Thomas
e95afd7182
Ender 3 V3 initial commit ( #5127 )
...
* Ender 3 V3 initial commit
* Fixed bad naming
2024-04-29 23:51:53 +08:00
Thomas
d3c9e4d099
Creality K1 series improvements ( #5081 )
...
* Improved some configurations for K1 printers
* Removed seam_slope_min_length for K1
* Increased wipe distance
* Enabled slope on entire wall
* Removed retract_before_wipe
* Improved overhang print speed
* Prettified JSON
* Prettified machines JSON
2024-04-22 20:02:55 +08:00
Stevetm2
3acd8a2bb4
Initial add of Creality Sermoon V1 Printer and 3 process configs ( #4956 )
...
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Update Creality Sermoon V1 0.4 nozzle.json
Changed the default process for the Sermoon V1 Printer.
* Update 0.20mm Standard @Creality Sermoon V1.json
Reduced speeds of .20mm process for Sermoon V1 to no more than 195mm/s as not all printers which may use this are running Klipper. It is set to Marlin for the flavour but is targeted at a Klippered printer.
* Update 0.16mm Optimal @Creality Sermoon V1.json
Remove Arc Fitting and reduce elephant foot.
* Update 0.20mm Standard @Creality Sermoon V1.json
Remove Arc Fitting and reduce elephant foot.
* Update 0.28mm Standard @Creality Sermoon V1.json
Remove Arc Fitting and reduce elephant foot.
2024-04-15 23:10:13 +08:00
Denis Anikin
78ee7f5074
fix processes for Creality Ender3V3SE 0.4 nozzle ( #4785 )
2024-04-09 20:40:50 +08:00
cochcoder
70427e1c3f
QOL improvments to Ender 3 V3 KE G-Code ( #4675 )
...
* Add M420 S1; Enable mesh leveling
* Implament various improvments
* Readd F1500.0 & end the second pass a bit shorter
* Remove extra \n's
* Remove \nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800
* Misc
Enable arc fitting
Support line width to 0.42
Elephant foot compensation to 0.15
* Apply given settings
* Enable infill combination
* Change wipe_distance to 2
* Reduce elephant foot compensation to 0.1
* Adjust bridging & overhang speeds & disable retract before wipe
* Tune speed & max values
* Change min_layer_height & support z distance
* revert min_layer_height
2024-04-09 20:36:32 +08:00
cochcoder
7910e2aecc
Add Creality Ender-3 S1 Plus ( #4674 )
...
* Add Creality Ender-3 S1 Plus
* Misc
* Fix nozzle_diameter
* Add printer_variant value
* Change build plate model/texture to use Ender-3 V3 SE
* Enable mesh leveling
* Up max travel acceleration to 5000
* Enable infill_combination
* Add Draft profiles
* Change buildplate model/texture
* Fix build plate model
* Add retraction & detraction speed & change retraction length
* Add filament_ to the beginning
* Revert retraction & detraction speed & retraction length
* Tests
Trying to change retract and detract speed as well as retraction length
Also trying to have Z-hop only happen on top layers
* Apply new values to other nozzles
* disable z_hop
* Lower build plate model
* Resolve merge conflicts
* temporarily remove Ender-3 S1 Plus
* Re-add Ender-3 S1 Plus
2024-03-29 18:14:56 +08:00
cochcoder
64d0c324c1
Add Creality CR-10 SE ( #4757 )
...
* Add CR-10 SE and standard profiles
* Misc
Add more perimeters to CR-10 SE profiles
Add printer to filament profiles
Link everything in Creality.json
* Fix two bugs
* Forgot this
2024-03-29 17:57:01 +08:00
cochcoder
a2d24cd67f
Add Ender-3 V3 SE .2, .6, .8 and fix small Ender-3 Pro bug ( #4653 )
...
* Add Ender-3 V3 SE .2, .6, .8 and fix small Ender-3 Pro bug
* Forgot to remove these
* Fix error
* Remove these...
* Why did I delete this?
* Revert deletion
* Add missing profiles
* Create 0.24mm Draft @Creality Ender3V3KE.json
* Apply new nozzle sizes to generic filament
* Maybe this will do it
* Revert 0.4 renames & add to Generic ABS
* Add M420 S1; Enable mesh leveling
* Fix wring nozzle_diameter
* Potentially fix the issue of printer not being added after selected
2024-03-27 22:55:49 +08:00
cochcoder
8d4a47301a
Add Ender-3 Pro ( #4573 )
...
* Add Ender-3 Pro cover
* Add Ender-3 Pro
* Add Ender-3 Pro .2, .4, .6, and .8
* Add Ender-3 Pro processes
* Delete Ender-3 Pro_cover.png
* Add a smaller version of Ender-3 Pro_cover.png
* Delete Ender-3 Pro_cover
* Further image improvements
2024-03-19 19:44:50 +08:00
Thomas
dec33a93e8
Ender 3 V3 : Some improvements for supports and machines limits ( #4527 )
...
* Some improvements for supports and machines limits
* Increase z-hop for KE to avoid the nozzle hit the parts
* Changed jerk V3 KE settings to more logical values.
* Decreased jerk
* Speed, acceleration and jerk settings fine-tunings.
2024-03-18 22:52:29 +08:00
Thomas
56ce711c48
Ender 3 V3 SE/KE improvements ( #4225 )
...
* Set default brim width and added new 0.24 quality profile
* Fixed 0.24 name
2024-02-27 22:09:07 +08:00
goyetus
31d1d03578
Creality Ender 3 and Prusa Mk3s 0,2;0,4,06 and 0,8 profiles ( #4029 )
...
* Ender 3 - All nozzles and Quality Profiles
Ender 3 Profiles.
0.20 Nozzle
0.40 Nozzle
0.60 Nozzle
0.80 Nozzle
0.12 to 0.24 Quality Profiles for every Nozzle in Process Folder
* all
all
* Ender 3 Profiles
Ender 3 Profiles for: 0,2;0,4;0,6;0,8
5 Different and independent Quality profiles for each Nozzle.
Fine, Optimal, Standard, Draft and Superdraft
* aa
aa
* aa
aa
* aa
aa
* Prusa Mk3s Profiles
Prusa Mk3s Profiles
* Mk3s FIXED
mk3s FIXED
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
2024-02-11 10:25:18 +08:00
Thomas
48541be681
Creality K1 Profiles improvements (and K1C addition) ( #3728 )
...
* Added K1C and fixed some settings (took from config files instead of Creality Print)
* Files renaming
* New PLA-CF, prettify json for K1C, naming uniformisation, ...
* Port Special PLA profiles to K1/K1 Max
* Changed slow down layer time and slow down min speed in order to improve overall speed on details.
* Raised PLA bed temp to 55°C
* Optimisations for ABS, ASA and added Generic PC profile.
* Added PA-CF and fixed PC profiles.
* Added new filaments to default materials
2024-01-24 14:19:36 +00:00
Thomas
ff291a4ab8
New generic profile for Ender 3 V2 Neo ( #3434 )
...
* Added generic profile for Ender 3 V2 Neo
* Disable skirt, because a purge line is drawn
* Added printer_structure
2024-01-14 23:07:35 +08:00
Thomas
98a9bf6170
Creality Ender 3 V3/KE important fixes and some fine-tunings ( #3362 )
...
* Fixed retraction speed and added missing parameters.
* Fixes for manual filament change
* More tunings and fixes.
* Fixes and tunings
* Formatting
* Decrease z-hop for K1
* Updated thumbnails sizes to the same as Creality Print has.
2023-12-31 18:36:32 +08:00
SoftFever
f89932f63e
make exclude_object off by default
2023-12-29 09:21:49 +08:00
Thomas
2901c85ea9
Fixes and simplification of some Creality profiles. ( #3315 )
...
* Fixes and simplification of some Creality profiles.
* Set correct support_air_filtration for K1 Max
2023-12-29 00:02:01 +08:00
Thomas
f5cbe6a38b
New profile for Creality Ender 3 V3 KE ( #3216 )
...
* Added Creality Ender 3 V3 SE.
* Fixed fine profile.
* Optimized first layer speed (based on Creality Print)
* Brought back Ender-5 (2019)
* Setting Marlin 2 as gcode flavor
* Added Ender 3 V3 KE Profile
* Use inheritance for Ender-3 V3 filament profiles.
* Various improvements.
* Temperature optimisations (less power consumption)
* Added Ender 3 V3 KE Profile
* Tweaks for KE integration.
* Fixed some log errors.
* Optimizations
* Optimizations.
* Reverted support_interface_top_layers
* Added correct jerk and acceleration settings.
* Added correct jerk and acceleration.
* Added retraction speed.
* Re-added missing Ender-5 references in filaments.
* Inherits processes from process_common_klipper
* Reverted code simplification for inherited profiles.
2023-12-21 08:51:18 +00:00
Thomas
888096d75c
New profile for Creality Ender 3 V3 SE ( #3180 )
...
* Added Creality Ender 3 V3 SE.
