Adjust the print acceleration from 10000 to 6000.
Retain only PLA-type filaments, including support types for PLA,PETG,TPU.
Delete all other high-temperature filament types.
jira: STUDIO-4038
Change-Id: Iba56bfe94aee0235a629b98a29cdcac323490e34
Modify the motor beep G-code to support changing the volume for each beat
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
(cherry picked from commit 5dac263e17a39d5ab0a432cf6e2a04ee6bb74f22)
Change-Id: I0aabba8cf7d0d9db1d84a9151b7659d045d790ca
Also fix a bug in default print profiles
Change-Id: I515e8762870968acce8fe17bdf33c7d380b3c29b
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
(cherry picked from commit 33c0a597c8b5390790772da06d880f6c03259817)
Reduce the wiping speed of the mouth.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I23bda42affc173a4d88ccfb1f4b79943d0bbecdc
(cherry picked from commit 12971f00f8918ce30634ef7467753fde0a562d82)
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id14f3d91171b81239b336ef879061c6de7d68edf
1. use extruder_clearance_max_radius instead
2. set the value of P1P/P1S to the same value of X1C
JIRA: STUDIO-4214
Change-Id: I1ae5e4203db0933854b4388b5505dbf34b40edae
(cherry picked from commit 19cb6a0fbad0192d39813e449baed090baa163c5)
Remember C10 is for traditional timelapse, C11 is smooth timelapse.
The mother profile of all machines should be right.
Change-Id: Ia941f743d2a81ef4b5b4fa08a37ca654eb86d0d7
1. It seems there are a lot of buffered frames in IP CAM. Have to
wait enough time untill all buffers are flushed.
2. From watermellon's suggestion, increase travel speed duing layer
change, to save time and reduce oozing.
JIRA: STUDIO-2167
Change-Id: Ia2ec0bde216e90207897c00c395f7e02ea2fe342
(cherry picked from commit 9c85a7c68617b1628e1698912da20f1ebc69ec16)
It's not necessary to pause before photo-shooting, but after it.
Pausng by 50ms should be enough.
Jira: STUDIO-2167
Change-Id: I88ba5db1d6cce390ae5e26ac03533b0ee277b5bd
(cherry picked from commit ae34c0b9e875d1e52798a5359b0cce2151942fb8)
move to the middle upper edge of plate and ratract after calibrating to avoid leakage
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Idb09aaafee3bfccfd7c14d1140778498195b98c3
fix the text errot of density of PolyTerra
z_hop_type change to auto
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I7f59d2620b42d2f2092ebb4c01ac3a5455c40a4f
1 extrude move to dustbin
2 max vol of TPU 95A of X1 to 3.6
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0b9d2a1db9c57c58255f95aad8a77772317a3ec9
Start gcode of P1P is wrong.
This is for github issue #1044
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id078b7c9020ef773373c3486f74dc51385b9dcc0
