amd/orcaslicer
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1

Overhang tooltips updates (#6501)

Browse source 
* Overhang tooltips updates
This commit is contained in:
Ioannis Giannakas 2024-08-19 15:54:58 +01:00 committed by GitHub
parent 2acd858bf3
commit 6dc8b28529
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
1 changed files with 15 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

18
src/libslic3r/PrintConfig.cpp
View file

@ -1052,7 +1052,16 @@ void PrintConfigDef::init_fff_params()
def = this->add("slowdown_for_curled_perimeters", coBool); def = this->add("slowdown_for_curled_perimeters", coBool);
def->label = L("Slow down for curled perimeters"); def->label = L("Slow down for curled perimeters");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Enable this option to slow printing down in areas where potential curled perimeters may exist"); def->tooltip = L("Enable this option to slow down printing in areas where perimeters may have curled upwards."
"For example, additional slowdown will be applied when printing overhangs on sharp corners like the "
"front of the Benchy hull, reducing curling which compounds over multiple layers.\n\n "
"It is generally recommended to have this option switched on unless your printer cooling is powerful enough or the "
"print speed slow enough that perimeter curling does not happen. If printing with a high external perimeter speed, "
"this parameter may introduce slight artifacts when slowing down due to the large variance in print speeds. "
"If you notice artifacts, ensure your pressure advance is tuned correctly.\n\n"
"Note: When this option is enabled, overhang perimeters are treated like overhangs, meaning the overhang speed is "
"applied even if the overhanging perimeter is part of a bridge. For example, when the perimeters are 100% overhanging"
", with no wall supporting them from underneath, the 100% overhang speed will be applied.");
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool{ false }); def->set_default_value(new ConfigOptionBool{ false });
@ -1105,7 +1114,10 @@ void PrintConfigDef::init_fff_params()
def = this->add("bridge_speed", coFloat); def = this->add("bridge_speed", coFloat);
def->label = L("External"); def->label = L("External");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Speed of bridge and completely overhang wall"); def->tooltip = L("Speed of the externally visible bridge extrusions. "
"\n\nIn addition, if Slow down for curled perimeters is disabled or Classic overhang mode is enabled, "
"it will be the print speed of overhang walls that are supported by less than 13%, whether they are part of a bridge "
"or an overhang.");
def->sidetext = L("mm/s"); def->sidetext = L("mm/s");
def->min = 1; def->min = 1;
def->mode = comAdvanced; def->mode = comAdvanced;
@ -1114,7 +1126,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("internal_bridge_speed", coFloatOrPercent); def = this->add("internal_bridge_speed", coFloatOrPercent);
def->label = L("Internal"); def->label = L("Internal");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Speed of internal bridge. If the value is expressed as a percentage, it will be calculated based on the bridge_speed. Default value is 150%."); def->tooltip = L("Speed of internal bridges. If the value is expressed as a percentage, it will be calculated based on the bridge_speed. Default value is 150%.");
def->sidetext = L("mm/s or %"); def->sidetext = L("mm/s or %");
def->ratio_over = "bridge_speed"; def->ratio_over = "bridge_speed";
def->min = 1; def->min = 1;