* Fixed fine profile.
* Optimized first layer speed (based on Creality Print)
* Brought back Ender-5 (2019)
* Setting Marlin 2 as gcode flavor
* Use inheritance for Ender-3 V3 filament profiles.
* Various improvements.
* Temperature optimisations (less power consumption)
* Fixed some log errors.
* Optimizations
* Reverted support_interface_top_layers
* Added correct jerk and acceleration settings.
* Added retraction speed.
* Re-added missing Ender-5 references in filaments.
* Reverted slow_down_layer_time, Creality print is too optimistic on this at least for Ender 3 V3 SE.
* Optimizations for supports (easier to remove)
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
2023-12-20 19:56:13 +08:00
StdVectorBool
2174cd6999
FIX: K1/Max profiles use consistently higher accelerations ( #3052 )
...
* FIX: K1/Max consistently increase Default accel to match Creality.
* FIX: K1/Max consistently decrease initial_layer_acceleration.
* FIX: K1/Max consistently increase Top accel to match Outer Wall quality.
* FIX: K1/Max consistently increase Travel accel instead of inherited slow default.
* More tweaks
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
2023-12-11 22:03:09 +08:00
Paul
0bf65aa217
Additional Nozzles for the Creality Ender-5 Pro (2019) ( #2964 )
...
* Add 0.6mm Nozzle Configurations for CE5Pro
* Add 0.5mm Nozzle Configurations for CE5Pro
* Add Nozzle Size Printer Variants 0.2-1.0mm
* Add 0.3mm Printer Variant
* Add 0.5mm Printer Variant
* Fix: 0.6mm Printer Variant
* Add Remaining Printer Variants
* Add CE5Pro Nozzles to list of Compatible Filament
* Add Generic FDM Process for Creality 0.3 Nozzle
* Update Generic FDM Process for Creality 0.6 Nozzle
* Add FDM Process for Remaining Creality Nozzle
* Add Processes For CE5Pro 0.8mm Nozzle
* Add Processes For CE5Pro 1.0mm Nozzle
* Add Processes For CE5Pro 0.2mm Nozzle
* Fix Initial Layer Settings
* Add Processes For CE5Pro 0.25mm Nozzle
* Add Processes For CE5Pro 0.3mm Nozzle
* Remove Profiles Outside their Min/Max Layer Height
* Update CE5Pro 0.4 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.2 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.25 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.3 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.5 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.6 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.8 Nozzle Naming Scheme to PR1100
* Update CE5Pro 1.0 Nozzle Naming Scheme to PR1100
* Incl. Remaining Base Config That Diff Is Based On
* Remove whitespace
* Revert from Nozzle Naming Scheme in PR1100
* Update Nozzle Names
* Revert "Incl. Remaining Base Config That Diff Is Based On"
This reverts commit 87e15d621b2d8e2d2677036285e2a4677125dcdf.
These settings were already captured by fdm_process_creality_common.json
* Fix Indentations
2023-12-03 12:02:03 +08:00
SoftFever
f899025363
Revert "Adding new nozzle profiles for the Creality Ender-5 Pro (2019) ( #2817 )"
...
This reverts commit eab8139d3c
2023-12-02 10:24:12 +08:00
Paul
eab8139d3c
Adding new nozzle profiles for the Creality Ender-5 Pro (2019) ( #2817 )
...
* Add 0.6mm Nozzle Configurations for CE5Pro
* Add 0.5mm Nozzle Configurations for CE5Pro
* Add Nozzle Size Printer Variants 0.2-1.0mm
* Add 0.3mm Printer Variant
* Add 0.5mm Printer Variant
* Fix: 0.6mm Printer Variant
* Add Remaining Printer Variants
* Add CE5Pro Nozzles to list of Compatible Filament
* Add Generic FDM Process for Creality 0.3 Nozzle
* Update Generic FDM Process for Creality 0.6 Nozzle
* Add FDM Process for Remaining Creality Nozzle
* Add Processes For CE5Pro 0.8mm Nozzle
* Add Processes For CE5Pro 1.0mm Nozzle
* Add Processes For CE5Pro 0.2mm Nozzle
* Fix Initial Layer Settings
* Add Processes For CE5Pro 0.25mm Nozzle
* Add Processes For CE5Pro 0.3mm Nozzle
* Remove Profiles Outside their Min/Max Layer Height
* Update CE5Pro 0.4 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.2 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.25 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.3 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.5 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.6 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.8 Nozzle Naming Scheme to PR1100
* Update CE5Pro 1.0 Nozzle Naming Scheme to PR1100
* Incl. Remaining Base Config That Diff Is Based On
* Remove whitespace
2023-11-29 22:32:58 +08:00
Jason Pell
b3db0a560a
the layer height should be 0.24 not 0.2 ( #2779 )
2023-11-18 13:43:57 +08:00
SoftFever
5213fbfa86
Support initial_tool variable for filename format
2023-11-13 22:25:32 +08:00
Thomas
25447877c6
Config changes for Creality K1/K1 Max ( #2380 )
...
