From dcddf9974aa8101898bc9f2be8471040ac6775a0 Mon Sep 17 00:00:00 2001 From: Hotsolidinfill <138652683+Hotsolidinfill@users.noreply.github.com> Date: Tue, 14 Nov 2023 18:16:00 +0900 Subject: [PATCH] Update translation Korean (#2731) update translation korean --- localization/i18n/ko/OrcaSlicer_ko.po | 38 ++++++++++++++++----------- 1 file changed, 22 insertions(+), 16 deletions(-) diff --git a/localization/i18n/ko/OrcaSlicer_ko.po b/localization/i18n/ko/OrcaSlicer_ko.po index 959e04a20..5a423e8c9 100644 --- a/localization/i18n/ko/OrcaSlicer_ko.po +++ b/localization/i18n/ko/OrcaSlicer_ko.po @@ -8,8 +8,9 @@ msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2023-11-10 14:54+0800\n" -"PO-Revision-Date: 2023-10-26 16:47+0900\n" -"Last-Translator: Hotsolidinfill\n" +"PO-Revision-Date: 2023-11-14 11:26+0900\n" +"Last-Translator: Hotsolidinfill <138652683+Hotsolidinfill@users.noreply." +"github.com>, crwusiz \n" "Language-Team: \n" "Language: ko_KR\n" "MIME-Version: 1.0\n" @@ -653,6 +654,9 @@ msgid "" "Please note, application settings will be lost, but printer profiles will " "not be affected." msgstr "" +"OrcaSlicer 구성 파일이 손상되어 구문을 분석할 수 없습니다.\n" +"OrcaSlicer가 구성 파일을 다시 생성하려고 시도했습니다.\n" +"응용 프로그램 설정은 손실되지만 프린터 프로필은 영향을 받지 않습니다." msgid "Rebuild" msgstr "재빌드" @@ -4998,13 +5002,13 @@ msgid "Units" msgstr "단위" msgid "Home" -msgstr "" +msgstr "홈" msgid "Default Page" -msgstr "" +msgstr "기본 페이지" msgid "Set the page opened on startup." -msgstr "" +msgstr "시작 시 열리는 페이지를 설정합니다." msgid "Zoom to mouse position" msgstr "마우스 위치로 확대" @@ -5023,10 +5027,10 @@ msgstr "" "카메라 앵글을 사용합니다." msgid "Show splash screen" -msgstr "" +msgstr "스플래시 화면 표시" msgid "Show the splash screen during startup." -msgstr "" +msgstr "시작하는 동안 스플래시 화면을 표시합니다." msgid "Show \"Tip of the day\" notification after start" msgstr "시작 후 \"오늘의 팁\" 알림 표시" @@ -5819,8 +5823,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "툴헤드 없이 시간 경과를 기록할 경우 \"타임랩스 닦기 타워\"를 추가하는 것이 좋" "습니다\n" @@ -6094,7 +6098,7 @@ msgid "Change filament G-code" msgstr "필라멘트 교체 G코드" msgid "Change extrusion role G-code" -msgstr "" +msgstr "압출 역할 G코드 변경" msgid "Pause G-code" msgstr "일시정지 G코드" @@ -7698,7 +7702,7 @@ msgid "Enable this option to slow printing down for different overhang degree" msgstr "돌출부 정도에 따라 출력 속도를 낮추려면 이 옵션을 활성화합니다" msgid "Slow down for curled perimeters" -msgstr "꺾여 있는 둘레에는 속도를 줄이세요" +msgstr "꺾여 있는 둘레에서 감속" msgid "" "Enable this option to slow printing down in areas where potential curled " @@ -8615,10 +8619,10 @@ msgstr "팬 최대 속도 레이어" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "팬 속도는 \"close_fan_the_first_x_layers\" 의 0에서 \"full_fan_speed_layer\" " "의 최고 속도까지 선형적으로 증가합니다. \"full_fan_speed_layer\"가 " @@ -9255,6 +9259,8 @@ msgid "" "cooling is enabled, when printing overhangs and when feature speeds are not " "specified explicitly." msgstr "" +"보다 나은 레이어 냉각을 위해 속도를 늦출 때, 돌출부 출력 속도가 명시적으로 지" +"정되지 않은 경우 필라멘트의 최소 출력 속도가 활성화됩니다." msgid "Nozzle diameter" msgstr "노즐 직경" @@ -10288,7 +10294,7 @@ msgstr "" "니다" msgid "This gcode is inserted when the extrusion role is changed" -msgstr "" +msgstr "이 G코드는 압출 역할이 변경될 때 삽입됩니다." msgid "" "Line width for top surfaces. If expressed as a %, it will be computed over "