cochcoder
e14428897e
Initial add of CR-M4
2024-10-06 15:21:22 -04:00
cochcoder
201d188ef1
Revert "Trying something"
...
This reverts commit 08800dc9e3
2024-10-03 23:13:05 -04:00
cochcoder
08800dc9e3
Trying something
2024-10-03 22:20:17 -04:00
cochcoder
cac3d396c7
Initial Add of K2 Plus
...
*Some max speeds/accelerations changes for the 0.4 nozzle was left out as none of the other nozzles had these max speeds/accelerations
2024-10-03 19:51:04 -04:00
cochcoder
cffa0033cb
Initial add of K1 SE
2024-10-02 18:57:45 -04:00
Thomas
b1bd30fd5e
Ender 3 V3 Plus profile ( #5447 )
2024-05-25 08:32:23 +08:00
Stevetm2
193062570e
Creality Sermoon V1 - added generic filaments and machine settings ( #5301 )
...
* Add Sermoon V1 to Creality Generic PLA.json
* Add Sermoon V1 to Creality Generic ABS.json
* Add Sermoon V1 to Creality Generic PETG.json
* Add Sermoon V1 to Creality Generic TPU.json
* Add Generic TPU to Creality Sermoon V1.json
* Update Creality Sermoon V1 0.4 nozzle.json
Update nozzle_type and small 64x64 thumbnail size in Creality Sermoon V1 0.4 nozzle.json
* Set initial extruder_clearance values Creality Sermoon V1 0.4 nozzle.json
2024-05-09 23:23:39 +08:00
Thomas
e95afd7182
Ender 3 V3 initial commit ( #5127 )
...
* Ender 3 V3 initial commit
* Fixed bad naming
2024-04-29 23:51:53 +08:00
Thomas
d3c9e4d099
Creality K1 series improvements ( #5081 )
...
* Improved some configurations for K1 printers
* Removed seam_slope_min_length for K1
* Increased wipe distance
* Enabled slope on entire wall
* Removed retract_before_wipe
* Improved overhang print speed
* Prettified JSON
* Prettified machines JSON
2024-04-22 20:02:55 +08:00
cochcoder
7910e2aecc
Add Creality Ender-3 S1 Plus ( #4674 )
...
* Add Creality Ender-3 S1 Plus
* Misc
* Fix nozzle_diameter
* Add printer_variant value
* Change build plate model/texture to use Ender-3 V3 SE
* Enable mesh leveling
* Up max travel acceleration to 5000
* Enable infill_combination
* Add Draft profiles
* Change buildplate model/texture
* Fix build plate model
* Add retraction & detraction speed & change retraction length
* Add filament_ to the beginning
* Revert retraction & detraction speed & retraction length
* Tests
Trying to change retract and detract speed as well as retraction length
Also trying to have Z-hop only happen on top layers
* Apply new values to other nozzles
* disable z_hop
* Lower build plate model
* Resolve merge conflicts
* temporarily remove Ender-3 S1 Plus
* Re-add Ender-3 S1 Plus
2024-03-29 18:14:56 +08:00
cochcoder
64d0c324c1
Add Creality CR-10 SE ( #4757 )
...
* Add CR-10 SE and standard profiles
* Misc
Add more perimeters to CR-10 SE profiles
Add printer to filament profiles
Link everything in Creality.json
* Fix two bugs
* Forgot this
2024-03-29 17:57:01 +08:00
cochcoder
a2d24cd67f
Add Ender-3 V3 SE .2, .6, .8 and fix small Ender-3 Pro bug ( #4653 )
...
* Add Ender-3 V3 SE .2, .6, .8 and fix small Ender-3 Pro bug
* Forgot to remove these
* Fix error
* Remove these...
* Why did I delete this?
* Revert deletion
* Add missing profiles
* Create 0.24mm Draft @Creality Ender3V3KE.json
* Apply new nozzle sizes to generic filament
* Maybe this will do it
* Revert 0.4 renames & add to Generic ABS
* Add M420 S1; Enable mesh leveling
* Fix wring nozzle_diameter
* Potentially fix the issue of printer not being added after selected
2024-03-27 22:55:49 +08:00
Thomas
9e3cb4b1c5
Raised bed temperatures for Ender 3 V3 PLA profile ( #4636 )
2024-03-22 19:30:57 +08:00
cochcoder
98e1291c17
Fix Ender-3 Pro missing from Generic Creality filaments ( #4630 )
...
Fix Ender-3 Pro missing from generic filaments
2024-03-22 19:27:35 +08:00
Thomas
6fd5c2cbf3
Fix for missing K1 references ( #4600 )
...
