* FIX: the logic of buried points that were not buried
JIRA: none
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: Id95174659c5fce7feba409eb5e14916608745fa4
* ci: update network module based on commit bc7ca98
Change-Id: I923526f0bf9ce5a288144fa1f9b0f2fc640f41b7
* Fix Firefox
Co-authored-by: hadess <hadess@hadess.net>
* FIX: cali: custom created filament from AMS displayed as incompatible
jira: new
remove the condition: is_system
Change-Id: Ib1366966bbdbe01bc9e2483d9914d270ebefa976
* FIX: duplicated items in comboBox at calibration completed page
jira: new
Change-Id: I4749a2206df16c438e0d3098e36274b2a20f313e
* ENH:update support for P1S plus
jira:[for p1s plus]
Change-Id: Id577d4e94e2162cb0045d261dfaa5f396ecded2f
* ENH: CLI: add mk information support
JIRA: no jira
Change-Id: Idd89b143d439de50d9f52eb8aec95b262d66875d
* ENH:calibration support p1p plus
jira:[plus]
Change-Id: Ia290d3a8a8b9adaac7a6ee26d9a8b5ea0c1b3aee
* FIX: add log for base_id and filament_id
github: #3087
Change-Id: Iebfbd0f224fce49f33fc81c71e6108f6e3abb5ff
* FIX: sync whole preset vendor directory
Change-Id: I191dbe979a87ff35d38cab1149b7975664344838
Jira: STUDIO-5534
(cherry picked from commit 628866608116336453804aa1217dd55db04d47ad)
* FIX: use t_utc for debug only
Change-Id: Ia05d8969d4de3dd38908980d6e17a3ebb11ca279
Github 3045
Change-Id: I77935df53bbf2772b1146e5c330c537165a3a2e6
* FIX:make sort_volumes right
Jira: STUDIO-5645
Change-Id: If324c9115bfaaf0c1b7b4be7c7ee96ba6b8ac890
* ENH:keep an unload logic
jira:[for unload]
Change-Id: Id30ec71ffa5b2dac89346ea47ca48a62479e3ab1
* FIX: several problems with mesh boolean
1. Cut with multiple volumes are OK now.
2. Close mesh boolean fail error with new object or open object
3. Fix wrong name and config of boolean resulting object
github: #3118
jira: none
Change-Id: If2c9dbfb36cbdfe4917a2371217923891bb7909c
(cherry picked from commit 982c0ecb92cf7c2b5ae5972ab900a6b10e7dda50)
* NEW:limit the length of project name
jira:[project name]
Change-Id: I955620f7073b3b7fda280d1118524f561d047751
* ENH:adjusting the warning level of timelpase
jira:[STUDIO-5662]
Change-Id: I4902b22d316f5e09a97a62c88b8a98e55c405434
* FIX: 3mf specification: change namespace form slic3rpe to BambuStudio
Jira: XXXX
Change-Id: Id705affc875ef23fdf2ac6d79f0cb0aafc4f7050
* NEW: Open MakerWorld With BambuStudio GetParam
JIRA: none
Change-Id: I0d65b364f1cd2d634a88882ab072c3e61ea89167
(cherry picked from commit 8eaf45e5359439a7c796fd79876c86775abcf48e)
* FIX: Filament issue generated when creating a printer
Jira: XXXX
Change-Id: I976770b69b47641bd54aa7a9c56fba7f58d1ab68
(cherry picked from commit ba42188b93c58b3954234d72acdd9769a68e3d3c)
* FIX: Blank page appears when editing presets
Jira: 5563
Change-Id: I4c49e05515b1beff55991e92f8079c4499c27eab
(cherry picked from commit e86517d290f4cd0765a230d811b0ddf2c9f34c17)
* FIX: context menu didn't update UI
jira: STUDIO-5691
Change-Id: Ia66b8623d832eba805aff5320941233a68ff258b
* FIX: crash of "filling bed"
"get_arrange_settings() const" gets trapped in infinite recursive calling.
