diff --git a/resources/profiles/Creality.ini b/resources/profiles/Creality.ini
index 34c9cbb9b..291fd2247 100644
--- a/resources/profiles/Creality.ini
+++ b/resources/profiles/Creality.ini
@@ -349,7 +349,14 @@ compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diamete
 inherits = *0.28mm*
 compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
 
-# Common filament preset
+# When submitting new filaments please print the following temperature tower at 0.1mm layer height:
+#   https://www.thingiverse.com/thing:2615842
+# Pay particular attention to bridging, overhangs and retractions.
+# Also print the following bed adhesion test at 0.1 layer height as well:
+#   https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
+# At least for PLA, please keep bed temp at 60, as many Creality printers do not have any ABL
+# So having some leeway to get good bed adhesion is not a luxury for many users
+
 [filament:*common*]
 cooling = 0
 compatible_printers = 
@@ -704,12 +711,15 @@ renamed_from = "Creality Ender-3V2"
 printer_model = ENDER3V2
 bed_shape = 0x0,220x0,220x220,0x220
 
+# Intended for printers with a smaller bed, like the Ender-3
 [printer:*fastabl*]
 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set extruder temp for auto bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nG4 S10 ; wait for partial warmup\nG28 ; home all\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; intro line\nG92 E0
 
+# Intended for printers with a larger bed, like the CR-10
 [printer:*slowabl*]
 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set extruder temp for auto bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; intro line\nG92 E0
 
+# Intended for printers where the Z-axis lowers the print bed during printing
 [printer:*invertedz*]
 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+max_print_height-10} F600{endif} ; Move print bed down further down\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors