ENH: allow generate wipe tower when print ByObject

allow generate wipe tower when print ByObject if there is only one object

Change-Id: I199e9cab7bd7c963edf58e829c663bb91c12f4f8
(cherry picked from commit 7153c30800022f3afb9811c67f88ba28c9b25d20)

src/libslic3r/GCode.cpp

@@ -1409,6 +1409,8 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
         // We don't allow switching of extruders per layer by Model::custom_gcode_per_print_z in sequential mode.
         // Use the extruder IDs collected from Regions.
         this->set_extruders(print.extruders());
+
+        has_wipe_tower = print.has_wipe_tower() && tool_ordering.has_wipe_tower();
     } else {
         // Find tool ordering for all the objects at once, and the initial extruder ID.
         // If the tool ordering has been pre-calculated by Print class for wipe tower already, reuse it.
@@ -1582,7 +1584,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
         file.write("M981 S1 P20000 ;open spaghetti detector\n");
 
     // Do all objects for each layer.
-    if (print.config().print_sequence == PrintSequence::ByObject) {
+    if (print.config().print_sequence == PrintSequence::ByObject && !has_wipe_tower) {
         size_t finished_objects = 0;
         const PrintObject *prev_object = (*print_object_instance_sequential_active)->print_object;
         for (; print_object_instance_sequential_active != print_object_instances_ordering.end(); ++ print_object_instance_sequential_active) {
@@ -2752,8 +2754,9 @@ GCode::LayerResult GCode::process_layer(
         // BBS: ordering instances by extruder
         std::vector<InstanceToPrint> instances_to_print;
         bool has_prime_tower = print.config().enable_prime_tower
-            && print.config().print_sequence == PrintSequence::ByLayer
-            && print.extruders().size() > 1;
+            && print.extruders().size() > 1
+            && (print.config().print_sequence == PrintSequence::ByLayer
+                || (print.config().print_sequence == PrintSequence::ByObject && print.objects().size() == 1));
         if (has_prime_tower) {
             int plate_idx = print.get_plate_index();
             Point wt_pos(print.config().wipe_tower_x.get_at(plate_idx), print.config().wipe_tower_y.get_at(plate_idx));

src/libslic3r/PrintApply.cpp

@@ -1024,7 +1024,7 @@ Print::ApplyStatus Print::apply(const Model &model, DynamicPrintConfig new_full_
 
     //new_full_config.normalize_fdm(used_filaments);
     new_full_config.normalize_fdm_1();
-    t_config_option_keys changed_keys = new_full_config.normalize_fdm_2(used_filaments);
+    t_config_option_keys changed_keys = new_full_config.normalize_fdm_2(objects().size(), used_filaments);
     if (changed_keys.size() > 0) {
         BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(", got changed_keys, size=%1%")%changed_keys.size();
         for (int i = 0; i < changed_keys.size(); i++)
@@ -1415,7 +1415,7 @@ Print::ApplyStatus Print::apply(const Model &model, DynamicPrintConfig new_full_
 
     //BBS: check the config again
     int new_used_filaments = this->extruders(true).size();
-    t_config_option_keys new_changed_keys = new_full_config.normalize_fdm_2(new_used_filaments);
+    t_config_option_keys new_changed_keys = new_full_config.normalize_fdm_2(objects().size(), new_used_filaments);
     if (new_changed_keys.size() > 0) {
         BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(", got new_changed_keys, size=%1%")%new_changed_keys.size();
         for (int i = 0; i < new_changed_keys.size(); i++)

src/libslic3r/PrintConfig.cpp

@@ -4035,7 +4035,7 @@ void DynamicPrintConfig::normalize_fdm_1()
     return;
 }
 
-t_config_option_keys DynamicPrintConfig::normalize_fdm_2(int used_filaments)
+t_config_option_keys DynamicPrintConfig::normalize_fdm_2(int num_objects, int used_filaments)
 {
     t_config_option_keys changed_keys;
     ConfigOptionBool* ept_opt = this->option<ConfigOptionBool>("enable_prime_tower");
@@ -4046,7 +4046,7 @@ t_config_option_keys DynamicPrintConfig::normalize_fdm_2(int used_filaments)
 
