft @Creality Ender3V3KE.json
* Apply new nozzle sizes to generic filament
* Maybe this will do it
* Revert 0.4 renames & add to Generic ABS
* Add M420 S1; Enable mesh leveling
* Fix wring nozzle_diameter
* Potentially fix the issue of printer not being added after selected
* Add Ender-3 Pro cover
* Add Ender-3 Pro
* Add Ender-3 Pro .2, .4, .6, and .8
* Add Ender-3 Pro processes
* Delete Ender-3 Pro_cover.png
* Add a smaller version of Ender-3 Pro_cover.png
* Delete Ender-3 Pro_cover
* Further image improvements
* Some improvements for supports and machines limits
* Increase z-hop for KE to avoid the nozzle hit the parts
* Changed jerk V3 KE settings to more logical values.
* Decreased jerk
* Speed, acceleration and jerk settings fine-tunings.
Added "Printer Variant" to all Ender 3 and Prusa Mk3s Profiles
Bug Fixed:
When selected only 1 profile from menu , Orcaslicer imports all nozzle from the printer.
Added "printer_variant": "" for each nozzle.
Now it imports correct only the selected nozzled in the menu.
* Ender 3 - All nozzles and Quality Profiles
Ender 3 Profiles.
0.20 Nozzle
0.40 Nozzle
0.60 Nozzle
0.80 Nozzle
0.12 to 0.24 Quality Profiles for every Nozzle in Process Folder
* all
all
* Ender 3 Profiles
Ender 3 Profiles for: 0,2;0,4;0,6;0,8
5 Different and independent Quality profiles for each Nozzle.
Fine, Optimal, Standard, Draft and Superdraft
* aa
aa
* aa
aa
* aa
aa
* Prusa Mk3s Profiles
Prusa Mk3s Profiles
* Mk3s FIXED
mk3s FIXED
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Added K1C and fixed some settings (took from config files instead of Creality Print)
* Files renaming
* New PLA-CF, prettify json for K1C, naming uniformisation, ...
* Port Special PLA profiles to K1/K1 Max
* Changed slow down layer time and slow down min speed in order to improve overall speed on details.
* Raised PLA bed temp to 55°C
* Optimisations for ABS, ASA and added Generic PC profile.
* Added PA-CF and fixed PC profiles.
* Added new filaments to default materials
* Fixed retraction speed and added missing parameters.
* Fixes for manual filament change
* More tunings and fixes.
* Fixes and tunings
* Formatting
* Decrease z-hop for K1
* Updated thumbnails sizes to the same as Creality Print has.
* Added Creality Ender 3 V3 SE.
* Fixed fine profile.
* Optimized first layer speed (based on Creality Print)
* Brought back Ender-5 (2019)
* Setting Marlin 2 as gcode flavor
* Use inheritance for Ender-3 V3 filament profiles.
* Various improvements.
* Temperature optimisations (less power consumption)
* Fixed some log errors.
* Optimizations
* Reverted support_interface_top_layers
* Added correct jerk and acceleration settings.
* Added retraction speed.
* Re-added missing Ender-5 references in filaments.
* Reverted slow_down_layer_time, Creality print is too optimistic on this at least for Ender 3 V3 SE.
* Optimizations for supports (easier to remove)
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Correct Ender3 values
Maximun Height real is 250mm
Ender 3 screen is not capable to display Thumnails added "" thumnail to avoid large gcodes files.
* Adjusted height to rod / lid
Ender 3 = 25
* Added profile for CReality CR-6 SE and CR-6 Max
* Removed merge conflict artifacts
* Removed duplicate process_list
* Fixed many bugs. Profile now loads correctly in 1.7.0-beta
* fixed filament dependencies for CR-6
