diff --git a/resources/profiles/Creality.json b/resources/profiles/Creality.json index a72b06b07..a17539936 100644 --- a/resources/profiles/Creality.json +++ b/resources/profiles/Creality.json @@ -64,6 +64,10 @@ "name": "Creality Ender-3 V3", "sub_path": "machine/Creality Ender-3 V3.json" }, + { + "name": "Creality Ender-3 V3 Plus", + "sub_path": "machine/Creality Ender-3 V3 Plus.json" + }, { "name": "Creality Ender-5", "sub_path": "machine/Creality Ender-5.json" @@ -334,6 +338,10 @@ "name": "0.12mm Fine @Creality Ender3V3", "sub_path": "process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json" }, + { + "name": "0.12mm Fine @Creality Ender3V3Plus", + "sub_path": "process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json" + }, { "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.2", "sub_path": "process/0.12mm Detail @Creality Ender5Pro (2019) 0.2.json" @@ -462,6 +470,10 @@ "name": "0.16mm Optimal @Creality Ender3V3", "sub_path": "process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json" }, + { + "name": "0.16mm Optimal @Creality Ender3V3Plus", + "sub_path": "process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json" + }, { "name": "0.16mm Optimal @Creality Ender5", "sub_path": "process/0.16mm Optimal @Creality Ender5.json" @@ -626,6 +638,10 @@ "name": "0.20mm Standard @Creality Ender3V3", "sub_path": "process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json" }, + { + "name": "0.20mm Standard @Creality Ender3V3Plus", + "sub_path": "process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json" + }, { "name": "0.20mm Standard @Creality Ender5", "sub_path": "process/0.20mm Standard @Creality Ender5.json" @@ -766,6 +782,14 @@ "name": "0.24mm Draft @Creality Ender3V3", "sub_path": "process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json" }, + { + "name": "0.24mm Draft @Creality Ender3V3Plus", + "sub_path": "process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json" + }, + { + "name": "0.24mm Optimal @Creality Ender3V3Plus", + "sub_path": "process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json" + }, { "name": "0.24mm Draft @Creality Ender3S1Plus 0.2", "sub_path": "process/0.24mm Draft @Creality Ender3S1Plus 0.2.json" @@ -826,6 +850,14 @@ "name": "0.36mm Draft @Creality Ender3V3", "sub_path": "process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json" }, + { + "name": "0.30mm Standard @Creality Ender3V3Plus", + "sub_path": "process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json" + }, + { + "name": "0.36mm Draft @Creality Ender3V3Plus", + "sub_path": "process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json" + }, { "name": "0.28mm SuperDraft @Creality CR-6 0.4", "sub_path": "process/0.28mm SuperDraft @Creality CR-6 0.4.json" @@ -1310,6 +1342,14 @@ "name": "Creality Ender-3 V3 0.6 nozzle", "sub_path": "machine/Creality Ender-3 V3 0.6 nozzle.json" }, + { + "name": "Creality Ender-3 V3 Plus 0.4 nozzle", + "sub_path": "machine/Creality Ender-3 V3 Plus 0.4 nozzle.json" + }, + { + "name": "Creality Ender-3 V3 Plus 0.6 nozzle", + "sub_path": "machine/Creality Ender-3 V3 Plus 0.6 nozzle.json" + }, { "name": "Creality Ender-5 0.4 nozzle", "sub_path": "machine/Creality Ender-5 0.4 nozzle.json" diff --git a/resources/profiles/Creality/Creality Ender-3 V3 Plus_cover.png b/resources/profiles/Creality/Creality Ender-3 V3 Plus_cover.png new file mode 100644 index 000000000..1c33bec2f Binary files /dev/null and b/resources/profiles/Creality/Creality Ender-3 V3 Plus_cover.png differ diff --git a/resources/profiles/Creality/creality_ender3v3plus_buildplate_model.stl b/resources/profiles/Creality/creality_ender3v3plus_buildplate_model.stl new file mode 100644 index 000000000..c742406e3 Binary files /dev/null and b/resources/profiles/Creality/creality_ender3v3plus_buildplate_model.stl differ diff --git a/resources/profiles/Creality/creality_ender3v3plus_buildplate_texture.png.png b/resources/profiles/Creality/creality_ender3v3plus_buildplate_texture.png.png new file mode 100644 index 000000000..4dcf16e60 Binary files /dev/null and b/resources/profiles/Creality/creality_ender3v3plus_buildplate_texture.png.png differ diff --git a/resources/profiles/Creality/filament/Creality Generic ABS @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic ABS @Ender-3V3-all.json index 4e2ec8c49..e28e1487f 100644 --- a/resources/profiles/Creality/filament/Creality Generic ABS @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic ABS @Ender-3V3-all.json @@ -14,6 +14,8 @@ "Creality Ender-3 V3 SE 0.8 nozzle", "Creality Ender-3 V3 KE 0.4 nozzle", "Creality Ender-3 V3 0.4 nozzle", - "Creality Ender-3 V3 0.6 nozzle" + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic ASA @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic ASA @Ender-3V3-all.json index dfc94c357..bf2d0f338 100644 --- a/resources/profiles/Creality/filament/Creality Generic ASA @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic ASA @Ender-3V3-all.json @@ -14,6 +14,8 @@ "Creality Ender-3 V3 SE 0.8 nozzle", "Creality Ender-3 V3 KE 0.4 nozzle", "Creality Ender-3 V3 0.4 nozzle", - "Creality Ender-3 V3 0.6 nozzle" + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PA-CF @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic PA-CF @Ender-3V3-all.json index c857a1f8c..1c86dd11b 100644 --- a/resources/profiles/Creality/filament/Creality Generic PA-CF @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic PA-CF @Ender-3V3-all.json @@ -7,6 +7,8 @@ "instantiation": "true", "compatible_printers": [ "Creality Ender-3 V3 0.4 nozzle", - "Creality Ender-3 V3 0.6 nozzle" + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PETG @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic PETG @Ender-3V3-all.json index 45c1b47c0..6b93b8573 100644 --- a/resources/profiles/Creality/filament/Creality Generic PETG @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic PETG @Ender-3V3-all.json @@ -24,6 +24,8 @@ "Creality Ender-3 V3 SE 0.8 nozzle", "Creality Ender-3 V3 KE 0.4 nozzle", "Creality Ender-3 V3 0.4 nozzle", - "Creality Ender-3 V3 0.6 nozzle" + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic PLA @Ender-3V3-all.json index fb286b690..e2f894145 100644 --- a/resources/profiles/Creality/filament/Creality Generic PLA @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic PLA @Ender-3V3-all.json @@ -22,6 +22,8 @@ "Creality Ender-3 V3 SE 0.8 nozzle", "Creality Ender-3 V3 KE 0.4 nozzle", "Creality Ender-3 V3 0.4 nozzle", - "Creality Ender-3 V3 0.6 nozzle" + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json index e5ca2eb13..4c268755f 100644 --- a/resources/profiles/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json @@ -15,6 +15,8 @@ "Creality Ender-3 V3 SE 0.8 nozzle", "Creality Ender-3 V3 KE 0.4 nozzle", "Creality Ender-3 V3 0.4 nozzle", - "Creality Ender-3 V3 0.6 nozzle" + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json index 5111e5091..743bb8ce1 100644 --- a/resources/profiles/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json @@ -13,6 +13,8 @@ "Creality Ender-3 V3 SE 0.8 nozzle", "Creality Ender-3 V3 KE 0.4 nozzle", "Creality Ender-3 V3 0.4 nozzle", - "Creality Ender-3 V3 0.6 nozzle" + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json index 85890efec..389abbe0b 100644 --- a/resources/profiles/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json @@ -13,6 +13,8 @@ "Creality Ender-3 V3 SE 0.8 nozzle", "Creality Ender-3 V3 KE 0.4 nozzle", "Creality Ender-3 V3 0.4 nozzle", - "Creality Ender-3 V3 0.6 nozzle" + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic TPU @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic TPU @Ender-3V3-all.json index 7573352da..a776cc82a 100644 --- a/resources/profiles/Creality/filament/Creality Generic TPU @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic TPU @Ender-3V3-all.json @@ -20,6 +20,8 @@ "Creality Ender-3 V3 SE 0.8 nozzle", "Creality Ender-3 V3 KE 0.4 nozzle", "Creality Ender-3 V3 0.4 nozzle", - "Creality Ender-3 V3 0.6 nozzle" + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.4 nozzle.json new file mode 100644 index 000000000..c3f9026db --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.4 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 V3 Plus 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V3 Plus", + "gcode_flavor": "klipper", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3 V3 Plus", + "nozzle_diameter": [ + "0.4" + ], + "printer_variant": "0.4", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "330", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "1", + "support_air_filtration": "0", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "800", + "800" + ], + "machine_max_speed_y": [ + "800", + "800" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.3" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.6" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "101", + "extruder_clearance_height_to_rod": "45", + "extruder_clearance_radius": "45", + "z_hop": [ + "0.12" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "PAUSE", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality Generic PLA @Ender-3V3-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "320x320" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.6 nozzle.json new file mode 100644 index 000000000..36e6dadd8 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.6 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 