diff --git a/BuildLinux.sh b/BuildLinux.sh
index 1a217c683..9b4709b6e 100755
--- a/BuildLinux.sh
+++ b/BuildLinux.sh
@@ -79,6 +79,11 @@ then
 fi
 
 DISTRIBUTION=$(awk -F= '/^ID=/ {print $2}' /etc/os-release)
+# treat ubuntu as debian
+if [ "${DISTRIBUTION}" == "ubuntu" ]
+then
+    DISTRIBUTION="debian"
+fi
 if [ ! -f ./linux.d/${DISTRIBUTION} ]
 then
     echo "Your distribution does not appear to be currently supported by these build scripts"
diff --git a/linux.d/ubuntu b/linux.d/debian
similarity index 100%
rename from linux.d/ubuntu
rename to linux.d/debian
diff --git a/resources/profiles/Creality/filament/Creality Generic PETG @K1-all.json b/resources/profiles/Creality/filament/Creality Generic PETG @K1-all.json
index 5b4f750c9..9528472e4 100644
--- a/resources/profiles/Creality/filament/Creality Generic PETG @K1-all.json	
+++ b/resources/profiles/Creality/filament/Creality Generic PETG @K1-all.json	
@@ -44,6 +44,9 @@
     "nozzle_temperature": [
         "250"
     ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
     "compatible_printers": [
         "Creality K1C 0.4 nozzle",
         "Creality K1C 0.6 nozzle",
diff --git a/resources/profiles/Creality/filament/Creality Generic PLA @K1-all.json b/resources/profiles/Creality/filament/Creality Generic PLA @K1-all.json
index 2d6ae3d26..50ed25372 100644
--- a/resources/profiles/Creality/filament/Creality Generic PLA @K1-all.json	
+++ b/resources/profiles/Creality/filament/Creality Generic PLA @K1-all.json	
@@ -35,6 +35,9 @@
     "textured_plate_temp_initial_layer": [
         "55"
     ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
     "compatible_printers": [
         "Creality K1C 0.4 nozzle",
         "Creality K1C 0.6 nozzle",
diff --git a/resources/profiles/Creality/filament/Creality Generic TPU @K1-all.json b/resources/profiles/Creality/filament/Creality Generic TPU @K1-all.json
index b3d572cc8..a19eec76e 100644
--- a/resources/profiles/Creality/filament/Creality Generic TPU @K1-all.json	
+++ b/resources/profiles/Creality/filament/Creality Generic TPU @K1-all.json	
@@ -29,6 +29,9 @@
     "slow_down_layer_time": [
         "5"
     ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
     "compatible_printers": [
         "Creality K1C 0.4 nozzle",
         "Creality K1C 0.6 nozzle",
diff --git a/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json
index 5683fdb62..707fb2504 100644
--- a/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json	
@@ -1,58 +1,133 @@
 {
-	"type": "machine",
-	"setting_id": "GM001",
-	"name": "Creality K1 (0.4 nozzle)",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_creality_common",
-	"printer_model": "Creality K1",
-	"gcode_flavor": "klipper",
-	"default_print_profile": "0.20mm Standard @Creality K1 (0.4 nozzle)",
-	"nozzle_diameter": ["0.4"],
-	"printer_variant": "0.4",
-	"printable_area": ["0x0", "220x0", "220x220", "0x220"],
-	"printable_height": "250",
-	"nozzle_type": "brass",
-	"auxiliary_fan": "1",
-	"support_multi_bed_types": "1",
-	"machine_max_acceleration_e": ["5000", "5000"],
-	"machine_max_acceleration_extruding": ["20000", "20000"],
-	"machine_max_acceleration_retracting": ["5000", "5000"],
-	"machine_max_acceleration_travel": ["9000", "9000"],
-	"machine_max_acceleration_x": ["20000", "20000"],
-	"machine_max_acceleration_y": ["20000", "20000"],
-	"machine_max_acceleration_z": ["500", "500"],
-	"machine_max_speed_e": ["100", "100"],
-	"machine_max_speed_x": ["800", "800"],
-	"machine_max_speed_y": ["800", "800"],
-	"machine_max_speed_z": ["20", "20"],
-	"machine_max_jerk_e": ["2.5", "2.5"],
-	"machine_max_jerk_x": ["12", "12"],
-	"machine_max_jerk_y": ["12", "12"],
-	"machine_max_jerk_z": ["2", "2"],
-	"max_layer_height": ["0.3"],
-	"min_layer_height": ["0.08"],
-	"printer_settings_id": "Creality",
-	"retraction_minimum_travel": ["2"],
-	"retract_before_wipe": ["70%"],
-	"retraction_length": ["0.6"],
-	"retract_length_toolchange": ["1"],
-	"retraction_speed": ["40"],
-	"deretraction_speed": ["40"],
-	"extruder_clearance_height_to_lid": "101",
-	"extruder_clearance_height_to_rod": "45",
-	"extruder_clearance_radius": "45",
-	"z_hop": ["0.2"],
-	"single_extruder_multi_material": "1",
-	"manual_filament_change": "1",
-	"change_filament_gcode": "PAUSE",
-	"machine_pause_gcode": "PAUSE",
-	"default_filament_profile": ["Creality HF Generic PLA"],
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
-	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0",
-	"thumbnails": [
-		"100x100",
-		"320x320"
-	]
-}
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K1 (0.4 nozzle)",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K1",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.20mm Standard @Creality K1 (0.4 nozzle)",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_variant": "0.4",
+    "printable_area": [
+        "0x0",
+        "220x0",
+        "220x220",
+        "0x220"
+    ],
+    "printable_height": "250",
+    "nozzle_type": "brass",
+    "auxiliary_fan": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.6"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.2"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality HF Generic PLA"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "100x100",
+        "320x320"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json b/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json
index c3080ab4d..f5b4464a8 100644
--- a/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json	
@@ -1,58 +1,133 @@
 {
-	"type": "machine",
-	"setting_id": "GM001",
-	"name": "Creality K1 (0.6 nozzle)",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_creality_common",
-	"printer_model": "Creality K1",
-	"gcode_flavor": "klipper",
-	"default_print_profile": "0.30mm Standard @Creality K1 (0.6 nozzle)",
-	"nozzle_diameter": ["0.6"],
-	"printer_variant": "0.6",
-	"printable_area": ["0x0", "220x0", "220x220", "0x220"],
-	"printable_height": "250",
-	"nozzle_type": "brass",
-	"auxiliary_fan": "1",
-	"support_multi_bed_types": "1",
-	"machine_max_acceleration_e": ["5000", "5000"],
-	"machine_max_acceleration_extruding": ["20000", "20000"],
-	"machine_max_acceleration_retracting": ["5000", "5000"],
-	"machine_max_acceleration_travel": ["9000", "9000"],
-	"machine_max_acceleration_x": ["20000", "20000"],
-	"machine_max_acceleration_y": ["20000", "20000"],
-	"machine_max_acceleration_z": ["500", "500"],
-	"machine_max_speed_e": ["100", "100"],
-	"machine_max_speed_x": ["800", "800"],
-	"machine_max_speed_y": ["800", "800"],
-	"machine_max_speed_z": ["20", "20"],
-	"machine_max_jerk_e": ["2.5", "2.5"],
-	"machine_max_jerk_x": ["12", "12"],
-	"machine_max_jerk_y": ["12", "12"],
-	"machine_max_jerk_z": ["2", "2"],
-	"max_layer_height": ["0.4"],
-	"min_layer_height": ["0.08"],
-	"printer_settings_id": "Creality",
-	"retraction_minimum_travel": ["2"],
-	"retract_before_wipe": ["70%"],
-	"retraction_length": ["0.5"],
-	"retract_length_toolchange": ["1"],
-	"retraction_speed": ["40"],
-	"deretraction_speed": ["40"],
-	"extruder_clearance_height_to_lid": "101",
-	"extruder_clearance_height_to_rod": "45",
-	"extruder_clearance_radius": "45",
-	"z_hop": ["0.2"],
-	"single_extruder_multi_material": "1",
-	"manual_filament_change": "1",
-	"change_filament_gcode": "PAUSE",
-	"machine_pause_gcode": "PAUSE",
-	"default_filament_profile": ["Creality HF Generic PLA"],
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
-	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0",
-	"thumbnails": [
-		"100x100",
-		"320x320"
-	]
-}
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K1 (0.6 nozzle)",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K1",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.30mm Standard @Creality K1 (0.6 nozzle)",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "printer_variant": "0.6",
+    "printable_area": [
+        "0x0",
+        "220x0",
+        "220x220",
+        "0x220"
+    ],
+    "printable_height": "250",
+    "nozzle_type": "brass",
+    "auxiliary_fan": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.4"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.2"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality HF Generic PLA"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "100x100",
+        "320x320"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json b/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json
index 61649c930..2c980a66a 100644
--- a/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json	
@@ -1,58 +1,133 @@
 {
-	"type": "machine",
-	"setting_id": "GM001",
-	"name": "Creality K1 (0.8 nozzle)",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_creality_common",
-	"printer_model": "Creality K1",
-	"gcode_flavor": "klipper",
-	"default_print_profile": "0.40mm Standard @Creality K1 (0.8 nozzle)",
-	"nozzle_diameter": ["0.8"],
-	"printer_variant": "0.8",
-	"printable_area": ["0x0", "220x0", "220x220", "0x220"],
-	"printable_height": "250",
-	"nozzle_type": "brass",
-	"auxiliary_fan": "1",
-	"support_multi_bed_types": "1",
-	"machine_max_acceleration_e": ["5000", "5000"],
-	"machine_max_acceleration_extruding": ["20000", "20000"],
-	"machine_max_acceleration_retracting": ["5000", "5000"],
-	"machine_max_acceleration_travel": ["9000", "9000"],
-	"machine_max_acceleration_x": ["20000", "20000"],
-	"machine_max_acceleration_y": ["20000", "20000"],
-	"machine_max_acceleration_z": ["500", "500"],
-	"machine_max_speed_e": ["100", "100"],
-	"machine_max_speed_x": ["800", "800"],
-	"machine_max_speed_y": ["800", "800"],
-	"machine_max_speed_z": ["20", "20"],
-	"machine_max_jerk_e": ["2.5", "2.5"],
-	"machine_max_jerk_x": ["12", "12"],
-	"machine_max_jerk_y": ["12", "12"],
-	"machine_max_jerk_z": ["2", "2"],
-	"max_layer_height": ["0.5"],
-	"min_layer_height": ["0.08"],
-	"printer_settings_id": "Creality",
-	"retraction_minimum_travel": ["2"],
-	"retract_before_wipe": ["70%"],
-	"retraction_length": ["0.5"],
-	"retract_length_toolchange": ["1"],
-	"retraction_speed": ["40"],
-	"deretraction_speed": ["40"],
-	"extruder_clearance_height_to_lid": "101",
-	"extruder_clearance_height_to_rod": "45",
-	"extruder_clearance_radius": "45",
-	"z_hop": ["0.2"],
-	"single_extruder_multi_material": "1",
-	"manual_filament_change": "1",
-	"change_filament_gcode": "PAUSE",
-	"machine_pause_gcode": "PAUSE",
-	"default_filament_profile": ["Creality HF Generic PLA"],
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
-	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0",
-	"thumbnails": [
-		"100x100",
-		"320x320"
-	]
-}
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K1 (0.8 nozzle)",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K1",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.40mm Standard @Creality K1 (0.8 nozzle)",
+    "nozzle_diameter": [
+        "0.8"
+    ],
+    "printer_variant": "0.8",
+    "printable_area": [
+        "0x0",
+        "220x0",
+        "220x220",
+        "0x220"
+    ],
+    "printable_height": "250",
+    "nozzle_type": "brass",
+    "auxiliary_fan": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.5"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.2"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality HF Generic PLA"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "100x100",
+        "320x320"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json b/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json
index 524131fb0..bb772a0bd 100644
--- a/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json	
@@ -1,59 +1,134 @@
 {
-	"type": "machine",
-	"setting_id": "GM001",
-	"name": "Creality K1 Max (0.4 nozzle)",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_creality_common",
-	"printer_model": "Creality K1 Max",
-	"gcode_flavor": "klipper",
-	"default_print_profile": "0.20mm Standard @Creality K1Max (0.4 nozzle)",
-	"nozzle_diameter": ["0.4"],
-	"printer_variant": "0.4",
-	"printable_area": ["0x0", "300x0", "300x300", "0x300"],
-	"printable_height": "300",
-	"nozzle_type": "hardened_steel",
-	"auxiliary_fan": "1",
-	"support_air_filtration": "1",
-	"support_multi_bed_types": "1",
-	"machine_max_acceleration_e": ["5000", "5000"],
-	"machine_max_acceleration_extruding": ["20000", "20000"],
-	"machine_max_acceleration_retracting": ["5000", "5000"],
-	"machine_max_acceleration_travel": ["9000", "9000"],
-	"machine_max_acceleration_x": ["20000", "20000"],
-	"machine_max_acceleration_y": ["20000", "20000"],
-	"machine_max_acceleration_z": ["500", "500"],
-	"machine_max_speed_e": ["100", "100"],
-	"machine_max_speed_x": ["800", "800"],
-	"machine_max_speed_y": ["800", "800"],
-	"machine_max_speed_z": ["20", "20"],
-	"machine_max_jerk_e": ["2.5", "2.5"],
-	"machine_max_jerk_x": ["12", "12"],
-	"machine_max_jerk_y": ["12", "12"],
-	"machine_max_jerk_z": ["2", "2"],
-	"max_layer_height": ["0.3"],
-	"min_layer_height": ["0.08"],
-	"printer_settings_id": "Creality",
-	"retraction_minimum_travel": ["2"],
-	"retract_before_wipe": ["70%"],
-	"retraction_length": ["0.6"],
-	"retract_length_toolchange": ["1"],
-	"retraction_speed": ["40"],
-	"deretraction_speed": ["40"],
-	"extruder_clearance_height_to_lid": "101",
-	"extruder_clearance_height_to_rod": "45",
-	"extruder_clearance_radius": "45",
-	"z_hop": ["0.2"],
-	"single_extruder_multi_material": "1",
-	"manual_filament_change": "1",
-	"change_filament_gcode": "PAUSE",
-	"machine_pause_gcode": "PAUSE",
-	"default_filament_profile": ["Creality HF Generic PLA"],
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
-	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0",
-	"thumbnails": [
-		"100x100",
-		"320x320"
-	]
-}
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K1 Max (0.4 nozzle)",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K1 Max",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.20mm Standard @Creality K1Max (0.4 nozzle)",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_variant": "0.4",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x300",
+        "0x300"
+    ],
+    "printable_height": "300",
+    "nozzle_type": "hardened_steel",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.6"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.2"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality HF Generic PLA"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "100x100",
+        "320x320"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json b/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json
index 21abf7ec8..d19a20ace 100644
--- a/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json	
@@ -1,59 +1,134 @@
 {
-	"type": "machine",
-	"setting_id": "GM001",
-	"name": "Creality K1 Max (0.6 nozzle)",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_creality_common",
-	"printer_model": "Creality K1 Max",
-	"gcode_flavor": "klipper",
-	"default_print_profile": "0.30mm Standard @Creality K1Max (0.6 nozzle)",
-	"nozzle_diameter": ["0.6"],
-	"printer_variant": "0.6",
-	"printable_area": ["0x0", "300x0", "300x300", "0x300"],
-	"printable_height": "300",
-	"nozzle_type": "hardened_steel",
-	"auxiliary_fan": "1",
-	"support_air_filtration": "1",
-	"support_multi_bed_types": "1",
-	"machine_max_acceleration_e": ["5000", "5000"],
-	"machine_max_acceleration_extruding": ["20000", "20000"],
-	"machine_max_acceleration_retracting": ["5000", "5000"],
-	"machine_max_acceleration_travel": ["9000", "9000"],
-	"machine_max_acceleration_x": ["20000", "20000"],
-	"machine_max_acceleration_y": ["20000", "20000"],
-	"machine_max_acceleration_z": ["500", "500"],
-	"machine_max_speed_e": ["100", "100"],
-	"machine_max_speed_x": ["800", "800"],
-	"machine_max_speed_y": ["800", "800"],
-	"machine_max_speed_z": ["20", "20"],
-	"machine_max_jerk_e": ["2.5", "2.5"],
-	"machine_max_jerk_x": ["12", "12"],
-	"machine_max_jerk_y": ["12", "12"],
-	"machine_max_jerk_z": ["2", "2"],
-	"max_layer_height": ["0.4"],
-	"min_layer_height": ["0.08"],
-	"printer_settings_id": "Creality",
-	"retraction_minimum_travel": ["2"],
-	"retract_before_wipe": ["70%"],
-	"retraction_length": ["0.5"],
-	"retract_length_toolchange": ["1"],
-	"retraction_speed": ["40"],
-	"deretraction_speed": ["40"],
-	"extruder_clearance_height_to_lid": "101",
-	"extruder_clearance_height_to_rod": "45",
-	"extruder_clearance_radius": "45",
-	"z_hop": ["0.2"],
-	"single_extruder_multi_material": "1",
-	"manual_filament_change": "1",
-	"change_filament_gcode": "PAUSE",
-	"machine_pause_gcode": "PAUSE",
-	"default_filament_profile": ["Creality HF Generic PLA"],
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
-	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0",
-	"thumbnails": [
-		"100x100",
-		"320x320"
-	]
-}
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K1 Max (0.6 nozzle)",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K1 Max",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.30mm Standard @Creality K1Max (0.6 nozzle)",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "printer_variant": "0.6",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x300",
+        "0x300"
+    ],
+    "printable_height": "300",
+    "nozzle_type": "hardened_steel",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "9000",
+        "9000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.4"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.2"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality HF Generic PLA"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "100x100",
+        "320x320"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json b/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json
index 8a65bf915..e31c18808 100644
--- a/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json	
@@ -1,59 +1,134 @@
 {
-	"type": "machine",
-	"setting_id": "GM001",
-	"name": "Creality K1 Max (0.8 nozzle)",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_creality_common",
-	"printer_model": "Creality K1 Max",
-	"gcode_flavor": "klipper",
-	"default_print_profile": "0.40mm Standard @Creality K1Max (0.8 nozzle)",
-	"nozzle_diameter": ["0.8"],
-	"printer_variant": "0.8",
-	"printable_area": ["0x0", "300x0", "300x300", "0x300"],
-	"printable_height": "300",
-	"nozzle_type": "hardened_steel",
-	"auxiliary_fan": "1",
-	"support_air_filtration": "1",
-	"support_multi_bed_types": "1",
-	"machine_max_acceleration_e": ["5000", "5000"],
-	"machine_max_acceleration_extruding": ["20000", "20000"],
-	"machine_max_acceleration_retracting": ["5000", "5000"],
-	"machine_max_acceleration_travel": ["20000", "20000"],
-	"machine_max_acceleration_x": ["20000", "20000"],
-	"machine_max_acceleration_y": ["20000", "20000"],
-	"machine_max_acceleration_z": ["500", "500"],
-	"machine_max_speed_e": ["100", "100"],
-	"machine_max_speed_x": ["800", "800"],
-	"machine_max_speed_y": ["800", "800"],
-	"machine_max_speed_z": ["20", "20"],
-	"machine_max_jerk_e": ["2.5", "2.5"],
-	"machine_max_jerk_x": ["12", "12"],
-	"machine_max_jerk_y": ["12", "12"],
-	"machine_max_jerk_z": ["2", "2"],
-	"max_layer_height": ["0.5"],
-	"min_layer_height": ["0.08"],
-	"printer_settings_id": "Creality",
-	"retraction_minimum_travel": ["2"],
-	"retract_before_wipe": ["70%"],
-	"retraction_length": ["0.5"],
-	"retract_length_toolchange": ["1"],
-	"retraction_speed": ["40"],
-	"deretraction_speed": ["40"],
-	"extruder_clearance_height_to_lid": "101",
-	"extruder_clearance_height_to_rod": "45",
-	"extruder_clearance_radius": "45",
-	"z_hop": ["0.2"],
-	"single_extruder_multi_material": "1",
-	"manual_filament_change": "1",
-	"change_filament_gcode": "PAUSE",
-	"machine_pause_gcode": "PAUSE",
-	"default_filament_profile": ["Creality HF Generic PLA"],
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
-	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0",
-	"thumbnails": [
-		"100x100",
-		"320x320"
-	]
-}
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "Creality K1 Max (0.8 nozzle)",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_creality_common",
+    "printer_model": "Creality K1 Max",
+    "gcode_flavor": "klipper",
+    "default_print_profile": "0.40mm Standard @Creality K1Max (0.8 nozzle)",
+    "nozzle_diameter": [
+        "0.8"
+    ],
+    "printer_variant": "0.8",
+    "printable_area": [
+        "0x0",
+        "300x0",
+        "300x300",
+        "0x300"
+    ],
+    "printable_height": "300",
+    "nozzle_type": "hardened_steel",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "100",
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_y": [
+        "800",
+        "800"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "20"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_y": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_z": [
+        "2",
+        "2"
+    ],
+    "max_layer_height": [
+        "0.5"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printer_settings_id": "Creality",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "40"
+    ],
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_clearance_height_to_lid": "101",
+    "extruder_clearance_height_to_rod": "45",
+    "extruder_clearance_radius": "45",
+    "z_hop": [
+        "0.2"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
+    "default_filament_profile": [
+        "Creality HF Generic PLA"
+    ],
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "END_PRINT",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "100x100",
+        "320x320"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality K1 Max.json b/resources/profiles/Creality/machine/Creality K1 Max.json
index b74f86b5f..10df2e7b5 100644
--- a/resources/profiles/Creality/machine/Creality K1 Max.json	
+++ b/resources/profiles/Creality/machine/Creality K1 Max.json	
@@ -9,4 +9,4 @@
     "bed_texture": "creality_k1max_buildplate_texture.png",
     "hotend_model": "",
     "default_materials": "Creality Generic ABS;Creality Generic ASA;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG;Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality K1.json b/resources/profiles/Creality/machine/Creality K1.json
index dedfc1603..73e10d77a 100644
--- a/resources/profiles/Creality/machine/Creality K1.json	
+++ b/resources/profiles/Creality/machine/Creality K1.json	
@@ -9,4 +9,4 @@
     "bed_texture": "creality_k1_buildplate_texture.png",
     "hotend_model": "",
     "default_materials": "Creality Generic ABS;Creality Generic ASA;Creality Generic PC @K1-all;Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PETG;Creality Generic TPU"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json
index ff0a88777..d4deca8aa 100644
--- a/resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json	
@@ -21,8 +21,8 @@
     "printable_height": "250",
     "nozzle_type": "hardened_steel",
     "auxiliary_fan": "1",
-	"support_air_filtration": "1",
-	"support_multi_bed_types": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
     "machine_max_acceleration_e": [
         "5000",
         "5000"
@@ -94,7 +94,7 @@
         "2"
     ],
     "retract_before_wipe": [
-        "70%"
+        "0%"
     ],
     "retraction_length": [
         "0.6"
@@ -114,6 +114,9 @@
     "z_hop": [
         "0.2"
     ],
+    "wipe_distance": [
+        "2"
+    ],
     "single_extruder_multi_material": "1",
     "manual_filament_change": "1",
     "change_filament_gcode": "PAUSE",
diff --git a/resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json
index 1cb4effc6..46b2ae946 100644
--- a/resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json	
@@ -21,8 +21,8 @@
     "printable_height": "250",
     "nozzle_type": "hardened_steel",
     "auxiliary_fan": "1",
-	"support_air_filtration": "1",
-	"support_multi_bed_types": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
     "machine_max_acceleration_e": [
         "5000",
         "5000"
@@ -94,7 +94,7 @@
         "2"
     ],
     "retract_before_wipe": [
-        "70%"
+        "0%"
     ],
     "retraction_length": [
         "0.5"
@@ -114,6 +114,9 @@
     "z_hop": [
         "0.2"
     ],