Now we delete this function.
jira: STUDIO-5688
Change-Id: Ia39974734bb37b2a2f06b5bf78185f01be726872
* FIX: boolean hangs in the middle of color painting
Can't do splits in combine_mesh_fff, as do_boolean of mcut will split meshes.
jira: STUDIO-5693
Change-Id: Idddb7d20dd7ca386c39ddd3d87d9defc3136aa5d
(cherry picked from commit 6c67d015941458e37faaf0015b6509b5a0eadc0e)
* Fix: Fix a number of compilation problems
issues found when using gcc version 13.2.0 (GCC) in a Flatpak sandbox
github : https://github.com/bambulab/BambuStudio/issues/3074
github pull request: https://github.com/bambulab/BambuStudio/pull/3096
Change-Id: I08aeac593eb1ce7675894df72e8489200bae713d
(cherry picked from commit 069d133d66bfa682de4a860e379d5dc16b3d907c)
* fix: macos icns issue when icon was not attached
github pull request:https://github.com/bambulab/BambuStudio/pull/3116
Change-Id: I49072ad49f3af7669a6d307c791594ade210da50
(cherry picked from commit c977e5582e3a30ad16dd267810037423aad9a53c)
* FIX: Add flush_length for change_filament_gcode
Change-Id: I30f4b97d3d61c2a57f0e92f157cbd31c38aa7265
Jira: XXXX
(cherry picked from commit 92eb2bac977a0c4095b316cbbc6580fb5228b710)
* FIX: edit preset dialog can't close on mac
Jira: 5696
Change-Id: Ib33dfd07cc588ddd3805e3490a4d8c36dcd890ac
* ENH: add dev_ota_version in ssdp
JIRA: STUDIO-5740
Change-Id: Ic80e6d4b9bf82813fdc4a76604a3d36213d12b03
Signed-off-by: Stone Li <stone.li@bambulab.com>
* NEW:Adapt to multicolour and gradient colour
JIRA:xxxx
Change-Id: I8084cab603d5681cbcaf2d6f5e0d7ad5419cb2af
* NEW:Adaptation of semi transparent materials
JIRA: XXXX
Change-Id: Ie32d8ce67c37b85eb6d7d6594cb514a696307e68
* FIX: disable flush options if prime tower is unchecked
jira: STUDIO-5639
Change-Id: I25081584d430bc7d062e14bcc2cdbf7522cf9d99
* ENH: refine GetVersion for HMS query
JIRA: STUDIO-5763
Change-Id: Ia3ccc07d79cc0736eb12e9782da50211abb74772
Signed-off-by: Stone Li <stone.li@bambulab.com>
* FIX: Prefer old selection when sync AMS not compatible
Change-Id: I6b18db51887132a997cf78d70fff9a92e23bc44a
Jira: STUDIO-5416
(cherry picked from commit 077fae29823cf4f3071d408b1b40f55ee0cb33c6)
* FIX: The flushing was not auto-calc when sync ams list
JIRA: STUDIO-5551
1. flushing volume auto-calc when sync ams list
2. flushing volume takes the larger calculation value when filament has
multi-colors
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I72e6f9780ea56103a44c2da6068440a4615c254d
* FIX:fixed invalid links
jira:[fixed link]
Change-Id: I036a38b6e8e94da762f93805bd7be706538771fe
* FIX: Prompt to delete problematic presets
Jira: XXXX
Change-Id: Ic43f7bb782794d7ab0b6acbffbb5d73e94f6ed73
* FIX:fixed incorrect HMS content
jira:[STUDIO-5818]
Change-Id: Ia2896d6f0ab1ffedbc850e54168acece8e47bdbb
* FIX:external transparent material display error
JIRA: STUDIO-5845
Change-Id: I0a4f05ac5d5c0ac49d85a704ee65a7221c5f1e1d
* FIX: [5846] Custom Filament Page show System Filament
Simultaneously solve: When downloading Preset from the cloud, the filament_id of the preset in m_preset is null.