V3 Plus 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V3 Plus", + "gcode_flavor": "klipper", + "printer_structure": "i3", + "default_print_profile": "0.30mm Standard @Creality Ender3 V3 Plus", + "nozzle_diameter": [ + "0.6" + ], + "printer_variant": "0.6", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "330", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "1", + "support_air_filtration": "0", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "800", + "800" + ], + "machine_max_speed_y": [ + "800", + "800" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.3" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.6" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "101", + "extruder_clearance_height_to_rod": "45", + "extruder_clearance_radius": "45", + "z_hop": [ + "0.12" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "PAUSE", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality Generic PLA @Ender-3V3-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "320x320" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus.json new file mode 100644 index 000000000..a00cd7998 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-3 V3 Plus", + "model_id": "Creality-Ender3-V3-Plus", + "nozzle_diameter": "0.4;0.6", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender3v3plus_buildplate_model.stl", + "bed_texture": "creality_ender3v3plus_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic ABS @Ender-3V3-all;Creality Generic ASA @Ender-3V3-all;Creality Generic PETG @Ender-3V3-all;Creality Generic PLA @Ender-3V3-all;Creality Generic PLA High Speed @Ender-3V3-all;Creality Generic PLA Matte @Ender-3V3-all;Creality Generic PLA Silk @Ender-3V3-all;Creality Generic TPU @Ender-3V3-all" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json new file mode 100644 index 000000000..f8d4fbf68 --- /dev/null +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender-3 V3 Plus", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Ender-3 V3 Plus 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.12", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "300", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.6", + "travel_acceleration": "8000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json new file mode 100644 index 000000000..bc4759b23 --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender-3 V3 Plus", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Ender-3 V3 Plus 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.16", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "300", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.16", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "8000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json new file mode 100644 index 000000000..43b0d288d --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender-3 V3 Plus", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Ender-3 V3 Plus 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "300", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "8000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json new file mode 100644 index 000000000..8fa65486f --- /dev/null +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender-3 V3 Plus", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Ender-3 V3 Plus 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "8000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json new file mode 100644 index 000000000..3623f1f14 --- /dev/null +++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Optimal @Creality Ender-3 V3 Plus", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.24", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "8000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality Ender-3 V3 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json new file mode 100644 index 000000000..67aaeb111 --- /dev/null +++ b/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.30mm Standard @Creality Ender-3 V3 Plus", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.3", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "8000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality Ender-3 V3 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json new file mode 100644 index 000000000..f5dd324a7 --- /dev/null +++ b/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.36mm Draft @Creality Ender-3 V3 Plus", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.36", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.36", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "8000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality Ender-3 V3 Plus 0.6 nozzle" + ] +} \ No newline at end of file