* Update 0.16mm Optimal @Creality K1 (0.4 nozzle).json
Improved K1 0.16mm profile
* Improved 0.20mm Standard @Creality K1 (0.4 nozzle).json
* Improved 0.24mm Draft @Creality K1 (0.4 nozzle).json
* Create Creality High Flow Hotend PLA.json
* Create fdm_filament_tpu.json
* Create fdm_filament_asa.json
* Create Creality Generic ASA.json
* Update Creality Generic PLA.json
* Create Creality Generic Speed PLA.cfg
* Rename Creality High Flow Hotend PLA.json to Creality High Flow Hotend Generic PLA.json
* Rename Creality Generic Speed PLA.cfg to Creality High Flow Hotend Generic Speed PLA.cfg
* Update Creality Generic ASA.json
* Update Creality K1 (0.4 nozzle).json
* Update Creality K1 (0.6 nozzle).json
* Update Creality K1 (0.8 nozzle).json
* Update Creality Generic ASA.json
* Rename Creality High Flow Hotend Generic PLA.json to Creality HF Generic PLA.json
* Rename Creality High Flow Hotend Generic Speed PLA.cfg to Creality HF Generic Speed PLA.cfg
* Update Creality Generic PLA.json
* Update 0.24mm Draft @Creality K1 (0.4 nozzle).json
* Update Creality HF Generic PLA.json
* Update Creality HF Generic Speed PLA.cfg
2023-10-14 10:59:51 +08:00
Christophe Fonteyne
bd13d83385
Added profile for Creality CR-6 SE and CR-6 Max ( #2040 )
...
* Added profile for CReality CR-6 SE and CR-6 Max
* Removed merge conflict artifacts
* Removed duplicate process_list
* Fixed many bugs. Profile now loads correctly in 1.7.0-beta
* fixed filament dependencies for CR-6
2023-09-17 11:21:07 +08:00
RandomGgames
f2d5cce8cf
Add ender-3 printer ( #2053 )
...
* Add ender-3 printer option
* Added image and standard 0.2mm process
* Added Ender 3
* Removed a stray empty line
* fix e3
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
2023-09-14 20:55:33 +08:00
SoftFever
e624632969
semm
2023-09-09 13:19:59 +08:00
Sadri ERCAN
11668bc506
Turkish Language update & New Printer Profiles ( #2016 )
...
* Turkish Language update with latest strings
Turkish Language update with latest strings
* New Printer Profiles Added
Creality K1-K1 Max
Elegoo Neptune 4 - Neptune Pro profiles added.
Adapted based on GalaxySlicer profile files.
GalaxySlicer Repo: https://github.com/fr3ak2402/GalaxySlicer
* Elegoo Neptune 4 Profile Files
Elegoo Neptune 4 Profile Files Update
2023-09-06 22:22:28 +08:00
SoftFever
2a478ab4f9
post changes after merging BS1.7.4
...
Remove tracking etc..
2023-08-26 18:45:43 +08:00
SoftFever
e65b11a831
Merge remote-tracking branch 'BS/v1.7.2'
...
