1. Change default ensure_vertical_shell_thickness value back to ensure_all as suggested by @igiannakas
2. Change default sparse_infill_pattern vaule to ipCrossHatch
* Replace M109 S[material_print_temperature_layer_0] with M109 S[first_layer_temperature]
* Change line width to match nozzle
* Change line_width for Ender-3 S1 Plus
* Update creality_cr10se_buildplate_model.stl
* Change line width to match nozzle size (Ender3v3SE)
* Fix Ender-3 S1 Plus 0.8 bed size
* Enable Z-hop for Ender-3 S1 Plus
* Trying something
* Update creality_ender3s1plus_buildplate_model.stl
* Fix CR-10 SE print size
* Various Flying Bear fixes
* Try fixing error
* Revert "Try fixing error"
This reverts commit e42e016e4ab5472e8577db6a3faac8a4cd337161.
* Add minor Ender-3 V3 KE improvements
* Maybe this will fix the error?
* Revert "Maybe this will fix the error?"
This reverts commit 5e7873251b558c72c809a40dc4164e4b26eaaf54.
* Revert "Various Flying Bear fixes"
This reverts commit babca572dcf2a42f3b1ad6e67495bea192bc2168.
* Fix CR-10 SE G-Code
Recommended by @bkonosky
* Minor changes to Ender-3 V3 KE
* Probe when bed is heated (Ender-3 V3 KE)
* Minor changes to Ender-3 V3 KE
* Fix oozing (Ende-3 V3 KE)
* Change retraction settings
* Use different retraction settings
* Revert "Use different retraction settings"
This reverts commit 854decf848fcba18d8b86d89339acb63cce050d0.
* try this
* Remove "role_based_wipe_speed": "0",
* Add changes from CR-10 SE Config #4966
* Add "role_based_wipe_speed" : "0",
* Up retraction speed
* Missed this
* Resolve merge conflicts
* Resolve merge conflicts
* Change retraction & wipe speed
* Revert line removal
* Change wipe_speed to 200mm/s
* Forgot the 0.16mm
* Add BED_MESH_CALIBRATE PROBE_COUNT=6,6
* Improve for Matte PLA
* Compensate for fan speed
* Fix CANCEL_PRINT bug
* Move SET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 to start g-code
* Disable infill combination for 0.2 & 0.24
* Fix end G-Code
* Disable arc fitting
This fixes the merge conflict
* temp
* Revert "temp"
This reverts commit 4bbc028ade560a5058aca18e6b7cad0840833a5a.
* e3v3se: remove jerk settings from processes
Remove jerk settings from Ender3 V3 SE processes to prevent emission of M205 into gcode.
This is due to E3 V3 SE does not use jerk, but has junction deviation
enabled instead. Those two modes are mutually exclusive according to
marlin configuration page:
https://marlinfw.org/docs/configuration/configuration.html#default-acceleration-https://marlinfw.org/docs/configuration/configuration.html#junction-deviation-
Based on M503 output, E3V3SE hase junction deviation enabled:
echo:; Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>
echo: M205 B20000.00 S0.00 T0.00 J0.10
"M205" emitted into gcode is useless since setting jerk settings via
"M205 Xn Yn Zn" does not have any effect on the stock V3 SE firmware.
* e3v3se: update machine retraction settings
Set retraction speed to 40 mm/s as recommended by Creality
Source: https://wiki.creality.com/en/ender-series/ender-3-v3-se/quick-start-guide/user-manual
Set retraction acceleration to 500 mm/s2 to prevent extruder clicking on retraction.
* e3v3se: update start gcode
* Set and wait for bed temperature to stabilize prior to homing.
Bed mesh calibration is done with the bed temp set to 60C.
Performing G28 with bed at room temperature will not compensate
for thermal deformation introduced by heated bed if there are any.
* Remove explicit mesh levelling enable (M420).
Creality FW auto enables M420 once homing (G28) is complete:
"M420 S1 Z10.00"
* Add Ender-3 V3 SE .2, .6, .8 and fix small Ender-3 Pro bug
* Forgot to remove these
* Fix error
* Remove these...
* Why did I delete this?
* Revert deletion
* Add missing profiles
* Create 0.24mm Draft @Creality Ender3V3KE.json
* Apply new nozzle sizes to generic filament
* Maybe this will do it
* Revert 0.4 renames & add to Generic ABS
* Add M420 S1; Enable mesh leveling
* Fix wring nozzle_diameter
* Potentially fix the issue of printer not being added after selected