Fix for fix wrong filaments appreared in other manufacture
2024-03-20 23:24:54 +08:00
SoftFever
8801c50aa0
Fix wrong filaments appreared in other manufacture
2024-03-19 21:46:06 +08:00
Thomas
eb345650a5
Fixed Ender 3 profile inheritance ( #4089 )
...
Fixed 4087
2024-02-14 21:34:19 +08:00
goyetus
31d1d03578
Creality Ender 3 and Prusa Mk3s 0,2;0,4,06 and 0,8 profiles ( #4029 )
...
* Ender 3 - All nozzles and Quality Profiles
Ender 3 Profiles.
0.20 Nozzle
0.40 Nozzle
0.60 Nozzle
0.80 Nozzle
0.12 to 0.24 Quality Profiles for every Nozzle in Process Folder
* all
all
* Ender 3 Profiles
Ender 3 Profiles for: 0,2;0,4;0,6;0,8
5 Different and independent Quality profiles for each Nozzle.
Fine, Optimal, Standard, Draft and Superdraft
* aa
aa
* aa
aa
* aa
aa
* Prusa Mk3s Profiles
Prusa Mk3s Profiles
* Mk3s FIXED
mk3s FIXED
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
2024-02-11 10:25:18 +08:00
Thomas
48541be681
Creality K1 Profiles improvements (and K1C addition) ( #3728 )
...
* Added K1C and fixed some settings (took from config files instead of Creality Print)
* Files renaming
* New PLA-CF, prettify json for K1C, naming uniformisation, ...
* Port Special PLA profiles to K1/K1 Max
* Changed slow down layer time and slow down min speed in order to improve overall speed on details.
* Raised PLA bed temp to 55°C
* Optimisations for ABS, ASA and added Generic PC profile.
* Added PA-CF and fixed PC profiles.
* Added new filaments to default materials
2024-01-24 14:19:36 +00:00
Thomas
ff291a4ab8
New generic profile for Ender 3 V2 Neo ( #3434 )
...
* Added generic profile for Ender 3 V2 Neo
* Disable skirt, because a purge line is drawn
* Added printer_structure
2024-01-14 23:07:35 +08:00
Thomas
f5cbe6a38b
New profile for Creality Ender 3 V3 KE ( #3216 )
...
* Added Creality Ender 3 V3 SE.
* Fixed fine profile.
* Optimized first layer speed (based on Creality Print)
* Brought back Ender-5 (2019)
* Setting Marlin 2 as gcode flavor
* Added Ender 3 V3 KE Profile
* Use inheritance for Ender-3 V3 filament profiles.
* Various improvements.
* Temperature optimisations (less power consumption)
* Added Ender 3 V3 KE Profile
* Tweaks for KE integration.
* Fixed some log errors.
* Optimizations
* Optimizations.
* Reverted support_interface_top_layers
* Added correct jerk and acceleration settings.
* Added correct jerk and acceleration.
* Added retraction speed.
* Re-added missing Ender-5 references in filaments.
* Inherits processes from process_common_klipper
* Reverted code simplification for inherited profiles.
2023-12-21 08:51:18 +00:00
Thomas
888096d75c
New profile for Creality Ender 3 V3 SE ( #3180 )
...
* Added Creality Ender 3 V3 SE.
* Fixed fine profile.
* Optimized first layer speed (based on Creality Print)
* Brought back Ender-5 (2019)
* Setting Marlin 2 as gcode flavor
* Use inheritance for Ender-3 V3 filament profiles.
* Various improvements.
* Temperature optimisations (less power consumption)
* Fixed some log errors.
* Optimizations
* Reverted support_interface_top_layers
* Added correct jerk and acceleration settings.
* Added retraction speed.
* Re-added missing Ender-5 references in filaments.
* Reverted slow_down_layer_time, Creality print is too optimistic on this at least for Ender 3 V3 SE.
* Optimizations for supports (easier to remove)
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
2023-12-20 19:56:13 +08:00
Paul
0bf65aa217
Additional Nozzles for the Creality Ender-5 Pro (2019) ( #2964 )
...
* Add 0.6mm Nozzle Configurations for CE5Pro
* Add 0.5mm Nozzle Configurations for CE5Pro
* Add Nozzle Size Printer Variants 0.2-1.0mm
* Add 0.3mm Printer Variant
* Add 0.5mm Printer Variant
* Fix: 0.6mm Printer Variant
* Add Remaining Printer Variants
* Add CE5Pro Nozzles to list of Compatible Filament
* Add Generic FDM Process for Creality 0.3 Nozzle
* Update Generic FDM Process for Creality 0.6 Nozzle
* Add FDM Process for Remaining Creality Nozzle
* Add Processes For CE5Pro 0.8mm Nozzle
* Add Processes For CE5Pro 1.0mm Nozzle
* Add Processes For CE5Pro 0.2mm Nozzle
* Fix Initial Layer Settings
* Add Processes For CE5Pro 0.25mm Nozzle
* Add Processes For CE5Pro 0.3mm Nozzle
* Remove Profiles Outside their Min/Max Layer Height
* Update CE5Pro 0.4 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.2 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.25 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.3 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.5 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.6 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.8 Nozzle Naming Scheme to PR1100
* Update CE5Pro 1.0 Nozzle Naming Scheme to PR1100
* Incl. Remaining Base Config That Diff Is Based On
* Remove whitespace
* Revert from Nozzle Naming Scheme in PR1100
* Update Nozzle Names
* Revert "Incl. Remaining Base Config That Diff Is Based On"
This reverts commit 87e15d621b2d8e2d2677036285e2a4677125dcdf.
These settings were already captured by fdm_process_creality_common.json
* Fix Indentations
2023-12-03 12:02:03 +08:00
SoftFever
f899025363
Revert "Adding new nozzle profiles for the Creality Ender-5 Pro (2019) ( #2817 )"
...
This reverts commit eab8139d3c
2023-12-02 10:24:12 +08:00
Paul
eab8139d3c
Adding new nozzle profiles for the Creality Ender-5 Pro (2019) ( #2817 )
...
* Add 0.6mm Nozzle Configurations for CE5Pro
* Add 0.5mm Nozzle Configurations for CE5Pro
* Add Nozzle Size Printer Variants 0.2-1.0mm
* Add 0.3mm Printer Variant
* Add 0.5mm Printer Variant
* Fix: 0.6mm Printer Variant
* Add Remaining Printer Variants
* Add CE5Pro Nozzles to list of Compatible Filament
* Add Generic FDM Process for Creality 0.3 Nozzle
* Update Generic FDM Process for Creality 0.6 Nozzle
* Add FDM Process for Remaining Creality Nozzle
* Add Processes For CE5Pro 0.8mm Nozzle
* Add Processes For CE5Pro 1.0mm Nozzle
* Add Processes For CE5Pro 0.2mm Nozzle
* Fix Initial Layer Settings
* Add Processes For CE5Pro 0.25mm Nozzle
* Add Processes For CE5Pro 0.3mm Nozzle
* Remove Profiles Outside their Min/Max Layer Height
* Update CE5Pro 0.4 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.2 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.25 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.3 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.5 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.6 Nozzle Naming Scheme to PR1100
* Update CE5Pro 0.8 Nozzle Naming Scheme to PR1100
* Update CE5Pro 1.0 Nozzle Naming Scheme to PR1100
* Incl. Remaining Base Config That Diff Is Based On
* Remove whitespace
2023-11-29 22:32:58 +08:00
Thomas
2077c98bcc
K1/K1 Max : Added TPU, ASA and fixed filaments missing from previous PR ( #2412 )
...
* Rename Creality HF Generic Speed PLA.cfg to Creality HF Generic Speed PLA.json
* Update Creality K1.json
* Create Creality Generic TPU.json
* Update Creality Generic ASA.json
CS
* Update Creality.json
* Update Creality K1 Max.json
2023-10-14 20:16:16 +08:00
Thomas
25447877c6
Config changes for Creality K1/K1 Max ( #2380 )
...
* Update 0.16mm Optimal @Creality K1 (0.4 nozzle).json
Improved K1 0.16mm profile
* Improved 0.20mm Standard @Creality K1 (0.4 nozzle).json
* Improved 0.24mm Draft @Creality K1 (0.4 nozzle).json
* Create Creality High Flow Hotend PLA.json
* Create fdm_filament_tpu.json
* Create fdm_filament_asa.json
* Create Creality Generic ASA.json
* Update Creality Generic PLA.json
* Create Creality Generic Speed PLA.cfg
* Rename Creality High Flow Hotend PLA.json to Creality High Flow Hotend Generic PLA.json
* Rename Creality Generic Speed PLA.cfg to Creality High Flow Hotend Generic Speed PLA.cfg
* Update Creality Generic ASA.json
* Update Creality K1 (0.4 nozzle).json
* Update Creality K1 (0.6 nozzle).json
* Update Creality K1 (0.8 nozzle).json
* Update Creality Generic ASA.json
* Rename Creality High Flow Hotend Generic PLA.json to Creality HF Generic PLA.json
* Rename Creality High Flow Hotend Generic Speed PLA.cfg to Creality HF Generic Speed PLA.cfg
* Update Creality Generic PLA.json
* Update 0.24mm Draft @Creality K1 (0.4 nozzle).json
* Update Creality HF Generic PLA.json
* Update Creality HF Generic Speed PLA.cfg
2023-10-14 10:59:51 +08:00
Christophe Fonteyne
bd13d83385
Added profile for Creality CR-6 SE and CR-6 Max ( #2040 )
...