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
# Conflicts:
# .github/ISSUE_TEMPLATE/bug_report.md
# .github/workflows/build_ubuntu.yml
# .gitignore
# Containerfile
# Dockerfile
# README.md
# deps/Boost/Boost.cmake
# deps/OpenEXR/OpenEXR.cmake
# deps/OpenVDB/OpenVDB.cmake
# doc/How to build - Mac OS.md
# localization/i18n/OrcaSlicer.pot
# localization/i18n/de/OrcaSlicer_de.po
# localization/i18n/en/OrcaSlicer_en.po
# localization/i18n/es/OrcaSlicer_es.po
# localization/i18n/fr/OrcaSlicer_fr.po
# localization/i18n/hu/OrcaSlicer_hu.po
# localization/i18n/it/OrcaSlicer_it.po
# localization/i18n/ja/OrcaSlicer_ja.po
# localization/i18n/list.txt
# localization/i18n/nl/OrcaSlicer_nl.po
# localization/i18n/sv/OrcaSlicer_sv.po
# localization/i18n/zh_cn/OrcaSlicer_zh_CN.po
# resources/i18n/de/BambuStudio.mo
# resources/i18n/en/BambuStudio.mo
# resources/i18n/es/BambuStudio.mo
# resources/i18n/fr/BambuStudio.mo
# resources/i18n/hu/BambuStudio.mo
# resources/i18n/it/BambuStudio.mo
# resources/i18n/ja/BambuStudio.mo
# resources/i18n/nl/BambuStudio.mo
# resources/i18n/sv/BambuStudio.mo
# resources/i18n/zh_cn/BambuStudio.mo
# resources/images/im_all_plates_stats.svg
# resources/profiles/Anker.json
# resources/profiles/Anker/filament/Generic ASA @Anker.json
# resources/profiles/Anker/filament/Generic PA @Anker.json
# resources/profiles/Anker/filament/Generic PA-CF @Anker.json
# resources/profiles/Anker/filament/Generic PC @Anker.json
# resources/profiles/Anker/filament/Generic PETG @Anker.json
# resources/profiles/Anker/filament/Generic PLA-CF @Anker.json
# resources/profiles/Anker/filament/Generic PVA @Anker.json
# resources/profiles/Anker/filament/Generic TPU @Anker.json
# resources/profiles/Anker/machine/Anker M5 0.4 nozzle.json
# resources/profiles/Anker/machine/Anker M5.json
# resources/profiles/Anker/machine/Anker M5C 0.4 nozzle.json
# resources/profiles/Anker/machine/Anker M5C.json
# resources/profiles/Anker/machine/fdm_machine_common.json
# resources/profiles/Anker/process/0.05mm Ultradetail @Anker.json
# resources/profiles/Anker/process/0.15mm Fast @Anker.json
# resources/profiles/Anker/process/0.20mm Fast @Anker.json
# resources/profiles/Anker/process/0.20mm Standard @Anker.json
# resources/profiles/Anker/process/0.25mm Fast @Anker.json
# resources/profiles/Anker/process/fdm_process_common.json
# resources/profiles/Anycubic.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 2 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 2.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro.json
# resources/profiles/Anycubic/machine/Anycubic Chiron 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Chiron.json
# resources/profiles/Anycubic/machine/Anycubic Kobra 2 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Kobra Max 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Kobra Max.json
# resources/profiles/Anycubic/machine/Anycubic Vyper 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Vyper.json
# resources/profiles/Anycubic/machine/Anycubic i3 Mega S 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic i3 Mega S.json
# resources/profiles/Anycubic/machine/fdm_machine_common.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json
# resources/profiles/Anycubic/process/fdm_process_common.json
# resources/profiles/BBL.json
# resources/profiles/BBL/process/fdm_process_bbl_common.json
# resources/profiles/Creality.json
# resources/profiles/Creality/filament/fdm_filament_abs.json
# resources/profiles/Creality/filament/fdm_filament_pla.json
# resources/profiles/Creality/machine/Creality CR-10 Max 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-10 Max.json
# resources/profiles/Creality/machine/Creality CR-10 V2 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-10 V2.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 Pro.json
# resources/profiles/Creality/machine/Creality Ender-3 S1.json
# resources/profiles/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 V2.json
# resources/profiles/Creality/machine/Creality Ender-5 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 Plus.json
# resources/profiles/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 S1.json
# resources/profiles/Creality/machine/Creality Ender-5.json
# resources/profiles/Creality/machine/Creality Ender-5S 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5S.json
# resources/profiles/Creality/machine/Creality Ender-6 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-6.json