+    "wipe_distance": [
+        "2"
+    ],
     "single_extruder_multi_material": "1",
     "manual_filament_change": "1",
     "change_filament_gcode": "PAUSE",
diff --git a/resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json
index 3b41fbd72..6788e0c5e 100644
--- a/resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json	
@@ -21,8 +21,8 @@
     "printable_height": "250",
     "nozzle_type": "hardened_steel",
     "auxiliary_fan": "1",
-	"support_air_filtration": "1",
-	"support_multi_bed_types": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
     "machine_max_acceleration_e": [
         "5000",
         "5000"
@@ -94,7 +94,7 @@
         "2"
     ],
     "retract_before_wipe": [
-        "70%"
+        "0%"
     ],
     "retraction_length": [
         "0.5"
@@ -114,6 +114,9 @@
     "z_hop": [
         "0.2"
     ],
+    "wipe_distance": [
+        "2"
+    ],
     "single_extruder_multi_material": "1",
     "manual_filament_change": "1",
     "change_filament_gcode": "PAUSE",
diff --git a/resources/profiles/Creality/machine/Creality K1C.json b/resources/profiles/Creality/machine/Creality K1C.json
index 673856d38..610866a1c 100644
--- a/resources/profiles/Creality/machine/Creality K1C.json	
+++ b/resources/profiles/Creality/machine/Creality K1C.json	
@@ -9,4 +9,4 @@
     "bed_texture": "creality_k1c_buildplate_texture.png",
     "hotend_model": "",
     "default_materials": "Creality Generic ABS @K1-all;Creality Generic ASA @K1-all;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG @K1-all;Creality Generic PLA @K1-all;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU @K1-all"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json
index a37823ac3..f292c68bb 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json	
@@ -12,8 +12,8 @@
     "bottom_shell_layers": "3",
     "bottom_shell_thickness": "0",
     "bridge_flow": "1",
-    "bridge_speed": "25",
-    "internal_bridge_speed": "70",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
     "brim_width": "5",
     "brim_object_gap": "0.1",
     "compatible_printers": [
@@ -54,9 +54,9 @@
     "reduce_infill_retraction": "1",
     "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "50",
-    "overhang_3_4_speed": "30",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
     "inner_wall_line_width": "0.45",
@@ -65,6 +65,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json
index f6c496173..f36ef1fb7 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json	
@@ -12,8 +12,8 @@
     "bottom_shell_layers": "3",
     "bottom_shell_thickness": "0",
     "bridge_flow": "1",
-    "bridge_speed": "25",
-    "internal_bridge_speed": "70",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
     "brim_width": "5",
     "brim_object_gap": "0.1",
     "compatible_printers": [
@@ -54,9 +54,9 @@
     "reduce_infill_retraction": "1",
     "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "50",
-    "overhang_3_4_speed": "30",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
     "inner_wall_line_width": "0.45",
@@ -65,6 +65,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json b/resources/profiles/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json
index 1d6328dda..976197fc3 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json	
@@ -12,8 +12,8 @@
     "bottom_shell_layers": "5",
     "bottom_shell_thickness": "0",
     "bridge_flow": "1",
-    "bridge_speed": "25",
-    "internal_bridge_speed": "70",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
     "brim_width": "5",
     "brim_object_gap": "0.1",
     "compatible_printers_condition": "",
@@ -51,9 +51,9 @@
     "reduce_infill_retraction": "1",
     "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "50",
-    "overhang_3_4_speed": "30",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
     "inner_wall_line_width": "0.45",
@@ -62,6 +62,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json
index 63ea8d7a5..95bcfd2ee 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json	
@@ -12,8 +12,8 @@
     "bottom_shell_layers": "3",
     "bottom_shell_thickness": "0",
     "bridge_flow": "1",
-    "bridge_speed": "25",
-    "internal_bridge_speed" : "70",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
     "brim_width": "5",
     "brim_object_gap": "0.1",
     "compatible_printers": [
@@ -54,9 +54,9 @@
     "reduce_infill_retraction": "1",
     "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "50",
-    "overhang_3_4_speed": "30",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
     "inner_wall_line_width": "0.45",
@@ -65,6 +65,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -113,4 +116,4 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json
index e9c190d94..404f77212 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json	
@@ -12,8 +12,8 @@
     "bottom_shell_layers": "3",
     "bottom_shell_thickness": "0",
     "bridge_flow": "1",
-    "bridge_speed": "25",
-    "internal_bridge_speed": "70",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
     "brim_width": "5",
     "brim_object_gap": "0.1",
     "compatible_printers": [
@@ -54,9 +54,9 @@
     "reduce_infill_retraction": "1",
     "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "50",
-    "overhang_3_4_speed": "30",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
     "inner_wall_line_width": "0.45",
@@ -65,6 +65,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json
index d3a62ef79..43be3e0f1 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json	
@@ -1,19 +1,19 @@
 {
-	"type": "process",
-	"setting_id": "GP004",
-	"name": "0.16mm Optimal @Creality K1Max (0.4 nozzle)",
-	"from": "system",
-	"inherits": "fdm_process_common_klipper",
-	"instantiation": "true",
-	"adaptive_layer_height": "0",
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality K1Max (0.4 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
     "reduce_crossing_wall": "0",
     "max_travel_detour_distance": "0",
     "bottom_surface_pattern": "monotonic",
     "bottom_shell_layers": "3",
     "bottom_shell_thickness": "0",
     "bridge_flow": "1",
-    "bridge_speed": "25",
-    "internal_bridge_speed" : "70",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
     "brim_width": "5",
     "brim_object_gap": "0.1",
     "compatible_printers_condition": "",
@@ -51,9 +51,9 @@
     "reduce_infill_retraction": "1",
     "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "50",
-    "overhang_3_4_speed": "30",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
     "inner_wall_line_width": "0.45",
@@ -62,6 +62,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -85,7 +88,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-	"support_expansion":	"0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -110,7 +113,7 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
-	"compatible_printers": [
-		"Creality K1 Max (0.4 nozzle)"
-	]
-}
+    "compatible_printers": [
+        "Creality K1 Max (0.4 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json
index eeb0412b1..89e199b06 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json	
@@ -12,8 +12,8 @@
     "bottom_shell_layers": "3",
     "bottom_shell_thickness": "0",
     "bridge_flow": "1",
-    "bridge_speed": "25",
-    "internal_bridge_speed" : "70",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
     "brim_width": "5",
     "brim_object_gap": "0.1",
     "compatible_printers": [
@@ -65,6 +65,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -88,7 +91,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-    "support_expansion":    "0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -113,4 +116,4 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json
index 1f6accc5c..9497a842e 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json	
@@ -12,8 +12,8 @@
     "bottom_shell_layers": "3",
     "bottom_shell_thickness": "0",
     "bridge_flow": "1",
-    "bridge_speed": "25",
-    "internal_bridge_speed": "70",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
     "brim_width": "5",
     "brim_object_gap": "0.1",
     "compatible_printers": [
@@ -65,6 +65,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json
index 1a78a1647..6b4ebe477 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json	
@@ -1,19 +1,19 @@
 {
-	"type": "process",
-	"setting_id": "GP004",
-	"name": "0.20mm Standard @Creality K1Max (0.4 nozzle)",
-	"from": "system",
-	"inherits": "fdm_process_common_klipper",
-	"instantiation": "true",
-	"adaptive_layer_height": "0",
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @Creality K1Max (0.4 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
     "reduce_crossing_wall": "0",
     "max_travel_detour_distance": "0",
     "bottom_surface_pattern": "monotonic",
     "bottom_shell_layers": "3",
     "bottom_shell_thickness": "0",
     "bridge_flow": "1",
-    "bridge_speed": "25",
-    "internal_bridge_speed" : "70",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
     "brim_width": "5",
     "brim_object_gap": "0.1",
     "compatible_printers_condition": "",
@@ -62,6 +62,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -85,7 +88,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-	"support_expansion":	"0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -110,7 +113,7 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
-	"compatible_printers": [
-		"Creality K1 Max (0.4 nozzle)"
-	]
-}
+    "compatible_printers": [
+        "Creality K1 Max (0.4 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json
index b72764cba..b84835786 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json	
@@ -12,8 +12,8 @@
     "bottom_shell_layers": "3",
     "bottom_shell_thickness": "0",
     "bridge_flow": "1",
-    "bridge_speed": "25",
-    "internal_bridge_speed" : "70",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
     "brim_width": "5",
     "brim_object_gap": "0.1",
     "compatible_printers": [
@@ -65,6 +65,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -88,7 +91,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-    "support_expansion":    "0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -113,4 +116,4 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json
index cd29aeac4..4c862e272 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json	
@@ -12,8 +12,8 @@
     "bottom_shell_layers": "3",
     "bottom_shell_thickness": "0",
     "bridge_flow": "1",
-    "bridge_speed": "25",
-    "internal_bridge_speed": "70",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
     "brim_width": "5",
     "brim_object_gap": "0.1",
     "compatible_printers": [
@@ -65,6 +65,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json
index c285e9abd..7375e35ee 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json	
@@ -1,19 +1,19 @@
 {
-	"type": "process",
-	"setting_id": "GP004",
-	"name": "0.24mm Draft @Creality K1Max (0.4 nozzle)",
-	"from": "system",
-	"inherits": "fdm_process_common_klipper",
-	"instantiation": "true",
-	"adaptive_layer_height": "0",
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality K1Max (0.4 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
     "reduce_crossing_wall": "0",
     "max_travel_detour_distance": "0",
     "bottom_surface_pattern": "monotonic",
     "bottom_shell_layers": "3",
     "bottom_shell_thickness": "0",
     "bridge_flow": "1",
-    "bridge_speed": "25",
-    "internal_bridge_speed" : "70",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
     "brim_width": "5",
     "brim_object_gap": "0.1",
     "compatible_printers_condition": "",
@@ -62,6 +62,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -85,7 +88,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-	"support_expansion":	"0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -110,7 +113,7 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
-	"compatible_printers": [
-		"Creality K1 Max (0.4 nozzle)"
-	]
-}
+    "compatible_printers": [
+        "Creality K1 Max (0.4 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json
