amd/orcaslicer
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1

Improvements and fixes for Creality K2 Plus (#8154)

Browse source
This commit is contained in:
Thomas 2025-01-23 16:51:53 +01:00 committed by GitHub
parent 85e9d32660
commit ddef92ccd6
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
30 changed files with 77 additions and 19 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json
View file

@ -17,6 +17,7 @@
"slow_down_min_speed": [
"20"
],
"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
"compatible_printers": [
"Creality K2 Plus 0.2 nozzle",
"Creality K2 Plus 0.4 nozzle",

1
resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json
View file

@ -17,6 +17,7 @@
"slow_down_min_speed": [
"20"
],
"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
"compatible_printers": [
"Creality K2 Plus 0.2 nozzle",
"Creality K2 Plus 0.4 nozzle",

1
resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json
View file

@ -14,6 +14,7 @@
"fan_min_speed": [
"30"
],
"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
"compatible_printers": [
"Creality K2 Plus 0.2 nozzle",
"Creality K2 Plus 0.4 nozzle",

1
resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json
View file

@ -50,6 +50,7 @@
"reduce_fan_stop_start_freq": [
"1"
],
"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
"compatible_printers": [
"Creality K2 Plus 0.2 nozzle",
"Creality K2 Plus 0.4 nozzle",

1
resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json
View file

@ -44,6 +44,7 @@
"reduce_fan_stop_start_freq": [
"1"
],
"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
"compatible_printers": [
"Creality K2 Plus 0.2 nozzle",
"Creality K2 Plus 0.4 nozzle",

1
resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json
View file

@ -32,6 +32,7 @@
"reduce_fan_stop_start_freq": [
"1"
],
"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
"compatible_printers": [
"Creality K2 Plus 0.2 nozzle",
"Creality K2 Plus 0.4 nozzle",

16
resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json
View file

@ -20,9 +20,10 @@
],
"printable_height": "350",
"nozzle_type": "hardened_steel",
"nozzle_volume": "183",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_multi_bed_types": "0",
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
@ -91,7 +92,7 @@
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"2"
"1"
],
"retract_before_wipe": [
"70%"
@ -108,7 +109,14 @@
"deretraction_speed": [
"40"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"349"
],
"enable_filament_ramming": "0",
"purge_in_prime_tower": "0",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"parking_pos_retraction": "0",
@ -127,12 +135,12 @@
"default_filament_profile": [
"Creality Generic PLA @K2-all"
],
"machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_pause_gcode": "PAUSE",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
"scan_first_layer": "0",
"thumbnails_format":"PNG",
"thumbnails_format": "PNG",
"thumbnails": [
"300x300",
"96x96"

20
resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json
View file

@ -20,9 +20,10 @@
],
"printable_height": "350",
"nozzle_type": "hardened_steel",
"nozzle_volume": "183",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_multi_bed_types": "0",
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
@ -91,13 +92,13 @@
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"2"
"1"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"0.5"
"0.8"
],
"retract_length_toolchange": [
"0"
@ -108,7 +109,14 @@
"deretraction_speed": [
"40"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"349"
],
"enable_filament_ramming": "0",
"purge_in_prime_tower": "0",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"parking_pos_retraction": "0",
@ -120,19 +128,19 @@
"0.4"
],
"wipe_distance": [
"1"
"2"
],
"single_extruder_multi_material": "1",
"manual_filament_change": "0",
"default_filament_profile": [
"Creality Generic PLA @K2-all"
],
"machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_pause_gcode": "PAUSE",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
"scan_first_layer": "0",
"thumbnails_format":"PNG",
"thumbnails_format": "PNG",
"thumbnails": [
"300x300",
"96x96"

16
resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json
View file

@ -20,9 +20,10 @@
],
"printable_height": "350",
"nozzle_type": "hardened_steel",
"nozzle_volume": "183",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_multi_bed_types": "0",
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
@ -91,7 +92,7 @@
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"2"
"1"
],
"retract_before_wipe": [
"70%"
@ -108,7 +109,14 @@
"deretraction_speed": [
"40"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"349"
],
"enable_filament_ramming": "0",
"purge_in_prime_tower": "0",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"parking_pos_retraction": "0",
@ -127,7 +135,7 @@
"default_filament_profile": [
"Creality Generic PLA @K2-all"
],
"machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_pause_gcode": "PAUSE",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
@ -137,4 +145,4 @@
"300x300",
"96x96"
]
}
}

18
resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json
View file

@ -20,9 +20,10 @@
],
"printable_height": "350",
"nozzle_type": "hardened_steel",
"nozzle_volume": "183",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_multi_bed_types": "0",
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
@ -91,7 +92,7 @@
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"2"
"1"
],
"retract_before_wipe": [
"70%"
@ -108,7 +109,14 @@
"deretraction_speed": [
"40"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"349"
],
"enable_filament_ramming": "0",
"purge_in_prime_tower": "0",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"parking_pos_retraction": "0",
@ -127,14 +135,14 @@
"default_filament_profile": [
"Creality Generic PLA @K2-all"
],
"machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_pause_gcode": "PAUSE",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
"scan_first_layer": "0",
"thumbnails_format":"PNG",
"thumbnails_format": "PNG",
"thumbnails": [
"300x300",
"96x96"
]
}
}

1
resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.25",
"inner_wall_speed": "150",
"wall_loops": "4",

1
resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "350",
"wall_loops": "2",

1
resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.25",
"inner_wall_speed": "150",
"wall_loops": "4",

1
resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.25",
"inner_wall_speed": "150",
"wall_loops": "4",

1
resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "300",
"wall_loops": "2",

1
resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.25",
"inner_wall_speed": "150",
"wall_loops": "4",

1
resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "300",
"wall_loops": "2",

1
resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.65",
"inner_wall_speed": "150",
"wall_loops": "2",

1
resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "300",
"wall_loops": "2",

1
resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.82",
"inner_wall_speed": "150",
"wall_loops": "2",

1
resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "300",
"wall_loops": "2",

1
resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.65",
"inner_wall_speed": "150",
"wall_loops": "2",

1
resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "200",
"wall_loops": "2",

1
resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.65",
"inner_wall_speed": "150",
"wall_loops": "2",

1
resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.82",
"inner_wall_speed": "150",
"wall_loops": "2",

1
resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.65",
"inner_wall_speed": "150",
"wall_loops": "2",

1
resources/profiles/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.82",
"inner_wall_speed": "150",
"wall_loops": "2",

1
resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.65",
"inner_wall_speed": "150",
"wall_loops": "2",

1
resources/profiles/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.82",
"inner_wall_speed": "150",
"wall_loops": "2",

1
resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json
View file

@ -54,6 +54,7 @@
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.82",
"inner_wall_speed": "150",
"wall_loops": "2",