* Added profile for CReality CR-6 SE and CR-6 Max
* Removed merge conflict artifacts
* Removed duplicate process_list
* Fixed many bugs. Profile now loads correctly in 1.7.0-beta
* fixed filament dependencies for CR-6
2023-09-17 11:21:07 +08:00
RandomGgames
f2d5cce8cf
Add ender-3 printer ( #2053 )
...
* Add ender-3 printer option
* Added image and standard 0.2mm process
* Added Ender 3
* Removed a stray empty line
* fix e3
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
2023-09-14 20:55:33 +08:00
SoftFever
e7051b210b
fix profiles
...
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
2023-09-10 14:57:22 +08:00
Sadri ERCAN
11668bc506
Turkish Language update & New Printer Profiles ( #2016 )
...
* Turkish Language update with latest strings
Turkish Language update with latest strings
* New Printer Profiles Added
Creality K1-K1 Max
Elegoo Neptune 4 - Neptune Pro profiles added.
Adapted based on GalaxySlicer profile files.
GalaxySlicer Repo: https://github.com/fr3ak2402/GalaxySlicer
* Elegoo Neptune 4 Profile Files
Elegoo Neptune 4 Profile Files Update
2023-09-06 22:22:28 +08:00
SoftFever
2a478ab4f9
post changes after merging BS1.7.4
...
Remove tracking etc..
2023-08-26 18:45:43 +08:00
SoftFever
e65b11a831
Merge remote-tracking branch 'BS/v1.7.2'
...
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
# Conflicts:
# .github/ISSUE_TEMPLATE/bug_report.md
# .github/workflows/build_ubuntu.yml
# .gitignore
# Containerfile
# Dockerfile
# README.md
# deps/Boost/Boost.cmake
# deps/OpenEXR/OpenEXR.cmake
# deps/OpenVDB/OpenVDB.cmake
# doc/How to build - Mac OS.md
# localization/i18n/OrcaSlicer.pot
# localization/i18n/de/OrcaSlicer_de.po
# localization/i18n/en/OrcaSlicer_en.po
# localization/i18n/es/OrcaSlicer_es.po
# localization/i18n/fr/OrcaSlicer_fr.po
# localization/i18n/hu/OrcaSlicer_hu.po
# localization/i18n/it/OrcaSlicer_it.po
# localization/i18n/ja/OrcaSlicer_ja.po
# localization/i18n/list.txt
# localization/i18n/nl/OrcaSlicer_nl.po
# localization/i18n/sv/OrcaSlicer_sv.po
# localization/i18n/zh_cn/OrcaSlicer_zh_CN.po
# resources/i18n/de/BambuStudio.mo
# resources/i18n/en/BambuStudio.mo
# resources/i18n/es/BambuStudio.mo
# resources/i18n/fr/BambuStudio.mo
# resources/i18n/hu/BambuStudio.mo
# resources/i18n/it/BambuStudio.mo
# resources/i18n/ja/BambuStudio.mo
# resources/i18n/nl/BambuStudio.mo
# resources/i18n/sv/BambuStudio.mo
# resources/i18n/zh_cn/BambuStudio.mo
# resources/images/im_all_plates_stats.svg
# resources/profiles/Anker.json
# resources/profiles/Anker/filament/Generic ASA @Anker.json
# resources/profiles/Anker/filament/Generic PA @Anker.json
# resources/profiles/Anker/filament/Generic PA-CF @Anker.json
# resources/profiles/Anker/filament/Generic PC @Anker.json
# resources/profiles/Anker/filament/Generic PETG @Anker.json
# resources/profiles/Anker/filament/Generic PLA-CF @Anker.json
# resources/profiles/Anker/filament/Generic PVA @Anker.json
# resources/profiles/Anker/filament/Generic TPU @Anker.json
# resources/profiles/Anker/machine/Anker M5 0.4 nozzle.json
# resources/profiles/Anker/machine/Anker M5.json
# resources/profiles/Anker/machine/Anker M5C 0.4 nozzle.json
# resources/profiles/Anker/machine/Anker M5C.json
# resources/profiles/Anker/machine/fdm_machine_common.json
# resources/profiles/Anker/process/0.05mm Ultradetail @Anker.json
# resources/profiles/Anker/process/0.15mm Fast @Anker.json
# resources/profiles/Anker/process/0.20mm Fast @Anker.json
# resources/profiles/Anker/process/0.20mm Standard @Anker.json
# resources/profiles/Anker/process/0.25mm Fast @Anker.json
# resources/profiles/Anker/process/fdm_process_common.json
# resources/profiles/Anycubic.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 2 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 2.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro.json
# resources/profiles/Anycubic/machine/Anycubic Chiron 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Chiron.json
# resources/profiles/Anycubic/machine/Anycubic Kobra 2 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Kobra Max 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Kobra Max.json
# resources/profiles/Anycubic/machine/Anycubic Vyper 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Vyper.json
# resources/profiles/Anycubic/machine/Anycubic i3 Mega S 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic i3 Mega S.json
# resources/profiles/Anycubic/machine/fdm_machine_common.