amd/orcaslicer
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1

Updated chamber temperature control tooltips (#6517)

Browse source
This commit is contained in:
Ioannis Giannakas 2024-08-22 17:05:43 +01:00 committed by GitHub
parent cd4de6be7e
commit bcf45a332e
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
1 changed files with 10 additions and 4 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

14
src/libslic3r/PrintConfig.cpp
View file

@ -4755,15 +4755,21 @@ void PrintConfigDef::init_fff_params()
def = this->add("activate_chamber_temp_control",coBools);
def->label = L("Activate temperature control");
def->tooltip = L("Enable this option for chamber temperature control. An M191 command will be added before \"machine_start_gcode\"\nG-code commands: M141/M191 S(0-255)");
def->tooltip = L("Enable this option for automated chamber temperature control. This option activates the emitting of an M191 command before the \"machine_start_gcode\"\n which sets the "
"chamber temperature and waits until it is reached. In addition, it emits an M141 command at the end of the print to turn off the chamber heater, if present. \n\n"
"This option relies on the firmware supporting the M191 and M141 commands either via macros or natively and is usually used when an active chamber heater is installed.");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBools{false});
def = this->add("chamber_temperature", coInts);
def->label = L("Chamber temperature");
def->tooltip = L("Higher chamber temperature can help suppress or reduce warping and potentially lead to higher interlayer bonding strength for high temperature materials like ABS, ASA, PC, PA and so on."
"At the same time, the air filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and other low temperature materials,"
"the actual chamber temperature should not be high to avoid cloggings, so 0 which stands for turning off is highly recommended"
def->tooltip = L("For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber temperature can help suppress or reduce warping and potentially lead to higher interlayer bonding strength. "
"However, at the same time, a higher chamber temperature will reduce the efficiency of air filtration for ABS and ASA. \n\n"
"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option should be disabled (set to 0) as the chamber temperature should be low to avoid extruder clogging caused "
"by material softening at the heat break.\n\n"
"If enabled, this parameter also sets a gcode variable named chamber_temperature, which can be used to pass the desired chamber temperature to your print start macro, "
"or a heat soak macro like this: PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may be useful if your printer does not support M141/M191 commands, or if you desire "
"to handle heat soaking in the print start macro if no active chamber heater is installed."
);
def->sidetext = L("°C");
def->full_label = L("Chamber temperature");