amd/orcaslicer
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1

update WIKI

Browse source
This commit is contained in:
SoftFever 2023-11-17 20:00:12 +08:00
parent cb038d0469
commit f5ec607b6a
1 changed files with 3 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
doc/Chamber-temperature.md
View file

@ -21,7 +21,7 @@ Bellow is a reference configuration for Klipper.
[heater_generic chamber_heater] [heater_generic chamber_heater]
heater_pin:PB10 heater_pin:PB10
max_power:1.0 max_power:1.0
# Note: here the temperature sensor should be the sensor you are using for chamber temperature, not the PTC sensor # Orca note: here the temperature sensor should be the sensor you are using for chamber temperature, not the PTC sensor
sensor_type:NTC 100K MGB18-104F39050L32 sensor_type:NTC 100K MGB18-104F39050L32
sensor_pin:PA1 sensor_pin:PA1
control = pid control = pid
@ -43,6 +43,8 @@ gcode:
M117 Chamber heating cancelled M117 Chamber heating cancelled
{% else %} {% else %}
SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={s} SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={s}
# Orca: uncomment the following line if you want to use heat bed to assist chamber heating
# M140 S100
TEMPERATURE_WAIT SENSOR="heater_generic chamber_heater" MINIMUM={s-1} MAXIMUM={s+1} TEMPERATURE_WAIT SENSOR="heater_generic chamber_heater" MINIMUM={s-1} MAXIMUM={s+1}
M117 Chamber at target temperature M117 Chamber at target temperature
{% endif %} {% endif %}