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json
# resources/profiles/Anycubic/process/fdm_process_common.json
# resources/profiles/BBL.json
# resources/profiles/BBL/process/fdm_process_bbl_common.json
# resources/profiles/Creality.json
# resources/profiles/Creality/filament/fdm_filament_abs.json
# resources/profiles/Creality/filament/fdm_filament_pla.json
# resources/profiles/Creality/machine/Creality CR-10 Max 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-10 Max.json
# resources/profiles/Creality/machine/Creality CR-10 V2 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-10 V2.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 Pro.json
# resources/profiles/Creality/machine/Creality Ender-3 S1.json
# resources/profiles/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 V2.json
# resources/profiles/Creality/machine/Creality Ender-5 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 Plus.json
# resources/profiles/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 S1.json
# resources/profiles/Creality/machine/Creality Ender-5.json
# resources/profiles/Creality/machine/Creality Ender-5S 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5S.json
# resources/profiles/Creality/machine/Creality Ender-6 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-6.json
# resources/profiles/Creality/machine/fdm_creality_common.json
# resources/profiles/Creality/machine/fdm_machine_common.json
# resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json
# resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json
# resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json
# resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json
# resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json
# resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json
# resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json
# resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json
# resources/profiles/Creality/process/0.24mm Draft @Creality.json
# resources/profiles/Creality/process/fdm_process_creality_common.json
# resources/profiles/Custom/filament/My Generic PETG.json
# resources/profiles/Custom/filament/My Generic PLA.json
# resources/profiles/Elegoo.json
# resources/profiles/Elegoo/filament/fdm_filament_common.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2D 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2D.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2S 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2S.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Max 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Max.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Plus 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Plus.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Pro 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Pro.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3.json
# resources/profiles/Elegoo/machine/Elegoo Neptune X 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune X.json
# resources/profiles/Elegoo/machine/Elegoo Neptune.json
# resources/profiles/Elegoo/machine/fdm_machine_common.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo NeptuneX.json
# resources/profiles/Prusa.json
# resources/profiles/Prusa/filament/fdm_filament_common.json
# resources/profiles/Prusa/machine/Prusa MINI 0.4 nozzle.json
# resources/profiles/Prusa/machine/Prusa MINI.json
# resources/profiles/Prusa/machine/Prusa MK3S 0.4 nozzle.json
# resources/profiles/Prusa/machine/Prusa MK3S.json
# resources/profiles/Prusa/machine/fdm_machine_common.json
# resources/profiles/Prusa/process/0.20mm Standard @MINI.json
# resources/profiles/Prusa/process/0.20mm Standard @MK3S.json
# resources/profiles/Qidi.json
# resources/profiles/Qidi/filament/fdm_filament_abs.json
# resources/profiles/Qidi/filament/fdm_filament_asa.json
# resources/profiles/Qidi/filament/fdm_filament_common.json
# resources/profiles/Qidi/filament/fdm_filament_pa.json
# resources/profiles/Qidi/filament/fdm_filament_pc.json
# resources/profiles/Qidi/filament/fdm_filament_pet.json
# resources/profiles/Qidi/filament/fdm_filament_pla.json
# resources/profiles/Qidi/filament/fdm_filament_pva.json
# resources/profiles/Qidi/filament/fdm_filament_tpu.json
# resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-CF Pro.json
# resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Max 3.json
# resources/profiles/Qidi/machine/Qidi X-Max.json
# resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Plus 3.json
# resources/profiles/Qidi/machine/Qidi X-Plus.json
# resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Smart 3.json
# resources/profiles/Qidi/machine/fdm_machine_common.json
# resources/profiles/Qidi/machine/fdm_qidi_common.json
# resources/profiles/Qidi/machine/fdm_qidi_x3_common.