index 021ffef87..38ec7ecd8 100644
--- a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json	
+++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json	
@@ -1,11 +1,11 @@
 {
-	"type": "process",
-	"setting_id": "GP004",
-	"name": "0.24mm Optimal @Creality K1 (0.6 nozzle)",
-	"from": "system",
-	"inherits": "fdm_process_common_klipper",
-	"instantiation": "true",
-	"adaptive_layer_height": "0",
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Optimal @Creality K1 (0.6 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
     "reduce_crossing_wall": "0",
     "max_travel_detour_distance": "0",
     "bottom_surface_pattern": "monotonic",
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -84,7 +87,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-	"support_expansion":	"0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -109,7 +112,7 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
-	"compatible_printers": [
-		"Creality K1 (0.6 nozzle)"
-	]
-}
+    "compatible_printers": [
+        "Creality K1 (0.6 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json
index b9a5cfbb6..b0d52c4fa 100644
--- a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json	
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json
index 659e4b978..71523cc4d 100644
--- a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json	
+++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json	
@@ -1,11 +1,11 @@
 {
-	"type": "process",
-	"setting_id": "GP004",
-	"name": "0.24mm Optimal @Creality K1Max (0.6 nozzle)",
-	"from": "system",
-	"inherits": "fdm_process_common_klipper",
-	"instantiation": "true",
-	"adaptive_layer_height": "0",
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Optimal @Creality K1Max (0.6 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
     "reduce_crossing_wall": "0",
     "max_travel_detour_distance": "0",
     "bottom_surface_pattern": "monotonic",
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -84,7 +87,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-	"support_expansion":	"0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -109,7 +112,7 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
-	"compatible_printers": [
-		"Creality K1 Max (0.6 nozzle)"
-	]
-}
+    "compatible_printers": [
+        "Creality K1 Max (0.6 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json b/resources/profiles/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json
index 904ff17eb..c9a69fb99 100644
--- a/resources/profiles/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json	
+++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json	
@@ -1,11 +1,11 @@
 {
-	"type": "process",
-	"setting_id": "GP004",
-	"name": "0.30mm Standard @Creality K1 (0.6 nozzle)",
-	"from": "system",
-	"inherits": "fdm_process_common_klipper",
-	"instantiation": "true",
-	"adaptive_layer_height": "0",
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.30mm Standard @Creality K1 (0.6 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
     "reduce_crossing_wall": "0",
     "max_travel_detour_distance": "0",
     "bottom_surface_pattern": "monotonic",
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -84,7 +87,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-	"support_expansion":	"0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -109,7 +112,7 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
-	"compatible_printers": [
-		"Creality K1 (0.6 nozzle)"
-	]
-}
+    "compatible_printers": [
+        "Creality K1 (0.6 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json
index 4bd1b2400..d56645b25 100644
--- a/resources/profiles/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json	
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json b/resources/profiles/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json
index 8cd8ff9a2..3280057fd 100644
--- a/resources/profiles/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json	
+++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json	
@@ -1,11 +1,11 @@
 {
-	"type": "process",
-	"setting_id": "GP004",
-	"name": "0.30mm Standard @Creality K1Max (0.6 nozzle)",
-	"from": "system",
-	"inherits": "fdm_process_common_klipper",
-	"instantiation": "true",
-	"adaptive_layer_height": "0",
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.30mm Standard @Creality K1Max (0.6 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
     "reduce_crossing_wall": "0",
     "max_travel_detour_distance": "0",
     "bottom_surface_pattern": "monotonic",
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -84,7 +87,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-	"support_expansion":	"0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -109,7 +112,7 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
-	"compatible_printers": [
-		"Creality K1 Max (0.6 nozzle)"
-	]
-}
+    "compatible_printers": [
+        "Creality K1 Max (0.6 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json
index c9bc775be..9ee4f69e9 100644
--- a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json	
+++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json	
@@ -1,11 +1,11 @@
 {
-	"type": "process",
-	"setting_id": "GP004",
-	"name": "0.32mm Optimal @Creality K1 (0.8 nozzle)",
-	"from": "system",
-	"inherits": "fdm_process_common_klipper",
-	"instantiation": "true",
-	"adaptive_layer_height": "0",
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.32mm Optimal @Creality K1 (0.8 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
     "reduce_crossing_wall": "0",
     "max_travel_detour_distance": "0",
     "bottom_surface_pattern": "monotonic",
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -84,7 +87,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-	"support_expansion":	"0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -109,7 +112,7 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
-	"compatible_printers": [
-		"Creality K1 (0.8 nozzle)"
-	]
-}
+    "compatible_printers": [
+        "Creality K1 (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json
index b5ecf953c..b5645bf4e 100644
--- a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json	
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json
index 548aac9fa..0e7533f7d 100644
--- a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json	
+++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json	
@@ -1,11 +1,11 @@
 {
-	"type": "process",
-	"setting_id": "GP004",
-	"name": "0.32mm Optimal @Creality K1Max (0.8 nozzle)",
-	"from": "system",
-	"inherits": "fdm_process_common_klipper",
-	"instantiation": "true",
-	"adaptive_layer_height": "0",
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.32mm Optimal @Creality K1Max (0.8 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
     "reduce_crossing_wall": "0",
     "max_travel_detour_distance": "0",
     "bottom_surface_pattern": "monotonic",
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -84,7 +87,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-	"support_expansion":	"0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -109,7 +112,7 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
-	"compatible_printers": [
-		"Creality K1 Max (0.8 nozzle)"
-	]
-}
+    "compatible_printers": [
+        "Creality K1 Max (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json b/resources/profiles/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json
index 826e8349c..fadb5b0f5 100644
--- a/resources/profiles/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json	
+++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json	
@@ -1,11 +1,11 @@
 {
-	"type": "process",
-	"setting_id": "GP004",
-	"name": "0.36mm Draft @Creality K1 (0.6 nozzle)",
-	"from": "system",
-	"inherits": "fdm_process_common_klipper",
-	"instantiation": "true",
-	"adaptive_layer_height": "0",
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.36mm Draft @Creality K1 (0.6 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
     "reduce_crossing_wall": "0",
     "max_travel_detour_distance": "0",
     "bottom_surface_pattern": "monotonic",
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -84,7 +87,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-	"support_expansion":	"0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -109,7 +112,7 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
-	"compatible_printers": [
-		"Creality K1 (0.6 nozzle)"
-	]
-}
+    "compatible_printers": [
+        "Creality K1 (0.6 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json
index c312c12ca..3111169c9 100644
--- a/resources/profiles/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json	
+++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json	
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json b/resources/profiles/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json
index 261b31086..0d9a8d151 100644
--- a/resources/profiles/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json	
+++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json	
@@ -1,11 +1,11 @@
 {
-	"type": "process",
-	"setting_id": "GP004",
-	"name": "0.36mm Draft @Creality K1Max (0.6 nozzle)",
-	"from": "system",
-	"inherits": "fdm_process_common_klipper",
-	"instantiation": "true",
-	"adaptive_layer_height": "0",
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.36mm Draft @Creality K1Max (0.6 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
     "reduce_crossing_wall": "0",
     "max_travel_detour_distance": "0",
     "bottom_surface_pattern": "monotonic",
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -84,7 +87,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-	"support_expansion":	"0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -109,7 +112,7 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
-	"compatible_printers": [
-		"Creality K1 Max (0.6 nozzle)"
-	]
-}
+    "compatible_printers": [
+        "Creality K1 Max (0.6 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json b/resources/profiles/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json
index f246ca94b..96e481e7b 100644
--- a/resources/profiles/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json	
+++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json	
@@ -1,11 +1,11 @@
 {
-	"type": "process",
-	"setting_id": "GP004",
-	"name": "0.40mm Standard @Creality K1 (0.8 nozzle)",
-	"from": "system",
-	"inherits": "fdm_process_common_klipper",
-	"instantiation": "true",
-	"adaptive_layer_height": "0",
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.40mm Standard @Creality K1 (0.8 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
     "reduce_crossing_wall": "0",
     "max_travel_detour_distance": "0",
     "bottom_surface_pattern": "monotonic",
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -84,7 +87,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-	"support_expansion":	"0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -109,7 +112,7 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
-	"compatible_printers": [
-		"Creality K1 (0.8 nozzle)"
-	]
-}
+    "compatible_printers": [
+        "Creality K1 (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json
index e956dadee..d84aea05e 100644
--- a/resources/profiles/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json	
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json b/resources/profiles/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json
index 3d526219a..6eaf18e02 100644
--- a/resources/profiles/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json	
+++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json	
@@ -1,11 +1,11 @@
 {
-	"type": "process",
-	"setting_id": "GP004",
-	"name": "0.40mm Standard @Creality K1Max (0.8 nozzle)",
-	"from": "system",
-	"inherits": "fdm_process_common_klipper",
-	"instantiation": "true",
-	"adaptive_layer_height": "0",
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.40mm Standard @Creality K1Max (0.8 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