Jira: 5846
Change-Id: I6ba1b46fe92e345614b6a4af3fffa87d81fa2456
* FIX:A1 and p1 series do not support custom materials
JIRA:XXXX
Change-Id: Ib0459273d1f9a7152a5563757204634a8d0cd6f5
* FIX: exception when comparing profiles
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I946b5fcd35f779d271df2b3de731fdcada5aab29
(cherry picked from commit 00e739570812e5c4be3e0f7702ce8c72c0f9e72b)
* FIX: hide_id_middle_string
Change-Id: I28f32ec526b443d31d7992971b80ab1cb737deb6
Github: STUDIO-5825
* ENH: modify some logs level
JIRA: STUDIO-5958
Change-Id: I5a8592dfb8ffa9a81952535cb30944f867aa0e22
Signed-off-by: Stone Li <stone.li@bambulab.com>
* NEW:build plate marker detect
Change-Id: I70f03efea688bb6ce71c3f5990bb3c50605ab184
* FIX: Studio UI Freeze when saving user preset
github: #3335
Change-Id: Idaf53f673a3e46408826c06bdde2c592395d358b
* update bbl plugin version
* fix build errors
* update bbl profiles
* update color
---------
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Signed-off-by: Stone Li <stone.li@bambulab.com>
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com>
Co-authored-by: gerrit <gerrit@bambulab.com>
Co-authored-by: liz.li <liz.li@bambulab.com>
Co-authored-by: tao wang <tao.wang@bambulab.com>
Co-authored-by: lane.wei <lane.wei@bambulab.com>
Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com>
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
Co-authored-by: zhou.xu <zhou.xu@bambulab.com>
Co-authored-by: Arthur <arthur.tang@bambulab.com>
Co-authored-by: Bastien Nocera <hadess@hadess.net>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: hu.wang <hu.wang@bambulab.com>
Co-authored-by: Stone Li <stone.li@bambulab.com>
Co-authored-by: XunZhangBambu <xun.zhang@bambulab.com>
* Added K1C and fixed some settings (took from config files instead of Creality Print)
* Files renaming
* New PLA-CF, prettify json for K1C, naming uniformisation, ...
* Port Special PLA profiles to K1/K1 Max
* Changed slow down layer time and slow down min speed in order to improve overall speed on details.
* Raised PLA bed temp to 55°C
* Optimisations for ABS, ASA and added Generic PC profile.
* Added PA-CF and fixed PC profiles.
* Added new filaments to default materials
This is a port of the EditGCodeDialog from PrusaSlicer 2.7.x. There were
a few changes made to make it a bit more functional. Also, it isn't
quite fully complete, but it should be in a very usable state.
General Changes:
- Implement UndoValueUIManager and EditValueUI in Field
- Implement EditGCodeDialog and add buttons to the tabs
- Other minor changes to accommodate the new classes
Differences from PrusaSlicer's Implementation:
- backported to wxWidgets 3.1.5 (reverse commit 8770c4b7 after updating
to 3.2.x)
- icons have been updated to use Orca colors
- improve the report that tells you if certain placeholders have not
been defined properly for the dialog. It now shows all issues at once
rather than having to fix then recompile to see the next issue.
- allow the use of the cmake option `ORCA_CHECK_GCODE_PLACEHOLDERS` to
toggle the above report since our workflow rarely uses debug mode.
- if a custom gcode value is not set when checking gcode placeholders, a
testing value is set. Custom gcode is not parsed if it is empty, and the
only way to check if the placeholders are all defined is by running the
placeholder operation on the custom gcode.
- some calls to `print.config()` in Gcode.cpp were changed to `m_config`
to support the above testing values feature (only m_config is modified
with the placeholders and `print.config()` would return an empty string)
- a macro has been added to quickly add a definition to
SlicingStatesConfigDefs with less boiler plate (it could technically be
used for any ConfigOptionDef, but that would hurt interoperability with
PS. I tried to not use the macro for too many PS defined definitions.)
- the presets are now also categorized by the page they are on in their
tab
<table>
<tr>
<td>Prusa
<td>Orca
<tr>
<td>
<img
src="https://github.com/SoftFever/OrcaSlicer/assets/24759591/27cb4f48-d225-4563-9aeb-b2b461f8bff5"
/>
<td>
<img
src="https://github.com/SoftFever/OrcaSlicer/assets/24759591/4fcd8cde-2427-4d1a-a0ed-1738b570b919"
/>
</table>
TODO:
- [x] Make sure all linux fixes have been applied
- [x] Finish adding "universal" gcode options
- [x] add search function to dataview (maybe?)
