jira:[STUDIO-6649]
If the model comes from model mall, the name from the mall will be used when sending and printing. When there are special characters in the name, it will cause the sending to fail.
Change-Id: I324441cc7177e7062b79280c5d23afe9eeb5e4c2
(cherry picked from commit 1bcf30c39c648763952703c9060573baa2782f87)
Co-authored-by: tao wang <tao.wang@bambulab.com>
* Additional control over bridges
* Label updates
* Detect and handle layers over external bridges
* Label updates
* To-Do placeholders
* Filter out small external bridges
* Apply safety offset for internal bridge polygon intersections
* code comments
* Increase bridge offsets to 3 perimeters total (1.5 perimeter in each dimension)
* Filter out bridges based on perimeter counts to focus bridge on areas where bridge infill is actually generated in the end.
* Fixing bugs
* Convert tick boxes to drop down menu
* Additional geometry checks for second internal bridge to ensure no small polygons are left over.
* Minor code refactor for clarity
* Further refinements in polygon logic
* Polygon logic refinements pt3
* Further union operations to ensure clean geometry
* Fix compile error
* Clean up constructors
* Only create bridges on stInternalSolid areas, not sparse infill.
* Refactor internal second bridge logic to stand alone parallel for loop to avoid thread deadlocks
* Revert change to only consider stInternalSolid areas for second internal bridge layer.
This resulted in partly unsupported solid infill areas above as the remainder was too narrow to generate sparse infill
* Updated beta statements and tooltip changes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Make the "Open in Orca Slicer" button on Thingiverse work by informing
the system that Orca Slicer is the application to handle URLs with the
orcaslicer scheme.
This fixes this error message visible in Firefox' console when clicking
the button on the website:
Prevented navigation to “orcaslicer://open?file=https%3A%2F%2Fwww.thingiverse.com%2Fdownload%3A14134689” due to an unknown protocol.
See https://github.com/bambulab/BambuStudio/commit/62006bba30f39
PROBLEM
• Current color palette has many repeating or very similar colors
• Colors looks came from 80s and all raw colors like rgb(0,255,255)
• Black and White colors shows less details on surfaces due to shadows
and highlights
SOLUTION
• Picked more specific color tones. Tried to make every alternative to
easily identifiable
• Didnt used black, white or gray
QUESTIONABLE
• New colors follows given order and i used orca color as first. Maybe
orange one is better pick
• I can add, remove, or change order of colors
COMPARISON
before
after
old color set
new color set
as text if you want to experiment
`
wxColour("#00C1AE"),
wxColour("#F4E2C1"),
wxColour("#ED1C24"),
wxColour("#00FF7F"),
wxColour("#F26722"),
wxColour("#FFEB31"),
wxColour("#7841CE"),
wxColour("#115877"),
wxColour("#ED1E79"),
wxColour("#2EBDEF"),
wxColour("#345B2F"),
wxColour("#800080"),
wxColour("#FA8173"),
wxColour("#800000"),
wxColour("#F7B763"),
wxColour("#A4C41E"),
`
**The latest download link can be found from the "Checks" tab above or
[here](https://github.com/SoftFever/OrcaSlicer/pull/8256/checks). There
should be an "artifact" dropdown on top of that page once the build is
completed.**
This PR solves the following problems:
- Bind printers in different subnet
- Binded LAN printers are not automatically connected when switching to
Device tab
Few improtant things to know:
The automatic printer info detection (ie, the step in the first image)
doesn't work on MacOS, when you click "Connect" you will immediately be
prompted to the second image to enter the printer details. (I don't know
why but Bambu does not provide this capability on MacOS for their
network plugin)
AFAIK, P1 series do not support automatic printer info detection (as
tested by @SoftFever and myself), so the first step is gauranteed to
fail, which is unfortunate but expected. Simply click the "Manual Setup"
button (which will appear after clicking the "Connect" button then wait
for a while) and enter the printer detail and you should be good to go.
If anything entered wrong, you could simply unbind the printer and do it
all over again.
I know current binding flow is not very user-friendly, but consider how
rare this will be used, I think it's OK. Given the current situation
this is the best I could do with the closed-source Bambu network plugin.
I only have a P1 so I couldn't throughly test this PR. Please if you
have different printers and home network configurations, your feedback
are valuable to help validating and improving this PR, thanks in
advance!
Fix#6169Fix#8097
Calculate toolbar icon size the same way as it done on windows:
manipulate icon size, not toolbar scale.
Scaling icons this way makes images sharper since they getting
rasterized to a target size rather than being rasterized for 40px and
scaled to a desired size later.
* glcanvas: add modifiers to mouse events logging
* glcanvas: workaround for touchpad nav on Win
Releasing ALT on windows platform result in GLCanvas losing focus.
Because of this mouse movements not being processed by on_mouse() event
handler and camera rotation have not cleaned up.
Make a workaround for Windows to cleanup camera rotate state on
releasing ALT modifier.
* Add support for perlin noise fuzzy skin
* Support multiple types of coherent noise
* Updated tooltips for more clarity.
* Reorder options as suggested by @discip
* Fix accidental removal of &
* Move libnoise to deps
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Gcode Statistics Panel - Persist open/close state
Bug: On slicing a model, the Statistics Panel would be reset to being open (regardless of if the user had shut it earlier)
Fix: Now on app open the Statistics Panel will be open, but if the user closes it, its state will persist (regardless of slicing again)
https://github.com/SoftFever/OrcaSlicer/discussions/6021
* Gcode Statistics Panel - fold/unfold button width fix
Issue: The fold/unfold button width is too wide (It seems CalcTextSize is making the button wider than necessary)
Fix: Set the width to a correct fixed value
* Avoid updating same vendor multiple times and unnecessary version checks
* Fix custom profiles added/removed each other run (SoftFever/OrcaSlicer#8094)
Co-authored-by: Dima Buzdyk <46728448+buzzhuzz@users.noreply.github.com>
---------
Co-authored-by: Dima Buzdyk <46728448+buzzhuzz@users.noreply.github.com>
* FIX:update custom_texture when new_shape=false
Jira: STUDIO-5287
Change-Id: I3add95f9f9345c14a48cc7467513d1b3ce95f4c9
(cherry picked from commit 9ce7de10f4a5f1723439fbefea98595fcf678d69)
* FIX: correct the bed model to the print area origin point
Change-Id: Ieb856dff421d39694966e3c13c519f4ffa3da5c2
(cherry picked from commit 32892514ff)
* Avoid unnecessary copy of `position` parameter
* Merge branch 'main' into bugfox/plater-y