     "reduce_crossing_wall": "0",
     "max_travel_detour_distance": "0",
     "bottom_surface_pattern": "monotonic",
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -84,7 +87,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-	"support_expansion":	"0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -109,7 +112,7 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
-	"compatible_printers": [
-		"Creality K1 Max (0.8 nozzle)"
-	]
-}
+    "compatible_printers": [
+        "Creality K1 Max (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json b/resources/profiles/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json
index cf3145d3a..28f226f4c 100644
--- a/resources/profiles/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json	
+++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json	
@@ -1,11 +1,11 @@
 {
-	"type": "process",
-	"setting_id": "GP004",
-	"name": "0.48mm Draft @Creality K1 (0.8 nozzle)",
-	"from": "system",
-	"inherits": "fdm_process_common_klipper",
-	"instantiation": "true",
-	"adaptive_layer_height": "0",
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.48mm Draft @Creality K1 (0.8 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
     "reduce_crossing_wall": "0",
     "max_travel_detour_distance": "0",
     "bottom_surface_pattern": "monotonic",
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -84,7 +87,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-	"support_expansion":	"0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -109,7 +112,7 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
-	"compatible_printers": [
-		"Creality K1 (0.8 nozzle)"
-	]
-}
+    "compatible_printers": [
+        "Creality K1 (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json b/resources/profiles/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json
index 4e275a212..95839ac90 100644
--- a/resources/profiles/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json	
+++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json	
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json b/resources/profiles/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json
index ba460aef6..58fc8ffcc 100644
--- a/resources/profiles/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json	
+++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json	
@@ -1,11 +1,11 @@
 {
-	"type": "process",
-	"setting_id": "GP004",
-	"name": "0.48mm Draft @Creality K1Max (0.8 nozzle)",
-	"from": "system",
-	"inherits": "fdm_process_common_klipper",
-	"instantiation": "true",
-	"adaptive_layer_height": "0",
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.48mm Draft @Creality K1Max (0.8 nozzle)",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
     "reduce_crossing_wall": "0",
     "max_travel_detour_distance": "0",
     "bottom_surface_pattern": "monotonic",
@@ -61,6 +61,9 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -84,7 +87,7 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-	"support_expansion":	"0",
+    "support_expansion": "0",
     "support_interface_speed": "80",
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
@@ -109,7 +112,7 @@
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
-	"compatible_printers": [
-		"Creality K1 Max (0.8 nozzle)"
-	]
-}
+    "compatible_printers": [
+        "Creality K1 Max (0.8 nozzle)"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Flashforge.json b/resources/profiles/Flashforge.json
index 852015703..b58dbefe0 100644
--- a/resources/profiles/Flashforge.json
+++ b/resources/profiles/Flashforge.json
@@ -56,6 +56,22 @@
       "sub_path": "process/0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle.json"
     },
 	{
+      "name": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
+      "sub_path": "process/0.12mm Standard @Flashforge AD5M 0.25 Nozzle.json"
+	},
+	{
+      "name": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
+      "sub_path": "process/0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle.json"
+	},
+	{
+      "name": "0.40mm Standard @Flashforge AD5M 0.8 Nozzle",
+      "sub_path": "process/0.40mm Standard @Flashforge AD5M 0.8 Nozzle.json"
+	},
+	{
+      "name": "0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle",
+      "sub_path": "process/0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle.json"
+	},
+	{
       "name": "0.20mm Standard @Flashforge AD3 0.4 Nozzle",
       "sub_path": "process/0.20mm Standard @Flashforge AD3 0.4 Nozzle.json"
     },
@@ -101,14 +117,26 @@
       "name": "Flashforge Generic ABS",
       "sub_path": "filament/Flashforge Generic ABS.json"
     },
+	{
+      "name": "Flashforge ABS @FF AD5M 0.25 Nozzle",
+      "sub_path": "filament/Flashforge ABS @FF AD5M 0.25 Nozzle.json"
+	},
     {
       "name": "Flashforge Generic PETG",
       "sub_path": "filament/Flashforge Generic PETG.json"
     },
+	{
+      "name": "Flashforge PETG @FF AD5M 0.25 Nozzle",
+      "sub_path": "filament/Flashforge PETG @FF AD5M 0.25 Nozzle.json"
+	},
     {
       "name": "Flashforge Generic PLA",
       "sub_path": "filament/Flashforge Generic PLA.json"
     },
+	{
+      "name": "Flashforge PLA @FF AD5M 0.25 Nozzle",
+      "sub_path": "filament/Flashforge PLA @FF AD5M 0.25 Nozzle.json"
+	},
     {
       "name": "Flashforge Generic PLA-CF10",
       "sub_path": "filament/Flashforge Generic PLA-CF10.json"
@@ -117,14 +145,26 @@
       "name": "Flashforge Generic PLA-Silk",
       "sub_path": "filament/Flashforge Generic PLA-Silk.json"
     },
+	{
+      "name": "Flashforge PLA-SILK @FF AD5M 0.25 Nozzle",
+      "sub_path": "filament/Flashforge PLA-SILK @FF AD5M 0.25 Nozzle.json"
+	},
     {
       "name": "Flashforge Generic HS PLA",
       "sub_path": "filament/Flashforge Generic HS PLA.json"
     },
+	{
+      "name": "Flashforge HS PLA @FF AD5M 0.25 Nozzle",
+      "sub_path": "filament/Flashforge HS PLA @FF AD5M 0.25 Nozzle.json"
+	},
     {
       "name": "Flashforge Generic ASA",
       "sub_path": "filament/Flashforge Generic ASA.json"
     },
+	{
+      "name": "Flashforge ASA @FF AD5M 0.25 Nozzle",
+      "sub_path": "filament/Flashforge ASA @FF AD5M 0.25 Nozzle.json"
+	},
     {
       "name": "Flashforge Generic PETG-CF10",
       "sub_path": "filament/Flashforge Generic PETG-CF10.json"
@@ -214,6 +254,14 @@
     {
       "name": "fdm_flashforge_common",
       "sub_path": "machine/fdm_flashforge_common.json"
+    },
+	{
+      "name": "fdm_adventurer5m_common",
+      "sub_path": "machine/fdm_adventurer5m_common.json"
+    },
+	{
+      "name": "Flashforge Adventurer 5M 0.25 Nozzle",
+      "sub_path": "machine/Flashforge Adventurer 5M 0.25 Nozzle.json"
     },
     {
       "name": "Flashforge Adventurer 5M 0.4 Nozzle",
@@ -222,6 +270,14 @@
     {
       "name": "Flashforge Adventurer 5M 0.6 Nozzle",
       "sub_path": "machine/Flashforge Adventurer 5M 0.6 Nozzle.json"
+    },
+	{
+      "name": "Flashforge Adventurer 5M 0.8 Nozzle",
+      "sub_path": "machine/Flashforge Adventurer 5M 0.8 Nozzle.json"
+    },
+	{
+      "name": "Flashforge Adventurer 5M Pro 0.25 Nozzle",
+      "sub_path": "machine/Flashforge Adventurer 5M Pro 0.25 Nozzle.json"
     },
     {
       "name": "Flashforge Adventurer 5M Pro 0.4 Nozzle",
@@ -230,6 +286,10 @@
     {
       "name": "Flashforge Adventurer 5M Pro 0.6 Nozzle",
       "sub_path": "machine/Flashforge Adventurer 5M Pro 0.6 Nozzle.json"
+    },
+	{
+      "name": "Flashforge Adventurer 5M Pro 0.8 Nozzle",
+      "sub_path": "machine/Flashforge Adventurer 5M Pro 0.8 Nozzle.json"
     },
 	{
       "name": "fdm_flashforge_common",
diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS @FF AD5M 0.25 Nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS @FF AD5M 0.25 Nozzle.json
new file mode 100644
index 000000000..44387098e
--- /dev/null
+++ b/resources/profiles/Flashforge/filament/Flashforge ABS @FF AD5M 0.25 Nozzle.json	
@@ -0,0 +1,32 @@
+{
+    "type": "filament",
+    "name": "Flashforge ABS @FF AD5M 0.25 Nozzle",
+    "inherits": "Flashforge Generic ABS",
+    "from": "system",
+    "setting_id": "GFSA04_02",
+    "instantiation": "true",
+    "compatible_printers": [
+      "Flashforge Adventurer 5M 0.25 Nozzle",
+      "Flashforge Adventurer 5M Pro 0.25 Nozzle"
+    ],
+    "filament_id": "GFB99",
+    "filament_settings_id": [
+        "Flashforge ABS @FF AD5M 0.25 Nozzle"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "filament_cost": [
+        "40"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "pressure_advance": [
+        "0.1"
+    ],
+    "version": "1.8.0.0"
+}
diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA @FF AD5M 0.25 Nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA @FF AD5M 0.25 Nozzle.json
new file mode 100644
index 000000000..1faf1a055
--- /dev/null
+++ b/resources/profiles/Flashforge/filament/Flashforge ASA @FF AD5M 0.25 Nozzle.json	
@@ -0,0 +1,35 @@
+{
+    "type": "filament",
+    "name": "Flashforge ASA @FF AD5M 0.25 Nozzle",
+    "inherits": "Flashforge Generic ASA",
+    "from": "system",
+    "setting_id": "GFSA04_05",
+    "instantiation": "true",
+    "compatible_printers": [
+      "Flashforge Adventurer 5M 0.25 Nozzle",
+      "Flashforge Adventurer 5M Pro 0.25 Nozzle"
+    ],
+    "filament_id": "GFL99",
+    "filament_settings_id": [
+        "Flashforge ASA @FF AD5M 0.25 Nozzle"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "filament_cost": [
+        "40"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n;right_extruder_material: ASA\n"
+    ],
+    "pressure_advance": [
+        "0.1"
+    ],
+    "version": "1.8.0.0"
+}
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic ABS @G3U.json b/resources/profiles/Flashforge/filament/Flashforge Generic ABS @G3U.json
index 1055037bb..acb764bee 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic ABS @G3U.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic ABS @G3U.json	
@@ -20,8 +20,6 @@
         "2"
     ],
   "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.4 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
     "Flashforge Guider 3 Ultra 0.4 Nozzle"
   ],
     "compatible_printers_condition": "",
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic ABS.json b/resources/profiles/Flashforge/filament/Flashforge Generic ABS.json
index f038a2148..d0560d5e8 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic ABS.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic ABS.json	
@@ -50,6 +50,7 @@
   ],
   "compatible_printers": [
     "Flashforge Adventurer 5M Pro 0.4 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle"
+    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle"
   ]
 }
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic ASA @G3U.json b/resources/profiles/Flashforge/filament/Flashforge Generic ASA @G3U.json
index 21c8408a8..457a13c2f 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic ASA @G3U.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic ASA @G3U.json	
@@ -20,8 +20,6 @@
         "2"
     ],
   "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.4 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
     "Flashforge Guider 3 Ultra 0.4 Nozzle"
   ],
     "compatible_printers_condition": "",
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic ASA.json b/resources/profiles/Flashforge/filament/Flashforge Generic ASA.json
index 2b5abb54a..5fe7a2172 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic ASA.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic ASA.json	
@@ -17,7 +17,9 @@
     "2"
   ],
   "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.4 Nozzle"
+    "Flashforge Adventurer 5M Pro 0.4 Nozzle",
+    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+    "Flashforge Adventurer 5M Pro 0.8 Nozzle"	
   ],
   "compatible_printers_condition": "",
   "compatible_prints": [],
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic HIPS.json b/resources/profiles/Flashforge/filament/Flashforge Generic HIPS.json
