Modify the motor beep G-code to support changing the volume for each beat
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
(cherry picked from commit 5dac263e17a39d5ab0a432cf6e2a04ee6bb74f22)
Change-Id: I0aabba8cf7d0d9db1d84a9151b7659d045d790ca
Also fix a bug in default print profiles
Change-Id: I515e8762870968acce8fe17bdf33c7d380b3c29b
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
(cherry picked from commit 33c0a597c8b5390790772da06d880f6c03259817)
Reduce the wiping speed of the mouth.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I23bda42affc173a4d88ccfb1f4b79943d0bbecdc
(cherry picked from commit 12971f00f8918ce30634ef7467753fde0a562d82)
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id14f3d91171b81239b336ef879061c6de7d68edf
As title. Also modify temperature_vitrification for PA-CF
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8bc577267652be294ebe01f015b0502070c68dbe
1. use extruder_clearance_max_radius instead
2. set the value of P1P/P1S to the same value of X1C
JIRA: STUDIO-4214
Change-Id: I1ae5e4203db0933854b4388b5505dbf34b40edae
(cherry picked from commit 19cb6a0fbad0192d39813e449baed090baa163c5)
Remember C10 is for traditional timelapse, C11 is smooth timelapse.
The mother profile of all machines should be right.
Change-Id: Ia941f743d2a81ef4b5b4fa08a37ca654eb86d0d7
1. It seems there are a lot of buffered frames in IP CAM. Have to
wait enough time untill all buffers are flushed.
2. From watermellon's suggestion, increase travel speed duing layer
change, to save time and reduce oozing.
JIRA: STUDIO-2167
Change-Id: Ia2ec0bde216e90207897c00c395f7e02ea2fe342
(cherry picked from commit 9c85a7c68617b1628e1698912da20f1ebc69ec16)
It's not necessary to pause before photo-shooting, but after it.
Pausng by 50ms should be enough.
Jira: STUDIO-2167
Change-Id: I88ba5db1d6cce390ae5e26ac03533b0ee277b5bd
(cherry picked from commit ae34c0b9e875d1e52798a5359b0cce2151942fb8)
move to the middle upper edge of plate and ratract after calibrating to avoid leakage
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Idb09aaafee3bfccfd7c14d1140778498195b98c3
JIRA: [STUDIO-2226]
0.4mm nozzle contains different layer heights but has
the same preset threshold angle (30 degree) which is not reasonable.
Hereby, five of them are adjusted based on the overlap ratio.
Change-Id: I96300bf202c3a5fc4428186875a9212c32524ff2
fix the text errot of density of PolyTerra
z_hop_type change to auto
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I7f59d2620b42d2f2092ebb4c01ac3a5455c40a4f
1 extrude move to dustbin
2 max vol of TPU 95A of X1 to 3.6
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0b9d2a1db9c57c58255f95aad8a77772317a3ec9
Start gcode of P1P is wrong.
This is for github issue #1044
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id078b7c9020ef773373c3486f74dc51385b9dcc0
1. add gcode command for void printing detection
2. fix the issue that the toolhead is not at excess chute position when
smooth timelapse ends, by adding 2s pause after M991 command.
Jira: STUDIO-1996
Change-Id: I40cf16116e742744cea9bd90969e556a9ea2b2f1
(cherry picked from commit 2fbf7ffe6b1bd8850a76e229ff91750c689721b9)
auto select grid infill for tree hybrid, and set default wall count to
1.
Change-Id: Icbecd540d06f353da2e63533f8f7cf7d7f20fbdb
(cherry picked from commit 246335cc195c88a4101dddd1eeda42d9ca16589f)
1. In auto arranging bed temp can be higher than vitrify temp by no more than 15 degrees.
2. In by-object printing we use max radius for clearance
3. Add P1P max radius
Change-Id: If595f3e19fd74f6f36d2f394edbb835c413cc800
(cherry picked from commit 2af42420ad3770f0728adb583082600544519a58)
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
tree slim is selected.
7. Use physical distance to calc radius
Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
Bambu pa-cf has been modified, generic pa-cf
should be changed as well
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie859b41bd4d138a5fab204d6ad6a79806c3f0a9b
1. undef SUPPORT_TREE_DEBUG_TO_SVG
2. change default tree branch angle to 45 degrees
3. encourage tree neighbors merge faster
4. draw more loops at the top of trees for stronger support
Change-Id: I2edf6a2dddb3b6165c2519ee15e9a7ffaba9de94
(cherry picked from commit 3a9723b2e88a033b3298cd68daf9400265e984a1)
1 Use 25% infill density. 60% is too high and useless
2 update filament change gcode
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9a1fbbfb56b61723aa6e9d6bc44a22f467d92562
1. add default support base pattern (lightning for tree support,
rectilinear for normal)
2. change default support interface pattern to "Default" (concentric for
absoluble material, rectilinear for others)
3. delete tree_support_with_infill, replace no-infill optio with "None" infill type
4. delete HAS_LIGHTNING_INFILL macro (lightning is impossible to be
removed now)
5. fix the issue that tree support base may grow above interface by
adding virtual nodes (distance_to_top<0).
Change-Id: I5affa44e1f72d0dc54052927f2b315de83702870
(cherry picked from commit a2b41b1dfd9227e68ac6d971312133ec3382baa7)
Open the "Support xy expansion distance" setting for users who can set
expanding and shrinking distance along xy to change normal supports' overhang area.
Jira: STUDIO-1297
Change-Id: If3a1efe99acaced12216966a6f8abd0dc3734757
(cherry picked from commit c1fd588a181b17403109b64a0019818f428252da)