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json
# resources/profiles/Qidi/process/fdm_process_common.json
# resources/profiles/Qidi/process/fdm_process_qidi_common.json
# resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json
# resources/profiles/Tronxy/filament/Tronxy Generic ABS.json
# resources/profiles/Tronxy/process/0.12mm Fine @Tronxy.json
# resources/profiles/Tronxy/process/0.15mm Optimal @Tronxy.json
# resources/profiles/Tronxy/process/0.20mm Standard @Tronxy.json
# resources/profiles/Tronxy/process/0.24mm Draft @Tronxy.json
# resources/profiles/Voron.json
# resources/profiles/Voron/filament/Generic ABS @Voron.json
# resources/profiles/Voron/filament/Generic ASA @Voron.json
# resources/profiles/Voron/filament/Generic PA @Voron.json
# resources/profiles/Voron/filament/Generic PETG @Voron.json
# resources/profiles/Voron/filament/Generic PVA @Voron.json
# resources/profiles/Voron/filament/Voron Generic PA-CF.json
# resources/profiles/Voron/filament/Voron Generic PC.json
# resources/profiles/Voron/filament/Voron Generic PLA-CF.json
# resources/profiles/Voron/filament/Voron Generic PLA.json
# resources/profiles/Voron/filament/Voron Generic TPU.json
# resources/profiles/Voron/machine/Voron 0.1.json
# resources/profiles/Voron/machine/Voron 2.4 250.json
# resources/profiles/Voron/machine/Voron 2.4 300.json
# resources/profiles/Voron/machine/Voron 2.4 350.json
# resources/profiles/Voron/machine/Voron Trident 250.json
# resources/profiles/Voron/machine/Voron Trident 300.json
# resources/profiles/Voron/machine/Voron Trident 350.json
# resources/profiles/Voron/process/fdm_process_voron_common.json
# resources/profiles/Voxelab.json
# resources/profiles/Voxelab/filament/Generic ABS @Voxelab.json
# resources/profiles/Voxelab/filament/Generic PLA @Voxelab.json
# resources/profiles/Voxelab/filament/fdm_filament_common.json
# resources/profiles/Voxelab/machine/Voxelab Aquila X2 0.4 nozzle.json
# resources/profiles/Voxelab/machine/Voxelab Aquila X2.json
# resources/profiles/Voxelab/machine/fdm_machine_common.json
# resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json
# resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json
# resources/web/data/text.js
# resources/web/guide/21/21.js
# resources/web/guide/24/24.js
# src/BaseException.cpp
# src/OrcaSlicer.cpp
# src/libslic3r/AppConfig.cpp
# src/libslic3r/BoundingBox.hpp
# src/libslic3r/Extruder.hpp
# src/libslic3r/Fill/Fill.cpp
# src/libslic3r/Format/bbs_3mf.cpp
# src/libslic3r/GCode.cpp
# src/libslic3r/GCode.hpp
# src/libslic3r/GCode/CoolingBuffer.cpp
# src/libslic3r/GCode/GCodeProcessor.cpp
# src/libslic3r/GCode/GCodeProcessor.hpp
# src/libslic3r/GCode/WipeTower.cpp
# src/libslic3r/GCodeWriter.cpp
# src/libslic3r/GCodeWriter.hpp
# src/libslic3r/Model.cpp
# src/libslic3r/PerimeterGenerator.cpp
# src/libslic3r/Preset.cpp
# src/libslic3r/Preset.hpp
# src/libslic3r/PresetBundle.cpp
# src/libslic3r/PresetBundle.hpp
# src/libslic3r/Print.cpp
# src/libslic3r/Print.hpp
# src/libslic3r/PrintBase.hpp
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/PrintConfig.hpp
# src/libslic3r/PrintObject.cpp
# src/libslic3r/TreeSupport.cpp
# src/libslic3r/Utils.hpp
# src/mcut/CMakeLists.txt
# src/slic3r/CMakeLists.txt
# src/slic3r/GUI/3DBed.cpp
# src/slic3r/GUI/AMSMaterialsSetting.cpp
# src/slic3r/GUI/AMSMaterialsSetting.hpp
# src/slic3r/GUI/BBLTopbar.cpp
# src/slic3r/GUI/BBLTopbar.hpp
# src/slic3r/GUI/BackgroundSlicingProcess.hpp
# src/slic3r/GUI/BindDialog.cpp
# src/slic3r/GUI/ConfigManipulation.cpp
# src/slic3r/GUI/DeviceManager.cpp
# src/slic3r/GUI/Field.cpp
# src/slic3r/GUI/GLCanvas3D.cpp
# src/slic3r/GUI/GUI_App.cpp
# src/slic3r/GUI/GUI_App.hpp
# src/slic3r/GUI/GUI_Factories.cpp
# src/slic3r/GUI/GUI_Factories.hpp
# src/slic3r/GUI/GUI_ObjectList.cpp
# src/slic3r/GUI/Gizmos/GLGizmoMeshBoolean.cpp
# src/slic3r/GUI/Jobs/ArrangeJob.cpp
# src/slic3r/GUI/Jobs/FillBedJob.cpp
# src/slic3r/GUI/MainFrame.cpp
# src/slic3r/GUI/MediaPlayCtrl.cpp
# src/slic3r/GUI/Monitor.cpp
# src/slic3r/GUI/PartPlate.cpp
# src/slic3r/GUI/PartPlate.hpp
# src/slic3r/GUI/PlateSettingsDialog.cpp
# src/slic3r/GUI/PlateSettingsDialog.hpp
# src/slic3r/GUI/Plater.cpp
# src/slic3r/GUI/Plater.hpp
# src/slic3r/GUI/PresetComboBoxes.cpp
# src/slic3r/GUI/ReleaseNote.cpp
# src/slic3r/GUI/SelectMachine.cpp
# src/slic3r/GUI/StatusPanel.cpp
# src/slic3r/GUI/Tab.cpp
# src/slic3r/GUI/Widgets/Label.cpp
# src/slic3r/GUI/Widgets/Label.hpp
# src/slic3r/GUI/Widgets/SideButton.cpp
# src/slic3r/GUI/calib_dlg.cpp
# src/slic3r/GUI/calib_dlg.hpp
# src/slic3r/GUI/wxExtensions.hpp
# src/slic3r/Utils/NetworkAgent.cpp
# src/slic3r/Utils/bambu_networking.hpp
# version.inc
2023-08-26 16:13:57 +08:00
xun.zhang
12eec78d1d
ENH: add profiles for creality CR6
...
