Allow user to disable support independent layer height when prime tower closed.
Fix wrong WIKI link jumping.
JIRA: STUDIO-1685
JIRA: STUDIO-2308
Change-Id: I894fdd37b707c53e17fd4ad7d1518897f307e557
(cherry picked from commit e10d31e123306a0893087ea03693303768a2daf6)
If a travel path goes through an overhang expolygons, and their distance
is shorter than threshold, lift type will be set to SpiralLift.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I345788711755dd8611ecf385818e6052cd8abe9e
Refer to prusa and enable arachne for wall.
Arachne also has corner case and cause strange
slicing result and bad quality when print, while
class engine is much better for these cases.
Provide option for user to choose.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ieb3a1c6a457ca610561f8734de4a122d74165afd
1. add default support base pattern (lightning for tree support,
rectilinear for normal)
2. change default support interface pattern to "Default" (concentric for
absoluble material, rectilinear for others)
3. delete tree_support_with_infill, replace no-infill optio with "None" infill type
4. delete HAS_LIGHTNING_INFILL macro (lightning is impossible to be
removed now)
5. fix the issue that tree support base may grow above interface by
adding virtual nodes (distance_to_top<0).
Change-Id: I5affa44e1f72d0dc54052927f2b315de83702870
(cherry picked from commit a2b41b1dfd9227e68ac6d971312133ec3382baa7)
Open the "Support xy expansion distance" setting for users who can set
expanding and shrinking distance along xy to change normal supports' overhang area.
Jira: STUDIO-1297
Change-Id: If3a1efe99acaced12216966a6f8abd0dc3734757
(cherry picked from commit c1fd588a181b17403109b64a0019818f428252da)
Users can set distance between support bottom contacts and object
once enable normal/tree support.
Jira: STUDIO-1383
TODO：Func seems good though, some details (e.g., bottom_interface
detection) need to be optimized furthur. Will keep follow-up.
Change-Id: I85815e7aa6cf1a5d0249633cd8ab995873461e8a
(cherry picked from commit eab39e89c94d749ebe6266ab745cbb70a068277d)
Add loop inside sparse infill of lower layer
to provide archor for internal bridge.
This option controls how many lower layers generate
loop path.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifdb6db9090115732aa2cacf5d155b587a10e18fc
(cherry picked from commit 4fdb87ecd5c2e680f6bad2d018ba39cd05f787ce)
Add back even-odd mode to support slicing 3DLabPrint
airplane models
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id3efcfb0ecf98350add7a19885750df74d4fdedd
(cherry picked from commit 553371e61e35355b3a73694d4cf9acb179b2a427)
See the new requirement of the latest update at
github issue #317
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68c9922a272b1d426126a531bfdee7a4f7e53620
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed
either of it be zero means use other printers
or user want to print it anyway
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
In some complicated cases or irregular shape, the direction
of external bridge is not good when calculated automaticlly.
So user may use modifier to change bridge direction.
This is handling for github issue #340
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3baf313f47925fa7e6aa087f5896b0af560f902d
So we can set lower acceleration for outer wall now.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib4728bf16f6c540afca62f423c8aab4c9e0c4d02
Change-Id: I48f34039635803c3f1cee4cc2c853a0ffa5b451a
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 387ba2a5aac05d3b3af0923f88415188ae8cb44e)
Signed-off-by: Stone Li <stone.li@bambulab.com>
1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
Add custom gcode back, which can be inserted in
gcode viewer layer slider.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I270cc438bedf11b30f07f8f9bad6ae5436d5a2dd
Thanks SoftForever for your works to support
sending a gcode file to third-party printer
Change-Id: I3cba43c8bd878f1f1c2fd5fae202ed4d922e8727
Signed-off-by: Stone Li <stone.li@bambulab.com>
When this option enabled, only generate supports for sharp tail, cantilever,
thin pillar (not well supported). So holes are safe from unnessary supports.
Currently only works for tree supports, will need to copied to normal
supports if it works fine.
Change-Id: I5eb86484a5b503149e3bfdee8ce73f76a0a849e4
1. first formal version of macos
2. add the bambu networking plugin install logic
3. auto compute the wipe volume when filament change
4. add the logic of wiping into support
5. refine the GUI layout and icons, improve the gui apperance in lots of
small places
6. serveral improve to support
7. support AMS auto-mapping
8. disable lots of unstable features: such as params table, media file download, HMS
9. fix serveral kinds of bugs
10. update the document of building
11. ...
