amd/orcaslicer
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1

update WIKI

Browse source
This commit is contained in:
SoftFever 2024-03-04 20:26:50 +08:00
parent 27439ed547
commit 5cbbd053d1
5 changed files with 14 additions and 10 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
doc/Calibration.md
View file

@ -11,11 +11,12 @@
2. [VFA]
**NOTE**: After completing the calibration process, remember to create a new project in order to exit the calibration mode.
**NOTE2**: @ItsDeidara has made a webpage to help with the calculation. Check it out if those equations give you a headache [here](https://orcalibrate.com/).
# Flow rate
##### *NOTE: For Bambulab X1/X1C users, make sure you do not select the 'Flow calibration' option.*
![uncheck](https://user-images.githubusercontent.com/103989404/221345187-3c317a46-4d85-4221-99b9-adb5c7f48026.jpeg)
----------------------------------------
![flowrate](https://user-images.githubusercontent.com/103989404/210137579-3fd141ad-f2da-4542-a1fd-fc4b4d673908.gif)
![flowrate](./images/flow-calibration.gif)
Calibrating the flow rate involves a two-step process.
Steps
1. Select the printer, filament, and process you would like to use for the test.
@ -30,7 +31,7 @@ Steps
7. Repeat steps 4 and 5. In this case, if your previous flow ratio was 1.029 and you selected the block with a flow rate modifier of -6, the new value should be calculated as follows: `1.029x(100-6)/100 = 0.96726`. ** Remember ** to save the filament profile.
![pass2](https://user-images.githubusercontent.com/103989404/210139072-f2fa91a6-4e3b-4d2a-81f2-c50155e1ff6d.jpg)
![-6](https://user-images.githubusercontent.com/103989404/210139131-ee224146-b242-4c1c-ac96-35ef0ca591f1.jpg)
![image](https://user-images.githubusercontent.com/103989404/210139721-919be130-fbba-4e3a-aa58-8a563e8c7792.png)
![image](./images/flowcalibration_update_flowrate.jpg)
# Pressure Advance

3
doc/Seam.md
View file

@ -1,5 +1,8 @@
WIP...
### Scarf joint seam
WIP...
### Seam gap
![image](https://user-images.githubusercontent.com/103989404/215331359-236874c9-ca91-4dd4-b969-3cefc70ebe1b.png)

BIN
doc/images/flow-calibration.gif Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 4.4 MiB

BIN
doc/images/flowcalibration_update_flowrate.jpg Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 62 KiB

12
src/slic3r/GUI/Tab.cpp
View file

@ -1976,12 +1976,12 @@ void TabPrint::build()
optgroup->append_single_option_line("seam_position", "seam");
optgroup->append_single_option_line("staggered_inner_seams", "seam");
optgroup->append_single_option_line("seam_gap","seam");
optgroup->append_single_option_line("seam_slope_type");
optgroup->append_single_option_line("seam_slope_start_height");
optgroup->append_single_option_line("seam_slope_entire_loop");
optgroup->append_single_option_line("seam_slope_min_length");
optgroup->append_single_option_line("seam_slope_steps");
optgroup->append_single_option_line("seam_slope_inner_walls");
optgroup->append_single_option_line("seam_slope_type", "seam#scarf-joint-seam");
optgroup->append_single_option_line("seam_slope_start_height", "seam#scarf-joint-seam");
optgroup->append_single_option_line("seam_slope_entire_loop", "seam#scarf-joint-seam");
optgroup->append_single_option_line("seam_slope_min_length", "seam#scarf-joint-seam");
optgroup->append_single_option_line("seam_slope_steps", "seam#scarf-joint-seam");
optgroup->append_single_option_line("seam_slope_inner_walls", "seam#scarf-joint-seam");
optgroup->append_single_option_line("role_based_wipe_speed","seam");
optgroup->append_single_option_line("wipe_speed", "seam");
optgroup->append_single_option_line("wipe_on_loops","seam");