orcaslicer

amd/orcaslicer

Fork 0

Commit graph

Author	SHA1	Message	Date
Patrick Uven	719f09e2f2	Provide reasonable default layer heights (#7384 ) Using my Ender 3 V3 SE I noticed weird printing behaviour. Searching for the cause, I found that the default layer height for a 0.2mm nozzle for the printer was set to 0.08mm min and 0.32mm max, which are the default 20%/80% values for a 0.4mm nozzle. This commit changes the values for all Creality printer which had not a reasonable default value for 0.2mm, 0.6mm and 0.8mm nozzles to 20% min and 80% max. Co-authored-by: SoftFever <softfeverever@gmail.com>	2024-12-01 21:18:31 +08:00
Thomas	d3c9e4d099	Creality K1 series improvements (#5081 ) * Improved some configurations for K1 printers * Removed seam_slope_min_length for K1 * Increased wipe distance * Enabled slope on entire wall * Removed retract_before_wipe * Improved overhang print speed * Prettified JSON * Prettified machines JSON	2024-04-22 20:02:55 +08:00
Thomas	48541be681	Creality K1 Profiles improvements (and K1C addition) (#3728 ) * Added K1C and fixed some settings (took from config files instead of Creality Print) * Files renaming * New PLA-CF, prettify json for K1C, naming uniformisation, ... * Port Special PLA profiles to K1/K1 Max * Changed slow down layer time and slow down min speed in order to improve overall speed on details. * Raised PLA bed temp to 55°C * Optimisations for ABS, ASA and added Generic PC profile. * Added PA-CF and fixed PC profiles. * Added new filaments to default materials	2024-01-24 14:19:36 +00:00

Author

SHA1

Message

Date

Patrick Uven

719f09e2f2

Provide reasonable default layer heights (#7384 )

Using my Ender 3 V3 SE I noticed weird printing behaviour. Searching for
the cause, I found that the default layer height for a 0.2mm nozzle for
the printer was set to 0.08mm min and 0.32mm max, which are the default
20%/80% values for a 0.4mm nozzle. This commit changes the values for
all Creality printer which had not a reasonable default value for 0.2mm,
0.6mm and 0.8mm nozzles to 20% min and 80% max.

Co-authored-by: SoftFever <softfeverever@gmail.com>

2024-12-01 21:18:31 +08:00

Thomas

d3c9e4d099

Creality K1 series improvements (#5081 )

* Improved some configurations for K1 printers

* Removed seam_slope_min_length for K1

* Increased wipe distance

* Enabled slope on entire wall

* Removed retract_before_wipe

* Improved overhang print speed

* Prettified JSON

* Prettified machines JSON

2024-04-22 20:02:55 +08:00

Thomas

48541be681

Creality K1 Profiles improvements (and K1C addition) (#3728 )

* Added K1C and fixed some settings (took from config files instead of Creality Print)

* Files renaming

* New PLA-CF, prettify json for K1C, naming uniformisation, ...

* Port Special PLA profiles to K1/K1 Max

* Changed slow down layer time and slow down min speed in order to improve overall speed on details.

* Raised PLA bed temp to 55°C

* Optimisations for ABS, ASA and added Generic PC profile.

* Added PA-CF and fixed PC profiles.

* Added new filaments to default materials

2024-01-24 14:19:36 +00:00

3 commits