Thanks bhast2 ,these profiles are based on his original version.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I23dbb7d8b80b8fc37ecd76c44bf1c547413bc434
(cherry picked from commit 4a58cee3ff08fcd5f542a7779f3a1dfad46a4509)
2023-07-31 14:29:15 +08:00
xun.zhang
ee11ca6eeb
ENH: rename third-party printers' filaments
...
Change-Id: Ie6a52f5b91cba9be83c6160f64f5d7edd113c2e9
2023-07-07 17:29:08 +08:00
salt.wei
f84d38bea1
ENH: add more creatity printer
...
Thanks OrcaSlicer. Also fix wrong
setting id in orca profile
Add one py file to check whether has duplicated setting_id
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8461a1ae754253d8265ae5239fe91cc7ec775564
2023-07-07 17:29:08 +08:00
fr3ak2402
a14943665b
Revise and add new Creality profiles & Fix SecKit Filaments ( #974 )
...
* Revise and add new Creality profiles
* Correction of SecKit filaments
* Add Creality Ender-3 S1 Pro Profile & change snapmaker printer images
* Revision of the printer Creality & SecKit Printer ID
2023-05-07 22:50:18 +08:00
SoftFever
ac73fd702f
Merge pull request #839 from TonyK54/Ender5Pro-Profile
...
Adding Ender 5 Pro
2023-04-26 20:09:25 +08:00
SoftFever
da57260101
change default slow_down_min_speed to 10
2023-03-14 21:30:45 +08:00
SoftFever
5ef51f6c8a
Merge branch 'master-remote' into feature/1.5
...
Signed-off-by: SoftFever <softfeverever@gmail.com>
# Conflicts:
# bbl/i18n/BambuStudio.pot
# bbl/i18n/de/BambuStudio_de.po
# bbl/i18n/en/BambuStudio_en.po
# bbl/i18n/es/BambuStudio_es.po
# bbl/i18n/fr/BambuStudio_fr.po
# bbl/i18n/hu/BambuStudio_hu.po
# bbl/i18n/it/BambuStudio_it.po
# bbl/i18n/nl/BambuStudio_nl.po
# bbl/i18n/sv/BambuStudio_sv.po
# bbl/i18n/zh_cn/BambuStudio_zh_CN.po
# deps/Boost/Boost.cmake
# deps/wxWidgets/wxWidgets.cmake
# resources/config.json
# resources/i18n/de/BambuStudio.mo
# resources/i18n/en/BambuStudio.mo
# resources/i18n/es/BambuStudio.mo
# resources/i18n/fr/BambuStudio.mo
# resources/i18n/hu/BambuStudio.mo
# resources/i18n/it/BambuStudio.mo
# resources/i18n/nl/BambuStudio.mo
# resources/i18n/sv/BambuStudio.mo
# resources/i18n/zh_cn/BambuStudio.mo
# resources/images/tips_arrow.svg
# resources/profiles/Anycubic.json
# resources/profiles/Anycubic/filament/Anycubic Generic ABS.json
# resources/profiles/Anycubic/filament/Anycubic Generic ASA.json
# resources/profiles/Anycubic/filament/Anycubic Generic PA-CF.json
# resources/profiles/Anycubic/filament/Anycubic Generic PA.json
# resources/profiles/Anycubic/filament/Anycubic Generic PC.json
# resources/profiles/Anycubic/filament/Anycubic Generic PETG.json
# resources/profiles/Anycubic/filament/Anycubic Generic PLA-CF.json
# resources/profiles/Anycubic/filament/Anycubic Generic PLA.json
# resources/profiles/Anycubic/filament/Anycubic Generic PVA.json
# resources/profiles/Anycubic/filament/Anycubic Generic TPU.json
# resources/profiles/Anycubic/filament/fdm_filament_common.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro.json
# resources/profiles/Anycubic/process/0.20mm Standard @4MaxPro.json
# resources/profiles/Anycubic/process/fdm_process_common.json
# resources/profiles/BBL.