diff --git a/resources/profiles/PrusaResearch.ini b/resources/profiles/PrusaResearch.ini
index d82921fd8..87950bae7 100644
--- a/resources/profiles/PrusaResearch.ini
+++ b/resources/profiles/PrusaResearch.ini
@@ -121,7 +121,8 @@ top_infill_extrusion_width = 0.45
 top_solid_infill_speed = 40
 travel_speed = 180
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -538,6 +539,10 @@ compatible_printers =
 compatible_printers_condition = 
 end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
+filament_loading_speed = 28
+filament_unloading_speed = 90
+filament_toolchange_delay = 0
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
@@ -591,6 +596,7 @@ fan_always_on = 0
 fan_below_layer_time = 20
 filament_colour = #3A80CA
 filament_max_volumetric_speed = 11
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_type = ABS
 first_layer_bed_temperature = 100
 first_layer_temperature = 255
@@ -763,6 +769,7 @@ fan_always_on = 0
 filament_colour = #FFFFD7
 filament_max_volumetric_speed = 10
 filament_notes = "List of materials tested with standart PVA print settings for MK2:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH"
+filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_soluble = 1
 filament_type = PVA
 first_layer_temperature = 195
@@ -933,6 +940,9 @@ retract_restart_extra_toolchange = 0
 retract_speed = 80
 single_extruder_multi_material = 1
 printer_model = MK2SMM
+parking_pos_retraction = 92
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
 
 [printer:*mm-single*]
 inherits = *multimaterial*