amd/orcaslicer
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1

update WIKI

Browse source
This commit is contained in:
SoftFever 2024-03-04 20:26:50 +08:00
parent 27439ed547
commit 5cbbd053d1
5 changed files with 14 additions and 10 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

9
doc/Calibration.md
View file

@ -10,12 +10,13 @@
1. [Max Volumetric speed](#Max-Volumetric-speed) 1. [Max Volumetric speed](#Max-Volumetric-speed)
2. [VFA] 2. [VFA]
**NOTE**: After completing the calibration process, remember to create a new project in order to exit the calibration mode. **NOTE**: After completing the calibration process, remember to create a new project in order to exit the calibration mode.
**NOTE2**: @ItsDeidara has made a webpage to help with the calculation. Check it out if those equations give you a headache [here](https://orcalibrate.com/).
# Flow rate # Flow rate
##### *NOTE: For Bambulab X1/X1C users, make sure you do not select the 'Flow calibration' option.* ##### *NOTE: For Bambulab X1/X1C users, make sure you do not select the 'Flow calibration' option.*
![uncheck](https://user-images.githubusercontent.com/103989404/221345187-3c317a46-4d85-4221-99b9-adb5c7f48026.jpeg) ![uncheck](https://user-images.githubusercontent.com/103989404/221345187-3c317a46-4d85-4221-99b9-adb5c7f48026.jpeg)
---------------------------------------- ----------------------------------------
![flowrate](https://user-images.githubusercontent.com/103989404/210137579-3fd141ad-f2da-4542-a1fd-fc4b4d673908.gif) ![flowrate](./images/flow-calibration.gif)
Calibrating the flow rate involves a two-step process. Calibrating the flow rate involves a two-step process.
Steps Steps
1. Select the printer, filament, and process you would like to use for the test. 1. Select the printer, filament, and process you would like to use for the test.
@ -29,8 +30,8 @@ Steps
6. Perform the `Pass 2` calibration. This process is similar to `Pass 1`, but a new project with ten blocks will be generated. The flow rate modifiers for this project will range from `-9 to 0`. 6. Perform the `Pass 2` calibration. This process is similar to `Pass 1`, but a new project with ten blocks will be generated. The flow rate modifiers for this project will range from `-9 to 0`.
7. Repeat steps 4 and 5. In this case, if your previous flow ratio was 1.029 and you selected the block with a flow rate modifier of -6, the new value should be calculated as follows: `1.029x(100-6)/100 = 0.96726`. ** Remember ** to save the filament profile. 7. Repeat steps 4 and 5. In this case, if your previous flow ratio was 1.029 and you selected the block with a flow rate modifier of -6, the new value should be calculated as follows: `1.029x(100-6)/100 = 0.96726`. ** Remember ** to save the filament profile.
![pass2](https://user-images.githubusercontent.com/103989404/210139072-f2fa91a6-4e3b-4d2a-81f2-c50155e1ff6d.jpg) ![pass2](https://user-images.githubusercontent.com/103989404/210139072-f2fa91a6-4e3b-4d2a-81f2-c50155e1ff6d.jpg)
![-6](https://user-images.githubusercontent.com/103989404/210139131-ee224146-b242-4c1c-ac96-35ef0ca591f1.jpg) ![-6](https://user-images.githubusercontent.com/103989404/210139131-ee224146-b242-4c1c-ac96-35ef0ca591f1.jpg)
![image](https://user-images.githubusercontent.com/103989404/210139721-919be130-fbba-4e3a-aa58-8a563e8c7792.png) ![image](./images/flowcalibration_update_flowrate.jpg)
# Pressure Advance # Pressure Advance

3
doc/Seam.md
View file

@ -1,5 +1,8 @@
WIP... WIP...
### Scarf joint seam
WIP...
### Seam gap ### Seam gap
![image](https://user-images.githubusercontent.com/103989404/215331359-236874c9-ca91-4dd4-b969-3cefc70ebe1b.png) ![image](https://user-images.githubusercontent.com/103989404/215331359-236874c9-ca91-4dd4-b969-3cefc70ebe1b.png)

BIN
doc/images/flow-calibration.gif Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 4.4 MiB

BIN
doc/images/flowcalibration_update_flowrate.jpg Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 62 KiB

12
src/slic3r/GUI/Tab.cpp
View file

@ -1976,12 +1976,12 @@ void TabPrint::build()
optgroup->append_single_option_line("seam_position", "seam"); optgroup->append_single_option_line("seam_position", "seam");
optgroup->append_single_option_line("staggered_inner_seams", "seam"); optgroup->append_single_option_line("staggered_inner_seams", "seam");
optgroup->append_single_option_line("seam_gap","seam"); optgroup->append_single_option_line("seam_gap","seam");
optgroup->append_single_option_line("seam_slope_type"); optgroup->append_single_option_line("seam_slope_type", "seam#scarf-joint-seam");
optgroup->append_single_option_line("seam_slope_start_height"); optgroup->append_single_option_line("seam_slope_start_height", "seam#scarf-joint-seam");
optgroup->append_single_option_line("seam_slope_entire_loop"); optgroup->append_single_option_line("seam_slope_entire_loop", "seam#scarf-joint-seam");
optgroup->append_single_option_line("seam_slope_min_length"); optgroup->append_single_option_line("seam_slope_min_length", "seam#scarf-joint-seam");
optgroup->append_single_option_line("seam_slope_steps"); optgroup->append_single_option_line("seam_slope_steps", "seam#scarf-joint-seam");
optgroup->append_single_option_line("seam_slope_inner_walls"); optgroup->append_single_option_line("seam_slope_inner_walls", "seam#scarf-joint-seam");
optgroup->append_single_option_line("role_based_wipe_speed","seam"); optgroup->append_single_option_line("role_based_wipe_speed","seam");
optgroup->append_single_option_line("wipe_speed", "seam"); optgroup->append_single_option_line("wipe_speed", "seam");
optgroup->append_single_option_line("wipe_on_loops","seam"); optgroup->append_single_option_line("wipe_on_loops","seam");