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json
# resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json
# resources/profiles/Voron.json
# resources/web/data/text.js
# resources/web/image/printer/Anycubic 4Max Pro_cover.png
# src/BambuStudio.cpp
# src/libslic3r/GCode.cpp
# src/libslic3r/GCode.hpp
# src/libslic3r/GCode/GCodeProcessor.cpp
# src/libslic3r/GCodeWriter.hpp
# src/libslic3r/PerimeterGenerator.cpp
# src/libslic3r/PresetBundle.cpp
# src/libslic3r/Print.cpp
# src/libslic3r/Print.hpp
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/PrintConfig.hpp
# src/libslic3r/PrintObject.cpp
# src/slic3r/GUI/AMSMaterialsSetting.cpp
# src/slic3r/GUI/AMSMaterialsSetting.hpp
# src/slic3r/GUI/AmsMappingPopup.cpp
# src/slic3r/GUI/AmsMappingPopup.hpp
# src/slic3r/GUI/Auxiliary.cpp
# src/slic3r/GUI/BackgroundSlicingProcess.cpp
# src/slic3r/GUI/ConfigManipulation.cpp
# src/slic3r/GUI/DeviceManager.cpp
# src/slic3r/GUI/DeviceManager.hpp
# src/slic3r/GUI/ExtrusionCalibration.cpp
# src/slic3r/GUI/GCodeViewer.cpp
# src/slic3r/GUI/GCodeViewer.hpp
# src/slic3r/GUI/GUI_App.cpp
# src/slic3r/GUI/IMSlider.cpp
# src/slic3r/GUI/Jobs/PrintJob.cpp
# src/slic3r/GUI/Jobs/PrintJob.hpp
# src/slic3r/GUI/Jobs/SendJob.cpp
# src/slic3r/GUI/Jobs/SendJob.hpp
# src/slic3r/GUI/MainFrame.cpp
# src/slic3r/GUI/MainFrame.hpp
# src/slic3r/GUI/MediaPlayCtrl.cpp
# src/slic3r/GUI/OptionsGroup.cpp
# src/slic3r/GUI/PhysicalPrinterDialog.cpp
# src/slic3r/GUI/Plater.cpp
# src/slic3r/GUI/PrintHostDialogs.cpp
# src/slic3r/GUI/Printer/BambuTunnel.h
# src/slic3r/GUI/Printer/PrinterFileSystem.cpp
# src/slic3r/GUI/Printer/gstbambusrc.c
# src/slic3r/GUI/Printer/gstbambusrc.h
# src/slic3r/GUI/ReleaseNote.cpp
# src/slic3r/GUI/ReleaseNote.hpp
# src/slic3r/GUI/SelectMachine.cpp
# src/slic3r/GUI/SendToPrinter.cpp
# src/slic3r/GUI/SetBedTypeDialog.cpp
# src/slic3r/GUI/StatusPanel.cpp
# src/slic3r/GUI/StatusPanel.hpp
# src/slic3r/GUI/Tab.cpp
# src/slic3r/GUI/Widgets/AMSControl.cpp
# src/slic3r/GUI/Widgets/AMSControl.hpp
# src/slic3r/GUI/Widgets/ImageSwitchButton.cpp
# src/slic3r/GUI/Widgets/Label.cpp
# src/slic3r/GUI/WipeTowerDialog.cpp
# src/slic3r/Utils/Process.cpp
# src/slic3r/Utils/bambu_networking.hpp
# version.inc
2023-03-08 00:08:26 +08:00
chunmao.guo
cbb84d2fb6
ENH: support filament_z_hop_types
...
Support override z top type in filament
This is handling for STUDIO-2082
Change-Id: I885d1d5e44d626e28b260ff569d0359e462a5f8d
2023-02-22 20:09:17 +08:00
SoftFever
45b40fd380
add Creality CR-10 Max
...
#46
2022-12-30 16:54:10 +08:00
SoftFever
8d482eddd3
fix profile syncing issue
...
#74
2022-12-30 15:45:15 +08:00
salt.wei
d47d82bf43
ENH: add preset for ender3 printer
...
As title.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I2d9b1aaeadfe945a6a90f34cdb10a1f240a50ae4
(cherry picked from commit a223ab23605c3ef96ae878b9c4d2199520b4f201)
2022-10-20 19:34:37 +08:00