index 8dd83f0a4..aa5c61337 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic HIPS.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic HIPS.json	
@@ -20,8 +20,12 @@
         "2"
     ],
   "compatible_printers": [
+    "Flashforge Adventurer 5M 0.4 Nozzle",
+    "Flashforge Adventurer 5M 0.6 Nozzle",
+	"Flashforge Adventurer 5M 0.8 Nozzle",
     "Flashforge Adventurer 5M Pro 0.4 Nozzle",
     "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle",
     "Flashforge Guider 3 Ultra 0.4 Nozzle"
   ],
     "compatible_printers_condition": "",
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic HS PLA.json b/resources/profiles/Flashforge/filament/Flashforge Generic HS PLA.json
index 07658bcd9..e9c3659a6 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic HS PLA.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic HS PLA.json	
@@ -17,9 +17,11 @@
   ],
   "compatible_printers": [
     "Flashforge Adventurer 5M 0.4 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.4 Nozzle",
     "Flashforge Adventurer 5M 0.6 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle"
+	"Flashforge Adventurer 5M 0.8 Nozzle",
+    "Flashforge Adventurer 5M Pro 0.4 Nozzle",
+    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle"
   ],
   "compatible_printers_condition": "",
   "compatible_prints": [],
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic PETG @G3U.json b/resources/profiles/Flashforge/filament/Flashforge Generic PETG @G3U.json
index 808fe5983..38bacfca7 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic PETG @G3U.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic PETG @G3U.json	
@@ -20,10 +20,6 @@
         "1"
     ],
   "compatible_printers": [
-    "Flashforge Adventurer 5M 0.4 Nozzle",
-    "Flashforge Adventurer 5M 0.6 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.4 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
     "Flashforge Guider 3 Ultra 0.4 Nozzle"
   ],
     "compatible_printers_condition": "",
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic PETG-CF @G3U.json b/resources/profiles/Flashforge/filament/Flashforge Generic PETG-CF @G3U.json
index 74f50d8bd..29774632d 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic PETG-CF @G3U.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic PETG-CF @G3U.json	
@@ -20,10 +20,6 @@
         "1"
     ],
   "compatible_printers": [
-    "Flashforge Adventurer 5M 0.4 Nozzle",
-    "Flashforge Adventurer 5M 0.6 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.4 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
     "Flashforge Guider 3 Ultra 0.4 Nozzle"
   ],
     "compatible_printers_condition": "",
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic PETG-CF10.json b/resources/profiles/Flashforge/filament/Flashforge Generic PETG-CF10.json
index 257c6edad..0ae33101b 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic PETG-CF10.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic PETG-CF10.json	
@@ -18,9 +18,11 @@
   ],
   "compatible_printers": [
     "Flashforge Adventurer 5M 0.4 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.4 Nozzle",
     "Flashforge Adventurer 5M 0.6 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle"
+	"Flashforge Adventurer 5M 0.8 Nozzle",
+    "Flashforge Adventurer 5M Pro 0.4 Nozzle",
+    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle"
   ],
   "compatible_printers_condition": "",
   "compatible_prints": [],
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic PETG.json b/resources/profiles/Flashforge/filament/Flashforge Generic PETG.json
index 3c68f52cb..643b4c10c 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic PETG.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic PETG.json	
@@ -84,7 +84,9 @@
   "compatible_printers": [
     "Flashforge Adventurer 5M 0.4 Nozzle",
     "Flashforge Adventurer 5M 0.6 Nozzle",
+	"Flashforge Adventurer 5M 0.8 Nozzle",
     "Flashforge Adventurer 5M Pro 0.4 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle"
+    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle"
   ]
 }
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic PLA @G3U.json b/resources/profiles/Flashforge/filament/Flashforge Generic PLA @G3U.json
index 40ab738ac..a20515286 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic PLA @G3U.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic PLA @G3U.json	
@@ -20,10 +20,6 @@
         "1"
     ],
   "compatible_printers": [
-    "Flashforge Adventurer 5M 0.4 Nozzle",
-    "Flashforge Adventurer 5M 0.6 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.4 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
     "Flashforge Guider 3 Ultra 0.4 Nozzle"
   ],
     "compatible_printers_condition": "",
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic PLA-CF @G3U.json b/resources/profiles/Flashforge/filament/Flashforge Generic PLA-CF @G3U.json
index 074f4671e..bb851c86f 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic PLA-CF @G3U.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic PLA-CF @G3U.json	
@@ -20,10 +20,6 @@
         "1"
     ],
   "compatible_printers": [
-    "Flashforge Adventurer 5M 0.4 Nozzle",
-    "Flashforge Adventurer 5M 0.6 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.4 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
     "Flashforge Guider 3 Ultra 0.4 Nozzle"
   ],
     "compatible_printers_condition": "",
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic PLA-CF10.json b/resources/profiles/Flashforge/filament/Flashforge Generic PLA-CF10.json
index d48b9bbe9..9889e78ce 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic PLA-CF10.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic PLA-CF10.json	
@@ -20,9 +20,11 @@
   ],
   "compatible_printers": [
     "Flashforge Adventurer 5M 0.4 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.4 Nozzle",
     "Flashforge Adventurer 5M 0.6 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle"
+	"Flashforge Adventurer 5M 0.8 Nozzle",
+    "Flashforge Adventurer 5M Pro 0.4 Nozzle",
+    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle"
   ],
   "compatible_printers_condition": "",
   "compatible_prints": [],
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic PLA-Silk.json b/resources/profiles/Flashforge/filament/Flashforge Generic PLA-Silk.json
index 340a685a1..2536d54da 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic PLA-Silk.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic PLA-Silk.json	
@@ -60,7 +60,9 @@
   "compatible_printers": [
     "Flashforge Adventurer 5M 0.4 Nozzle",
     "Flashforge Adventurer 5M 0.6 Nozzle",
+	"Flashforge Adventurer 5M 0.8 Nozzle",
     "Flashforge Adventurer 5M Pro 0.4 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle"
+    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle"
   ]
 }
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic PLA.json b/resources/profiles/Flashforge/filament/Flashforge Generic PLA.json
index 1f91f1294..1eb9c62f5 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic PLA.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic PLA.json	
@@ -60,7 +60,9 @@
   "compatible_printers": [
     "Flashforge Adventurer 5M 0.4 Nozzle",
     "Flashforge Adventurer 5M 0.6 Nozzle",
+	"Flashforge Adventurer 5M 0.8 Nozzle",
     "Flashforge Adventurer 5M Pro 0.4 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle"
+    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle"
   ]
 }
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic PVA.json b/resources/profiles/Flashforge/filament/Flashforge Generic PVA.json
index bc2961109..6e74e7bc9 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic PVA.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic PVA.json	
@@ -22,8 +22,10 @@
   "compatible_printers": [
     "Flashforge Adventurer 5M 0.4 Nozzle",
     "Flashforge Adventurer 5M 0.6 Nozzle",
+	"Flashforge Adventurer 5M 0.8 Nozzle",
     "Flashforge Adventurer 5M Pro 0.4 Nozzle",
     "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle",
     "Flashforge Guider 3 Ultra 0.4 Nozzle"
   ],
     "compatible_printers_condition": "",
diff --git a/resources/profiles/Flashforge/filament/Flashforge Generic TPU.json b/resources/profiles/Flashforge/filament/Flashforge Generic TPU.json
index 268e9c66b..0639e20d0 100644
--- a/resources/profiles/Flashforge/filament/Flashforge Generic TPU.json	
+++ b/resources/profiles/Flashforge/filament/Flashforge Generic TPU.json	
@@ -19,8 +19,10 @@
   "compatible_printers": [
     "Flashforge Adventurer 5M 0.4 Nozzle",
     "Flashforge Adventurer 5M 0.6 Nozzle",
+	"Flashforge Adventurer 5M 0.8 Nozzle",
     "Flashforge Adventurer 5M Pro 0.4 Nozzle",
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle"
+    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle"
   ],
   "compatible_printers_condition": "",
   "compatible_prints": [],
diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5M 0.25 Nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5M 0.25 Nozzle.json
new file mode 100644
index 000000000..553b5f4be
--- /dev/null
+++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5M 0.25 Nozzle.json	
@@ -0,0 +1,50 @@
+{
+    "type": "filament",
+    "name": "Flashforge HS PLA @FF AD5M 0.25 Nozzle",
+    "inherits": "Flashforge Generic HS PLA",
+    "from": "system",
+    "setting_id": "GFSA04_09",
+    "instantiation": "true",
+    "compatible_printers": [
+      "Flashforge Adventurer 5M 0.25 Nozzle",
+      "Flashforge Adventurer 5M Pro 0.25 Nozzle"
+    ],
+    "filament_id": "GFL99",
+    "filament_settings_id": [
+        "Flashforge HS PLA @FF AD5M 0.25 Nozzle"
+    ],
+    "activate_air_filtration": [
+        "1"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n;right_extruder_material: HS PLA\n"
+    ],
+    "hot_plate_temp": [
+        "45"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "50"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.1"
+    ],
+    "slow_down_min_speed": [
+        "15"
+    ],
+    "version": "1.8.0.0"
+}
diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG @FF AD5M 0.25 Nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG @FF AD5M 0.25 Nozzle.json
new file mode 100644
index 000000000..0ebd69f10
--- /dev/null
+++ b/resources/profiles/Flashforge/filament/Flashforge PETG @FF AD5M 0.25 Nozzle.json	
@@ -0,0 +1,29 @@
+{
+    "type": "filament",
+    "name": "Flashforge PETG @FF AD5M 0.25 Nozzle",
+    "inherits": "Flashforge Generic PETG",
+    "from": "system",
+    "setting_id": "GFSA04_12",
+    "instantiation": "true",
+    "compatible_printers": [
+      "Flashforge Adventurer 5M 0.25 Nozzle",
+      "Flashforge Adventurer 5M Pro 0.25 Nozzle"
+    ],
+    "filament_id": "GFG99",
+    "filament_settings_id": [
+        "Flashforge PETG @FF AD5M 0.25 Nozzle"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "filament_max_volumetric_speed": [
+        "1.5"
+    ],
+    "pressure_advance": [
+        "0.1"
+    ],
+    "slow_down_min_speed": [
+        "15"
+    ],
+    "version": "1.8.0.0"
+}
diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA @FF AD5M 0.25 Nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA @FF AD5M 0.25 Nozzle.json
new file mode 100644
index 000000000..e3e8d5e3a
--- /dev/null
+++ b/resources/profiles/Flashforge/filament/Flashforge PLA @FF AD5M 0.25 Nozzle.json	
@@ -0,0 +1,49 @@
+{
+    "type": "filament",
+    "name": "Flashforge PLA @FF AD5M 0.25 Nozzle",
+    "inherits": "Flashforge Generic PLA",
+    "from": "system",
+    "setting_id": "GFSA04_19",
+    "instantiation": "true",
+    "compatible_printers": [
+      "Flashforge Adventurer 5M 0.25 Nozzle",
+      "Flashforge Adventurer 5M Pro 0.25 Nozzle"
+    ],
+    "filament_settings_id": [
+        "Flashforge PLA @FF AD5M 0.25 Nozzle"
+    ],
+    "activate_air_filtration": [
+        "1"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "2.8"
+    ],
+    "hot_plate_temp": [
+        "45"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "50"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "pressure_advance": [