- [x] determine if any options are being left out of the preset
categories by getting options from Tab rather than Presets. If so,
consider adding outside of the groupings
* Add button to add model info
* Initial impl of project info editor
* Add sidebar item to edit project info
* Add license selector
* Fix use of deprecated apis
* Fix license combox dark mode
* Add back button on project info editor screen
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Machine G-code Fix
* Merge branch 'SoftFever:main' into main
* 0109 Update end code and process
* 0109 new update
* 0109 Profile Update for end gcode
* Merge branch 'main' into main
* Support custom IP camera
Allow adding custom IP camera source while keeping possible
built-in bambulab camera also functional and add button to
switch between them.
This uses WebView widget to show the stream. Upon loading the
page, javascript is used to remove native controls and scroll-
bars for aesthetic reasons.
* Add partial support for PiP video
HTMLVideoElement supports picture-in-picture video
but the dedicated control is hidden in this implementation
to have more integrated look in OrcaSlicer. Add right-click
listener to the camera switch icon that opens the video element
in a PiP window.
Only works when the video is in <video> HTML element, so for
example MJPEG streams in <img> element won't work.
* 10-25
Add TPU-95A HF
* 1030
Adding Introduction of Chamber Temperature Control Macros(M191) to Notes
* 1102
Add ABS-GF10 profile，
Remove a extra "s" from the "0.36mm Standard @Qidi XPlus3 0.6 nozzle.json" file
* 1106
Add the PA value to some genetic filament profiles
* Add new filaments profiles
Add new filaments profiles
* 1
1
* Add two new filaments
Add two new filaments
* Optimized 0.2mm nozzle profiles
Optimized 0.2 mm nozzle QIDI Generic ABS/PETG/PLA profiles
* disable prime tower
disable prime tower and independent_support_layer_height,
Improve some part of the surface when supported
* Fix the name issue
Fix the name issue
Orca: Added option to use CMake config option ORCA_CHECK_GCODE_PLACEHOLDERS to check custom gcode placeholders rather than using debug
Original Commit: prusa3d/PrusaSlicer@b8bb7f2
Co-authored-by: YuSanka <yusanka@gmail.com>
Included pre-generated files specific to Orca rather than PS provided files
Original Commit: prusa3d/PrusaSlicer@55d5921
Co-authored-by: YuSanka <yusanka@gmail.com>
* Fixed retraction speed and added missing parameters.
* Fixes for manual filament change
* More tunings and fixes.
* Fixes and tunings
* Formatting
* Decrease z-hop for K1
* Updated thumbnails sizes to the same as Creality Print has.
* Updated French translations.
* Reword "strength"
* Updated translations
* Added missing translations.
* Fixed place on face translation
* Fixed strings.
* Updated locales
* Better translation for "Brim ears"
* Other round of fixes
* Added missing strings
* Renaming studio to Orca.
* Rewording "Arc fitting"
* Flush means purge and not "rinçage"
* 10-25
Add TPU-95A HF
* 1030
Adding Introduction of Chamber Temperature Control Macros(M191) to Notes
* 1102
Add ABS-GF10 profile，
Remove a extra "s" from the "0.36mm Standard @Qidi XPlus3 0.6 nozzle.json" file
* 1106
Add the PA value to some genetic filament profiles
* Add new filaments profiles
Add new filaments profiles
* 1
1
* Add two new filaments
Add two new filaments
* Added Creality Ender 3 V3 SE.
* Fixed fine profile.
* Optimized first layer speed (based on Creality Print)
* Brought back Ender-5 (2019)
* Setting Marlin 2 as gcode flavor
* Use inheritance for Ender-3 V3 filament profiles.
* Various improvements.
* Temperature optimisations (less power consumption)
* Fixed some log errors.
* Optimizations
* Reverted support_interface_top_layers
* Added correct jerk and acceleration settings.
* Added retraction speed.
* Re-added missing Ender-5 references in filaments.
* Reverted slow_down_layer_time, Creality print is too optimistic on this at least for Ender 3 V3 SE.
* Optimizations for supports (easier to remove)
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