         ConfigOptionEnum<TimelapseType>* timelapse_opt = this->option<ConfigOptionEnum<TimelapseType>>("timelapse_type");
         bool is_smooth_timelapse = timelapse_opt != nullptr && timelapse_opt->value == TimelapseType::tlSmooth;
-        if (!is_smooth_timelapse && (used_filaments == 1 || ps_opt->value == PrintSequence::ByObject)) {
+        if (!is_smooth_timelapse && (used_filaments == 1 || (ps_opt->value == PrintSequence::ByObject && num_objects > 1))) {
             if (ept_opt->value) {
                 ept_opt->value = false;
                 changed_keys.push_back("enable_prime_tower");

src/libslic3r/PrintConfig.hpp

@@ -361,7 +361,7 @@ public:
     void                normalize_fdm(int used_filaments = 0);
     void                normalize_fdm_1();
     //return the changed param set
-    t_config_option_keys normalize_fdm_2(int used_filaments = 0);
+    t_config_option_keys normalize_fdm_2(int num_objects, int used_filaments = 0);
 
     void                set_num_extruders(unsigned int num_extruders);
 

src/slic3r/GUI/GLCanvas3D.cpp

@@ -2521,8 +2521,12 @@ void GLCanvas3D::reload_scene(bool refresh_immediately, bool force_full_scene_re
         auto timelapse_type = dconfig.option<ConfigOptionEnum<TimelapseType>>("timelapse_type");
         bool timelapse_enabled = timelapse_type ? (timelapse_type->value == TimelapseType::tlSmooth) : false;
 
-        if ((timelapse_enabled && wt) || (filaments_count > 1 && wt && co != nullptr && co->value != PrintSequence::ByObject)) {
+        if (wt && (timelapse_enabled || filaments_count > 1)) {
             for (int plate_id = 0; plate_id < n_plates; plate_id++) {
+                // If print ByObject and there is only one object in the plate, the wipe tower is allowed to be generated.
+                if (co != nullptr && co->value == PrintSequence::ByObject && ppl.get_plate(plate_id)->printable_instance_size() != 1)
+                    continue;
+
                 DynamicPrintConfig& proj_cfg = wxGetApp().preset_bundle->project_config;
                 float x = dynamic_cast<const ConfigOptionFloats*>(proj_cfg.option("wipe_tower_x"))->get_at(plate_id);
                 float y = dynamic_cast<const ConfigOptionFloats*>(proj_cfg.option("wipe_tower_y"))->get_at(plate_id);

src/slic3r/GUI/PartPlate.cpp

@@ -1729,6 +1729,26 @@ void PartPlate::update_object_index(int obj_idx_removed, int obj_idx_max)
 
 }
 
+int PartPlate::printable_instance_size()
+{
+    int size = 0;
+    for (std::set<std::pair<int, int>>::iterator it = obj_to_instance_set.begin(); it != obj_to_instance_set.end(); ++it) {
+        int obj_id      = it->first;
+        int instance_id = it->second;
+
+        if (obj_id >= m_model->objects.size())
+			continue;
+
+        ModelObject *  object   = m_model->objects[obj_id];
+        ModelInstance *instance = object->instances[instance_id];
+
+        if ((instance->printable) && (instance_outside_set.find(std::pair(obj_id, instance_id)) == instance_outside_set.end())) {
+            size++;
+        }
+    }
+    return size;
+}
+
 //whether it is has printable instances
 bool PartPlate::has_printable_instances()
 {

src/slic3r/GUI/PartPlate.hpp

@@ -292,6 +292,8 @@ public:
     //whether it is empty
     bool empty() { return obj_to_instance_set.empty(); }
 
+    int printable_instance_size();
+
     //whether it is has printable instances
     bool has_printable_instances();