+        "0.1"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "slow_down_min_speed": [
+        "15"
+    ],
+    "version": "1.8.0.0"
+}
diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-SILK @FF AD5M 0.25 Nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA-SILK @FF AD5M 0.25 Nozzle.json
new file mode 100644
index 000000000..41122b34a
--- /dev/null
+++ b/resources/profiles/Flashforge/filament/Flashforge PLA-SILK @FF AD5M 0.25 Nozzle.json	
@@ -0,0 +1,53 @@
+{
+    "type": "filament",
+    "name": "Flashforge PLA-SILK @FF AD5M 0.25 Nozzle",
+    "inherits": "Flashforge Generic PLA-Silk",
+    "from": "system",
+    "setting_id": "GFSA04_25",
+    "instantiation": "true",
+    "compatible_printers": [
+      "Flashforge Adventurer 5M 0.25 Nozzle",
+      "Flashforge Adventurer 5M Pro 0.25 Nozzle"
+    ],
+    "filament_id": "GFL99",
+    "filament_settings_id": [
+        "Flashforge PLA-SILK @FF AD5M 0.25 Nozzle"
+    ],
+    "activate_air_filtration": [
+        "1"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "2.8"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n;right_extruder_material: PLA-Silk\n"
+    ],
+    "hot_plate_temp": [
+        "45"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "50"
+    ],
+    "nozzle_temperature": [
+        "217"
+    ],
+    "pressure_advance": [
+        "0.1"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "slow_down_min_speed": [
+        "15"
+    ],
+    "version": "1.8.0.0"
+}
diff --git a/resources/profiles/Flashforge/filament/FusRock Generic NexPA-CF25.json b/resources/profiles/Flashforge/filament/FusRock Generic NexPA-CF25.json
index 88259d7a3..44df1f319 100644
--- a/resources/profiles/Flashforge/filament/FusRock Generic NexPA-CF25.json	
+++ b/resources/profiles/Flashforge/filament/FusRock Generic NexPA-CF25.json	
@@ -22,8 +22,10 @@
   "compatible_printers": [
     "Flashforge Adventurer 5M 0.4 Nozzle",
     "Flashforge Adventurer 5M 0.6 Nozzle",
+	"Flashforge Adventurer 5M 0.8 Nozzle",
     "Flashforge Adventurer 5M Pro 0.4 Nozzle",
     "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle",
     "Flashforge Guider 3 Ultra 0.4 Nozzle"
   ],
   "compatible_printers_condition": "",
diff --git a/resources/profiles/Flashforge/filament/FusRock Generic PAHT-CF.json b/resources/profiles/Flashforge/filament/FusRock Generic PAHT-CF.json
index a58a757e6..ceeb2e7db 100644
--- a/resources/profiles/Flashforge/filament/FusRock Generic PAHT-CF.json	
+++ b/resources/profiles/Flashforge/filament/FusRock Generic PAHT-CF.json	
@@ -22,8 +22,10 @@
   "compatible_printers": [
     "Flashforge Adventurer 5M 0.4 Nozzle",
     "Flashforge Adventurer 5M 0.6 Nozzle",
+	"Flashforge Adventurer 5M 0.8 Nozzle",
     "Flashforge Adventurer 5M Pro 0.4 Nozzle",
     "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle",
     "Flashforge Guider 3 Ultra 0.4 Nozzle"
   ],
   "compatible_printers_condition": "",
diff --git a/resources/profiles/Flashforge/filament/FusRock Generic PET-CF.json b/resources/profiles/Flashforge/filament/FusRock Generic PET-CF.json
index f7d520689..7239d7d22 100644
--- a/resources/profiles/Flashforge/filament/FusRock Generic PET-CF.json	
+++ b/resources/profiles/Flashforge/filament/FusRock Generic PET-CF.json	
@@ -22,8 +22,10 @@
   "compatible_printers": [
     "Flashforge Adventurer 5M 0.4 Nozzle",
     "Flashforge Adventurer 5M 0.6 Nozzle",
+	"Flashforge Adventurer 5M 0.8 Nozzle",
     "Flashforge Adventurer 5M Pro 0.4 Nozzle",
     "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle",
     "Flashforge Guider 3 Ultra 0.4 Nozzle"
   ],
   "compatible_printers_condition": "",
diff --git a/resources/profiles/Flashforge/filament/FusRock Generic S-Multi.json b/resources/profiles/Flashforge/filament/FusRock Generic S-Multi.json
index afedac099..d63badb6f 100644
--- a/resources/profiles/Flashforge/filament/FusRock Generic S-Multi.json	
+++ b/resources/profiles/Flashforge/filament/FusRock Generic S-Multi.json	
@@ -22,8 +22,10 @@
   "compatible_printers": [
     "Flashforge Adventurer 5M 0.4 Nozzle",
     "Flashforge Adventurer 5M 0.6 Nozzle",
+	"Flashforge Adventurer 5M 0.8 Nozzle",
     "Flashforge Adventurer 5M Pro 0.4 Nozzle",
     "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle",
     "Flashforge Guider 3 Ultra 0.4 Nozzle"
   ],
   "compatible_printers_condition": "",
diff --git a/resources/profiles/Flashforge/filament/FusRock Generic S-PAHT.json b/resources/profiles/Flashforge/filament/FusRock Generic S-PAHT.json
index b897d2ed4..74b7f88dd 100644
--- a/resources/profiles/Flashforge/filament/FusRock Generic S-PAHT.json	
+++ b/resources/profiles/Flashforge/filament/FusRock Generic S-PAHT.json	
@@ -22,8 +22,10 @@
   "compatible_printers": [
     "Flashforge Adventurer 5M 0.4 Nozzle",
     "Flashforge Adventurer 5M 0.6 Nozzle",
+	"Flashforge Adventurer 5M 0.8 Nozzle",
     "Flashforge Adventurer 5M Pro 0.4 Nozzle",
     "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle",
     "Flashforge Guider 3 Ultra 0.4 Nozzle"
   ],
   "compatible_printers_condition": "",
diff --git a/resources/profiles/Flashforge/filament/Polymaker Generic CoPA.json b/resources/profiles/Flashforge/filament/Polymaker Generic CoPA.json
index 4c9993997..fff9c3e72 100644
--- a/resources/profiles/Flashforge/filament/Polymaker Generic CoPA.json	
+++ b/resources/profiles/Flashforge/filament/Polymaker Generic CoPA.json	
@@ -22,8 +22,10 @@
   "compatible_printers": [
     "Flashforge Adventurer 5M 0.4 Nozzle",
     "Flashforge Adventurer 5M 0.6 Nozzle",
+	"Flashforge Adventurer 5M 0.8 Nozzle",
     "Flashforge Adventurer 5M Pro 0.4 Nozzle",
     "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle",
     "Flashforge Guider 3 Ultra 0.4 Nozzle"
   ],
     "compatible_printers_condition": "",
diff --git a/resources/profiles/Flashforge/filament/Polymaker Generic S1.json b/resources/profiles/Flashforge/filament/Polymaker Generic S1.json
index d41b46f78..e6ae0afcf 100644
--- a/resources/profiles/Flashforge/filament/Polymaker Generic S1.json	
+++ b/resources/profiles/Flashforge/filament/Polymaker Generic S1.json	
@@ -22,8 +22,10 @@
   "compatible_printers": [
     "Flashforge Adventurer 5M 0.4 Nozzle",
     "Flashforge Adventurer 5M 0.6 Nozzle",
+	"Flashforge Adventurer 5M 0.8 Nozzle",
     "Flashforge Adventurer 5M Pro 0.4 Nozzle",
     "Flashforge Adventurer 5M Pro 0.6 Nozzle",
+	"Flashforge Adventurer 5M Pro 0.8 Nozzle",
     "Flashforge Guider 3 Ultra 0.4 Nozzle"
   ],
     "compatible_printers_condition": "",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M 0.25 Nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M 0.25 Nozzle.json
new file mode 100644
index 000000000..02d4534ca
--- /dev/null
+++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M 0.25 Nozzle.json	
@@ -0,0 +1,18 @@
+{
+	"type": "machine",
+	"setting_id": "GM006",
+	"name": "Flashforge Adventurer 5M 0.25 Nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_adventurer5m_common",
+	"printer_model": "Flashforge Adventurer 5M",
+	"default_print_profile": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
+	"nozzle_diameter": [ "0.25" ],
+	"printer_variant": "0.25",
+	"max_layer_height": [ "0.14" ],
+	"min_layer_height": [ "0.08" ],
+    "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG1 Z5 F6000\nG90 E0\nM83\nG1 E-1 F600\nG1 E8 F300\nG1 X85 Y110 Z0.2 F1200\nG1 X-110 E15 F2400\nG1 Y0 E4 F2400\nG1 X-109.6 F2400\nG1 Y110 E5 F2400\nG92 E0",
+	"retraction_length": [ "1" ],
+	"z_hop": [ "0.3" ],
+	"nozzle_type": "stainless_steel"
+}
\ No newline at end of file
diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M 0.4 Nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M 0.4 Nozzle.json
index d8504dde9..5d8d6652d 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M 0.4 Nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M 0.4 Nozzle.json	
@@ -4,62 +4,13 @@
 	"name": "Flashforge Adventurer 5M 0.4 Nozzle",
 	"from": "system",
 	"instantiation": "true",
-	"inherits": "fdm_flashforge_common",
+	"inherits": "fdm_adventurer5m_common",
 	"printer_model": "Flashforge Adventurer 5M",
-	"gcode_flavor": "klipper",
-	"default_print_profile": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
+	"default_print_profile": "0.20mm Standard @Flashforge AD5M 0.4 Nozzle",
 	"nozzle_diameter": [ "0.4" ],
 	"printer_variant": "0.4",
-	"printable_area": [
-		"-110x-110",
-		"110x-110",
-		"110x110",
-		"-110x110"
-	],
-	"printable_height": "220",
-	"auxiliary_fan": "1",
-	"machine_max_acceleration_e": [ "5000", "5000" ],
-	"machine_max_acceleration_extruding": [ "20000", "20000" ],
-	"machine_max_acceleration_retracting": [ "5000", "5000" ],
-	"machine_max_acceleration_travel": [ "20000", "20000" ],
-	"machine_max_acceleration_x": [ "20000", "20000" ],
-	"machine_max_acceleration_y": [ "20000", "20000" ],
-	"machine_max_acceleration_z": [ "500", "500" ],
-	"machine_max_speed_e": [ "30", "30" ],
-	"machine_max_speed_x": [ "600", "600" ],
-	"machine_max_speed_y": [ "600", "600" ],
-	"machine_max_speed_z": [ "20", "20" ],
-	"machine_max_jerk_e": [ "2.5", "2.5" ],
-	"machine_max_jerk_x": [ "9", "9" ],
-	"machine_max_jerk_y": [ "9", "9" ],
-	"machine_max_jerk_z": [ "3", "3" ],
 	"max_layer_height": [ "0.28" ],
 	"min_layer_height": [ "0.08" ],
-	"printer_settings_id": "Flashforge",
-	"retraction_minimum_travel": [ "1" ],
-	"retract_before_wipe": [ "100%" ],
 	"retraction_length": [ "0.8" ],
-	"retract_length_toolchange": [ "2" ],
-	"deretraction_speed": [ "35" ],
-	"z_hop": [ "0.4" ],
-	"single_extruder_multi_material": "0",
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M25",
-	"default_filament_profile": [ "Flashforge Generic PLA" ],
-	"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z5 F6000\nG1 E-1.5 F800\nG1 X110 Y-110 F6000\nG1 E2 F800\nG1 Y-110 X55 Z0.25 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG1 Y-110 X55 Z0.45 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG92 E0",
-	"machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 ; turn off temperature",
-	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
-	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
-	"scan_first_layer": "0",
-	"thumbnails": [
-		"140x110"
-	],
-	"use_relative_e_distances": "1",
-	"z_hop_types": "Auto Lift",
-	"retraction_speed": [ "35" ],
-	"wipe_distance": "2",
-	"extruder_clearance_radius": [ "76" ],
-	"extruder_clearance_height_to_rod": [ "27" ],
-	"extruder_clearance_height_to_lid": [ "150" ],
 	"nozzle_type": "stainless_steel"
 }
diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M 0.6 Nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M 0.6 Nozzle.json
index ebd4b9d7f..34694b32b 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M 0.6 Nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M 0.6 Nozzle.json	
@@ -4,63 +4,14 @@
 	"name": "Flashforge Adventurer 5M 0.6 Nozzle",
 	"from": "system",
 	"instantiation": "true",
-	"inherits": "fdm_flashforge_common",
+	"inherits": "fdm_adventurer5m_common",
 	"printer_model": "Flashforge Adventurer 5M",
-	"gcode_flavor": "klipper",
-	"default_print_profile": "0.20mm Standard @Flashforge AD5M 0.6 Nozzle",
+	"default_print_profile": "0.30mm Standard @Flashforge AD5M 0.6 Nozzle",
 	"nozzle_diameter": [ "0.6" ],
 	"printer_variant": "0.6",
-	"printable_area": [
-		"-110x-110",
-		"110x-110",
-		"110x110",
-		"-110x110"
-	],
-	"printable_height": "220",
-	"auxiliary_fan": "1",
-	"machine_max_acceleration_e": [ "5000", "5000" ],
-	"machine_max_acceleration_extruding": [ "20000", "20000" ],
-	"machine_max_acceleration_retracting": [ "5000", "5000" ],
-	"machine_max_acceleration_travel": [ "20000", "20000" ],
-	"machine_max_acceleration_x": [ "20000", "20000" ],
-	"machine_max_acceleration_y": [ "20000", "20000" ],
-	"machine_max_acceleration_z": [ "500", "500" ],
-	"machine_max_speed_e": [ "30", "30" ],
-	"machine_max_speed_x": [ "600", "600" ],
-	"machine_max_speed_y": [ "600", "600" ],
-	"machine_max_speed_z": [ "20", "20" ],
-	"machine_max_jerk_e": [ "2.5", "2.5" ],