# resources/profiles/Creality/machine/fdm_creality_common.json
# resources/profiles/Creality/machine/fdm_machine_common.json
# resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json
# resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json
# resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json
# resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json
# resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json
# resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json
# resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json
# resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json
# resources/profiles/Creality/process/0.24mm Draft @Creality.json
# resources/profiles/Creality/process/fdm_process_creality_common.json
# resources/profiles/Custom/filament/My Generic PETG.json
# resources/profiles/Custom/filament/My Generic PLA.json
# resources/profiles/Elegoo.json
# resources/profiles/Elegoo/filament/fdm_filament_common.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2D 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2D.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2S 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2S.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Max 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Max.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Plus 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Plus.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Pro 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Pro.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3.json
# resources/profiles/Elegoo/machine/Elegoo Neptune X 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune X.json
# resources/profiles/Elegoo/machine/Elegoo Neptune.json
# resources/profiles/Elegoo/machine/fdm_machine_common.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo NeptuneX.json
# resources/profiles/Prusa.json
# resources/profiles/Prusa/filament/fdm_filament_common.json
# resources/profiles/Prusa/machine/Prusa MINI 0.4 nozzle.json
# resources/profiles/Prusa/machine/Prusa MINI.json
# resources/profiles/Prusa/machine/Prusa MK3S 0.4 nozzle.json
# resources/profiles/Prusa/machine/Prusa MK3S.json
# resources/profiles/Prusa/machine/fdm_machine_common.json
# resources/profiles/Prusa/process/0.20mm Standard @MINI.json
# resources/profiles/Prusa/process/0.20mm Standard @MK3S.json
# resources/profiles/Qidi.json
# resources/profiles/Qidi/filament/fdm_filament_abs.json
# resources/profiles/Qidi/filament/fdm_filament_asa.json
# resources/profiles/Qidi/filament/fdm_filament_common.json
# resources/profiles/Qidi/filament/fdm_filament_pa.json
# resources/profiles/Qidi/filament/fdm_filament_pc.json
# resources/profiles/Qidi/filament/fdm_filament_pet.json
# resources/profiles/Qidi/filament/fdm_filament_pla.json
# resources/profiles/Qidi/filament/fdm_filament_pva.json
# resources/profiles/Qidi/filament/fdm_filament_tpu.json
# resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-CF Pro.json
# resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Max 3.json
# resources/profiles/Qidi/machine/Qidi X-Max.json
# resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Plus 3.json
# resources/profiles/Qidi/machine/Qidi X-Plus.json
# resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Smart 3.json
# resources/profiles/Qidi/machine/fdm_machine_common.json
# resources/profiles/Qidi/machine/fdm_qidi_common.json
# resources/profiles/Qidi/machine/fdm_qidi_x3_common.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json
# resources/profiles/Qidi/process/fdm_process_common.json
# resources/profiles/Qidi/process/fdm_process_qidi_common.json
# resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json
# resources/profiles/Tronxy/filament/Tronxy Generic ABS.json
# resources/profiles/Tronxy/process/0.12mm Fine @Tronxy.json
# resources/profiles/Tronxy/process/0.15mm Optimal @Tronxy.json
# resources/profiles/Tronxy/process/0.20mm Standard @Tronxy.json
# resources/profiles/Tronxy/process/0.24mm Draft @Tronxy.json
# resources/profiles/Voron.json
# resources/profiles/Voron/filament/Generic ABS @Voron.json
# resources/profiles/Voron/filament/Generic ASA @Voron.json
# resources/profiles/Voron/filament/Generic PA @Voron.json
# resources/profiles/Voron/filament/Generic PETG @Voron.json
# resources/profiles/Voron/filament/Generic PVA @Voron.json
# resources/profiles/Voron/filament/Voron Generic PA-CF.json
