This patch can make sure that the cooling fan will not
be enabled during change fimanet.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9f480b99116d62fe7522233b69b5bca209663821
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed
either of it be zero means use other printers
or user want to print it anyway
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
Towline may be even lower than the upper rod. Let's
take away 10mm tolerance.
Change-Id: I13972fc4ecb0671e1af4b2c6d102e319417e532f
(cherry picked from commit cedcb862556c8c9014a91ef2aad8f39fc118d925)
1. use strict ordering to ensure the printing order is right
2. reduce height-to-lid to 100mm considering towline is lower than lid
and may collid with objects
TODO: printing brim may still collide, need to subtract inflated boundary of
others during brim generation
Change-Id: Icf0cba10c579d28fabd97764c1b3abec267ebd9b
(cherry picked from commit 46c6f5ff94488b2f4481bf1d34555f4a7c45e135)
1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
This is change requirement from printer developer
for github issue #393
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ief306d89dba70d8515050cbd842edc4e1d22822e
filament_max_volumetric may be 0 which cause zero
flushing speed. Add protection for this issue.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I866b9d97c9c6d97122a4a2beaf508ce9c72ee3b2
Add M400 to avoid temperature switched before flush end.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I118bb240357e5c820c15e46ae34efa62248fdacc
The extruder offset of X1 and X1C is (0,2).
All generated gcode should minus this value.
Also change the min speed of cooling buffer for
better cooling for small area(from pineapple)
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I06e58a26f8736ae24fa9da02477a9d19114daeca
Filament type of Bambu PA-CF in RFID is PA-CF.
Change it to PA-CF as well in preset to avoid
failure of AMS mapping.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic6b6269123d59863fea2b7d262a124468c95b8af
1. first formal version of macos
2. add the bambu networking plugin install logic
3. auto compute the wipe volume when filament change
4. add the logic of wiping into support
5. refine the GUI layout and icons, improve the gui apperance in lots of
small places
6. serveral improve to support
7. support AMS auto-mapping
8. disable lots of unstable features: such as params table, media file download, HMS
9. fix serveral kinds of bugs
10. update the document of building
11. ...