# resources/profiles/Voron/filament/Voron Generic PC.json
# resources/profiles/Voron/filament/Voron Generic PLA-CF.json
# resources/profiles/Voron/filament/Voron Generic PLA.json
# resources/profiles/Voron/filament/Voron Generic TPU.json
# resources/profiles/Voron/machine/Voron 0.1.json
# resources/profiles/Voron/machine/Voron 2.4 250.json
# resources/profiles/Voron/machine/Voron 2.4 300.json
# resources/profiles/Voron/machine/Voron 2.4 350.json
# resources/profiles/Voron/machine/Voron Trident 250.json
# resources/profiles/Voron/machine/Voron Trident 300.json
# resources/profiles/Voron/machine/Voron Trident 350.json
# resources/profiles/Voron/process/fdm_process_voron_common.json
# resources/profiles/Voxelab.json
# resources/profiles/Voxelab/filament/Generic ABS @Voxelab.json
# resources/profiles/Voxelab/filament/Generic PLA @Voxelab.json
# resources/profiles/Voxelab/filament/fdm_filament_common.json
# resources/profiles/Voxelab/machine/Voxelab Aquila X2 0.4 nozzle.json
# resources/profiles/Voxelab/machine/Voxelab Aquila X2.json
# resources/profiles/Voxelab/machine/fdm_machine_common.json
# resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json
# resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json
# resources/web/data/text.js
# resources/web/guide/21/21.js
# resources/web/guide/24/24.js
# src/BaseException.cpp
# src/OrcaSlicer.cpp
# src/libslic3r/AppConfig.cpp
# src/libslic3r/BoundingBox.hpp
# src/libslic3r/Extruder.hpp
# src/libslic3r/Fill/Fill.cpp
# src/libslic3r/Format/bbs_3mf.cpp
# src/libslic3r/GCode.cpp
# src/libslic3r/GCode.hpp
# src/libslic3r/GCode/CoolingBuffer.cpp
# src/libslic3r/GCode/GCodeProcessor.cpp
# src/libslic3r/GCode/GCodeProcessor.hpp
# src/libslic3r/GCode/WipeTower.cpp
# src/libslic3r/GCodeWriter.cpp
# src/libslic3r/GCodeWriter.hpp
# src/libslic3r/Model.cpp
# src/libslic3r/PerimeterGenerator.cpp
# src/libslic3r/Preset.cpp
# src/libslic3r/Preset.hpp
# src/libslic3r/PresetBundle.cpp
# src/libslic3r/PresetBundle.hpp
# src/libslic3r/Print.cpp
# src/libslic3r/Print.hpp
# src/libslic3r/PrintBase.hpp
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/PrintConfig.hpp
# src/libslic3r/PrintObject.cpp
# src/libslic3r/TreeSupport.cpp
# src/libslic3r/Utils.hpp
# src/mcut/CMakeLists.txt
# src/slic3r/CMakeLists.txt
# src/slic3r/GUI/3DBed.cpp
# src/slic3r/GUI/AMSMaterialsSetting.cpp
# src/slic3r/GUI/AMSMaterialsSetting.hpp
# src/slic3r/GUI/BBLTopbar.cpp
# src/slic3r/GUI/BBLTopbar.hpp
# src/slic3r/GUI/BackgroundSlicingProcess.hpp
# src/slic3r/GUI/BindDialog.cpp
# src/slic3r/GUI/ConfigManipulation.cpp
# src/slic3r/GUI/DeviceManager.cpp
# src/slic3r/GUI/Field.cpp
# src/slic3r/GUI/GLCanvas3D.cpp
# src/slic3r/GUI/GUI_App.cpp
# src/slic3r/GUI/GUI_App.hpp
# src/slic3r/GUI/GUI_Factories.cpp
# src/slic3r/GUI/GUI_Factories.hpp
# src/slic3r/GUI/GUI_ObjectList.cpp
# src/slic3r/GUI/Gizmos/GLGizmoMeshBoolean.cpp
# src/slic3r/GUI/Jobs/ArrangeJob.cpp
# src/slic3r/GUI/Jobs/FillBedJob.cpp
# src/slic3r/GUI/MainFrame.cpp
# src/slic3r/GUI/MediaPlayCtrl.cpp
# src/slic3r/GUI/Monitor.cpp
# src/slic3r/GUI/PartPlate.cpp
# src/slic3r/GUI/PartPlate.hpp
# src/slic3r/GUI/PlateSettingsDialog.cpp
# src/slic3r/GUI/PlateSettingsDialog.hpp
# src/slic3r/GUI/Plater.cpp
# src/slic3r/GUI/Plater.hpp
# src/slic3r/GUI/PresetComboBoxes.cpp
# src/slic3r/GUI/ReleaseNote.cpp
# src/slic3r/GUI/SelectMachine.cpp
# src/slic3r/GUI/StatusPanel.cpp
# src/slic3r/GUI/Tab.cpp
# src/slic3r/GUI/Widgets/Label.cpp
# src/slic3r/GUI/Widgets/Label.hpp
# src/slic3r/GUI/Widgets/SideButton.cpp
# src/slic3r/GUI/calib_dlg.cpp
# src/slic3r/GUI/calib_dlg.hpp
# src/slic3r/GUI/wxExtensions.hpp
# src/slic3r/Utils/NetworkAgent.cpp
# src/slic3r/Utils/bambu_networking.hpp
# version.inc
2023-08-26 16:13:57 +08:00
SoftFever
ab9873ff55
ENH: switch ironing_type to no ironing
...
This modification is based on Orca's commits 61db1ef36961db1ef369a1bc4b3a57
2023-08-15 21:39:51 +08:00
SoftFever
61db1ef369
misc profile fixes
2023-08-11 21:13:53 +08:00
xun.zhang
a39c2018d4
ENH: optimize some params for third-party printer
...
Thanks for Orca's efforts to improve third-party profiles.
This modification is based on Orca's commits afdd753db7aaefc400e1afdd753db7aaefc400e1#1641
2. Revamp Qidi X3 printer profiles
3. Turn on accel_to_decel_enable for klipper machine by default
4. Many other profiles tweaks
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I7c3ffaec5b06df61eb44b1c565bcb4a6c8de89ea
2023-08-04 18:28:42 +08:00
SoftFever
aaefc400e1
Tweak profiles
...
1. Fix Voron Trident printable height issue #1641
2. Revamp Qidi X3 printer profiles
3. Turn on accel_to_decel_enable for klipper machine by default
4. Many other profiles tweaks
2023-07-31 19:52:56 +08:00
xun.zhang
12eec78d1d
ENH: add profiles for creality CR6
...
Thanks bhast2 ,these profiles are based on his original version.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I23dbb7d8b80b8fc37ecd76c44bf1c547413bc434
(cherry picked from commit 4a58cee3ff08fcd5f542a7779f3a1dfad46a4509)
2023-07-31 14:29:15 +08:00
salt.wei
f84d38bea1
ENH: add more creatity printer
...
Thanks OrcaSlicer. Also fix wrong
setting id in orca profile
Add one py file to check whether has duplicated setting_id
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8461a1ae754253d8265ae5239fe91cc7ec775564
2023-07-07 17:29:08 +08:00
fr3ak2402
a14943665b
Revise and add new Creality profiles & Fix SecKit Filaments ( #974 )
...
* Revise and add new Creality profiles
* Correction of SecKit filaments
* Add Creality Ender-3 S1 Pro Profile & change snapmaker printer images
* Revision of the printer Creality & SecKit Printer ID
2023-05-07 22:50:18 +08:00
SoftFever
ac73fd702f
Merge pull request #839 from TonyK54/Ender5Pro-Profile
...
Adding Ender 5 Pro
2023-04-26 20:09:25 +08:00
SoftFever
260156648d
Merge branch 'master-remote' into SoftFever
...
# Conflicts:
# bbl/i18n/BambuStudio.pot
# bbl/i18n/de/BambuStudio_de.po
# bbl/i18n/en/BambuStudio_en.po
# bbl/i18n/es/BambuStudio_es.po
# bbl/i18n/fr/BambuStudio_fr.po
# bbl/i18n/hu/BambuStudio_hu.po
# bbl/i18n/nl/BambuStudio_nl.po
# bbl/i18n/sv/BambuStudio_sv.po
# bbl/i18n/zh_cn/BambuStudio_zh_CN.po
# resources/i18n/de/BambuStudio.mo
# resources/i18n/en/BambuStudio.mo
# resources/i18n/es/BambuStudio.mo
# resources/i18n/fr/BambuStudio.mo
# resources/i18n/hu/BambuStudio.mo
# resources/i18n/nl/BambuStudio.mo
# resources/i18n/sv/BambuStudio.mo
# resources/i18n/zh_cn/BambuStudio.mo
# resources/profiles/BBL.json
# resources/profiles/Creality.json
# resources/profiles/Voron.json
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/TreeSupport.cpp
# src/slic3r/GUI/DeviceManager.cpp
# src/slic3r/GUI/ReleaseNote.cpp
# version.inc
2022-12-31 15:15:58 +08:00
SoftFever
45b40fd380
add Creality CR-10 Max
...
#46
2022-12-30 16:54:10 +08:00
SoftFever
8d482eddd3
fix profile syncing issue
...
#74
2022-12-30 15:45:15 +08:00
Arthur
29dbc77e91
NEW: add new tree support style "Tree Slim"
...
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
tree slim is selected.
7. Use physical distance to calc radius
Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
2022-12-26 05:31:54 -05:00
SoftFever
57b4f3cf68
change default wall loop to 3
...
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
2022-12-20 11:32:54 +08:00
Arthur
8cfee69015
FIX: undef SUPPORT_TREE_DEBUG_TO_SVG and tree support enhance
...
1. undef SUPPORT_TREE_DEBUG_TO_SVG
2. change default tree branch angle to 45 degrees
3. encourage tree neighbors merge faster
4. draw more loops at the top of trees for stronger support
Change-Id: I2edf6a2dddb3b6165c2519ee15e9a7ffaba9de94
(cherry picked from commit 3a9723b2e88a033b3298cd68daf9400265e984a1)
2022-12-15 04:38:15 -05:00
Arthur
fd3dee6a6d
FIX: remove tree_support_with_infill in 3rd party profiles
...
Change-Id: Ie42a45b90ce14bc27308d66474db074e8bf380da
2022-12-15 04:38:15 -05:00
salt.wei
d47d82bf43
ENH: add preset for ender3 printer
...
As title.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I2d9b1aaeadfe945a6a90f34cdb10a1f240a50ae4
(cherry picked from commit a223ab23605c3ef96ae878b9c4d2199520b4f201)
2022-10-20 19:34:37 +08:00