-	"machine_max_jerk_x": [ "9", "9" ],
-	"machine_max_jerk_y": [ "9", "9" ],
-	"machine_max_jerk_z": [ "3", "3" ],
 	"max_layer_height": [ "0.4" ],
 	"min_layer_height": [ "0.15" ],
-	"printer_settings_id": "Flashforge",
-	"retraction_minimum_travel": [ "1" ],
-	"retract_before_wipe": [ "100%" ],
 	"retraction_length": [ "1.2" ],
-	"retract_length_toolchange": [ "2" ],
-	"deretraction_speed": [ "35" ],
-	"z_hop": [ "0.4" ],
-	"single_extruder_multi_material": "0",
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M25",
-	"default_filament_profile": [ "Flashforge Generic PLA" ],
-	"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z5 F6000\nG1 E-1.5 F800\nG1 X110 Y-110 F6000\nG1 E2 F800\nG1 Y-110 X55 Z0.25 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG1 Y-110 X55 Z0.45 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG92 E0",
-	"machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 ; turn off temperature",
-	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
-	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
-	"scan_first_layer": "0",
-	"thumbnails": [
-		"140x110"
-	],
-	"use_relative_e_distances": "1",
-	"z_hop_types": "Auto Lift",
-	"retraction_speed": [ "35" ],
-	"wipe_distance": "2",
-	"extruder_clearance_radius": [ "76" ],
-	"extruder_clearance_height_to_rod": [ "27" ],
-	"extruder_clearance_height_to_lid": [ "150" ],
 	"nozzle_type": "hardened_steel"
 
 
diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M 0.8 Nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M 0.8 Nozzle.json
new file mode 100644
index 000000000..2eef780d8
--- /dev/null
+++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M 0.8 Nozzle.json	
@@ -0,0 +1,18 @@
+{
+	"type": "machine",
+	"setting_id": "GM005",
+	"name": "Flashforge Adventurer 5M 0.8 Nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_adventurer5m_common",
+	"printer_model": "Flashforge Adventurer 5M",
+	"default_print_profile": "0.40mm Standard @Flashforge AD5M 0.8 Nozzle",
+	"nozzle_diameter": [ "0.8" ],
+	"printer_variant": "0.8",
+	"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG1 Z5 F6000\nG1 E-1.5 F600\nG1 E12 F800\nG1 X85 Y110 Z0.3 F1200\nG1 X-110 E30 F2400\nG1 Y0 E8 F2400\nG1 X-109.6 F2400\nG1 Y110 E10 F2400\nG92 E0",
+	"max_layer_height": [ "0.56" ],
+	"min_layer_height": [ "0.15" ],
+	"retraction_length": [ "1.5" ],
+	"nozzle_type": "hardened_steel",
+	"z_hop": ["0"]
+}
diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro 0.25 Nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro 0.25 Nozzle.json
new file mode 100644
index 000000000..021520222
--- /dev/null
+++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro 0.25 Nozzle.json	
@@ -0,0 +1,18 @@
+{
+	"type": "machine",
+	"setting_id": "GM010",
+	"name": "Flashforge Adventurer 5M Pro 0.25 Nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_adventurer5m_common",
+	"printer_model": "Flashforge Adventurer 5M Pro",
+	"default_print_profile": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
+	"nozzle_diameter": [ "0.25" ],
+	"printer_variant": "0.25",
+	"max_layer_height": [ "0.14" ],
+	"min_layer_height": [ "0.08" ],
+    "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG1 Z5 F6000\nG90 E0\nM83\nG1 E-1 F600\nG1 E8 F300\nG1 X85 Y110 Z0.2 F1200\nG1 X-110 E15 F2400\nG1 Y0 E4 F2400\nG1 X-109.6 F2400\nG1 Y110 E5 F2400\nG92 E0",
+	"retraction_length": [ "1" ],
+	"z_hop": [ "0.3" ],
+	"nozzle_type": "stainless_steel"
+}
\ No newline at end of file
diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro 0.4 Nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro 0.4 Nozzle.json
index 4d8d58dcd..eaad7c2df 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro 0.4 Nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro 0.4 Nozzle.json	
@@ -4,63 +4,13 @@
 	"name": "Flashforge Adventurer 5M Pro 0.4 Nozzle",
 	"from": "system",
 	"instantiation": "true",
-	"inherits": "fdm_flashforge_common",
+	"inherits": "fdm_adventurer5m_common",
 	"printer_model": "Flashforge Adventurer 5M Pro",
-	"gcode_flavor": "klipper",
 	"default_print_profile": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
 	"nozzle_diameter": [ "0.4" ],
 	"printer_variant": "0.4",
-	"printable_area": [
-		"-110x-110",
-		"110x-110",
-		"110x110",
-		"-110x110"
-	],
-	"printable_height": "220",
-	"auxiliary_fan": "1",
-	"machine_max_acceleration_e": [ "5000", "5000" ],
-	"machine_max_acceleration_extruding": [ "20000", "20000" ],
-	"machine_max_acceleration_retracting": [ "5000", "5000" ],
-	"machine_max_acceleration_travel": [ "20000", "20000" ],
-	"machine_max_acceleration_x": [ "20000", "20000" ],
-	"machine_max_acceleration_y": [ "20000", "20000" ],
-	"machine_max_acceleration_z": [ "500", "500" ],
-	"machine_max_speed_e": [ "30", "30" ],
-	"machine_max_speed_x": [ "600", "600" ],
-	"machine_max_speed_y": [ "600", "600" ],
-	"machine_max_speed_z": [ "20", "20" ],
-	"machine_max_jerk_e": [ "2.5", "2.5" ],
-	"machine_max_jerk_x": [ "9", "9" ],
-	"machine_max_jerk_y": [ "9", "9" ],
-	"machine_max_jerk_z": [ "3", "3" ],
 	"max_layer_height": [ "0.28" ],
 	"min_layer_height": [ "0.08" ],
-	"printer_settings_id": "Flashforge",
-	"retraction_minimum_travel": [ "1" ],
-	"retract_before_wipe": [ "100%" ],
 	"retraction_length": [ "0.8" ],
-	"retract_length_toolchange": [ "2" ],
-	"deretraction_speed": [ "35" ],
-	"z_hop": [ "0.4" ],
-	"single_extruder_multi_material": "0",
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M25",
-	"default_filament_profile": [ "Flashforge Generic PLA" ],
-	"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z5 F6000\nG1 E-1.5 F800\nG1 X110 Y-110 F6000\nG1 E2 F800\nG1 Y-110 X55 Z0.25 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG1 Y-110 X55 Z0.45 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG92 E0",
-	"machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 ; turn off temperature",
-	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
-	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
-	"scan_first_layer": "0",
-	"thumbnails": [
-		"140x110"
-	],
-	"use_relative_e_distances": "1",
-	"z_hop_types": "Auto Lift",
-	"retraction_speed": [ "35" ],
-	"wipe_distance": "2",
-	"extruder_clearance_radius": [ "76" ],
-	"extruder_clearance_height_to_rod": [ "27" ],
-	"extruder_clearance_height_to_lid": [ "150" ],
 	"nozzle_type": "stainless_steel"
-
 }
diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro 0.6 Nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro 0.6 Nozzle.json
index c0a024542..7ee9c093a 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro 0.6 Nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro 0.6 Nozzle.json	
@@ -4,63 +4,15 @@
 	"name": "Flashforge Adventurer 5M Pro 0.6 Nozzle",
 	"from": "system",
 	"instantiation": "true",
-	"inherits": "fdm_flashforge_common",
+	"inherits": "fdm_adventurer5m_common",
 	"printer_model": "Flashforge Adventurer 5M Pro",
-	"gcode_flavor": "klipper",
-	"default_print_profile": "0.20mm Standard @Flashforge AD5M Pro 0.6 Nozzle",
+	"default_print_profile": "0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle",
 	"nozzle_diameter": [ "0.6" ],
 	"printer_variant": "0.6",
-	"printable_area": [
-		"-110x-110",
-		"110x-110",
-		"110x110",
-		"-110x110"
-	],
-	"printable_height": "220",
-	"auxiliary_fan": "1",
-	"machine_max_acceleration_e": [ "5000", "5000" ],
-	"machine_max_acceleration_extruding": [ "20000", "20000" ],
-	"machine_max_acceleration_retracting": [ "5000", "5000" ],
-	"machine_max_acceleration_travel": [ "20000", "20000" ],
-	"machine_max_acceleration_x": [ "20000", "20000" ],
-	"machine_max_acceleration_y": [ "20000", "20000" ],
-	"machine_max_acceleration_z": [ "500", "500" ],
-	"machine_max_speed_e": [ "30", "30" ],
-	"machine_max_speed_x": [ "600", "600" ],
-	"machine_max_speed_y": [ "600", "600" ],
-	"machine_max_speed_z": [ "20", "20" ],
-	"machine_max_jerk_e": [ "2.5", "2.5" ],
-	"machine_max_jerk_x": [ "9", "9" ],
-	"machine_max_jerk_y": [ "9", "9" ],
-	"machine_max_jerk_z": [ "3", "3" ],
 	"max_layer_height": [ "0.4" ],
 	"min_layer_height": [ "0.15" ],
-	"printer_settings_id": "Flashforge",
-	"retraction_minimum_travel": [ "1" ],
-	"retract_before_wipe": [ "100%" ],
 	"retraction_length": [ "1.2" ],
-	"retract_length_toolchange": [ "2" ],
-	"deretraction_speed": [ "35" ],
-	"z_hop": [ "0.4" ],
-	"single_extruder_multi_material": "0",
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M25",
-	"default_filament_profile": [ "Flashforge Generic PLA" ],
-	"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z5 F6000\nG1 E-1.5 F800\nG1 X110 Y-110 F6000\nG1 E2 F800\nG1 Y-110 X55 Z0.25 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG1 Y-110 X55 Z0.45 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG92 E0",
-	"machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 ; turn off temperature",
-	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
-	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
-	"scan_first_layer": "0",
-	"thumbnails": [
-		"140x110"
-	],
-	"use_relative_e_distances": "1",
-	"z_hop_types": "Auto Lift",
-	"retraction_speed": [ "35" ],
-	"wipe_distance": "2",
-	"extruder_clearance_radius": [ "76" ],
-	"extruder_clearance_height_to_rod": [ "27" ],
-	"extruder_clearance_height_to_lid": [ "150" ],
 	"nozzle_type": "hardened_steel"
 
+
 }
diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro 0.8 Nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro 0.8 Nozzle.json
new file mode 100644
index 000000000..b638a1824
--- /dev/null
+++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro 0.8 Nozzle.json	
@@ -0,0 +1,18 @@
+{
+	"type": "machine",
+	"setting_id": "GM009",
+	"name": "Flashforge Adventurer 5M Pro 0.8 Nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_adventurer5m_common",
+	"printer_model": "Flashforge Adventurer 5M Pro",
+	"default_print_profile": "0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle",
+	"nozzle_diameter": [ "0.8" ],
+	"printer_variant": "0.8",
+	"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG1 Z5 F6000\nG1 E-1.5 F600\nG1 E12 F800\nG1 X85 Y110 Z0.3 F1200\nG1 X-110 E30 F2400\nG1 Y0 E8 F2400\nG1 X-109.6 F2400\nG1 Y110 E10 F2400\nG92 E0",
+	"max_layer_height": [ "0.56" ],
+	"min_layer_height": [ "0.15" ],
+	"retraction_length": [ "1.5" ],
+	"nozzle_type": "hardened_steel",
+	"z_hop": ["0"]
+}
diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro.json
index 6e4d1e81e..a9e9fc036 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro.json	
@@ -2,7 +2,7 @@
   "type": "machine_model",
   "name": "Flashforge Adventurer 5M Pro",
   "model_id": "Flashforge Adventurer 5M Pro",
-  "nozzle_diameter": "0.4;0.6",
+  "nozzle_diameter": "0.25;0.4;0.6;0.8",
   "machine_tech": "FFF",
   "family": "Flashforge",
   "bed_model": "flashforge_adventurer5m_series_buildplate_model.STL",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M.json
index bd95c9a1f..2211a634b 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M.json	
@@ -2,7 +2,7 @@
 	"type": "machine_model",
 	"name": "Flashforge Adventurer 5M",
 	"model_id": "Flashforge-Adventurer-5M",
-	"nozzle_diameter": "0.4;0.6",
+	"nozzle_diameter": "0.25;0.4;0.6;0.8",
 	"machine_tech": "FFF",
 	"family": "Flashforge",
 	"bed_model": "flashforge_adventurer5m_series_buildplate_model.STL",
diff --git a/resources/profiles/Flashforge/machine/fdm_adventurer5m_common.json b/resources/profiles/Flashforge/machine/fdm_adventurer5m_common.json
new file mode 100644
index 000000000..bf5b7ebd2
--- /dev/null
+++ b/resources/profiles/Flashforge/machine/fdm_adventurer5m_common.json
@@ -0,0 +1,57 @@
+{
+	"type": "machine",
+	"name": "fdm_adventurer5m_common",
+	"from": "system",
+	"instantiation": "false",
+	"inherits": "fdm_flashforge_common",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"-110x-110",
+		"110x-110",
+		"110x110",
+		"-110x110"
+	],
+	"printable_height": "220",
+	"auxiliary_fan": "1",
+	"machine_max_acceleration_e": [ "5000", "5000" ],
+	"machine_max_acceleration_extruding": [ "20000", "20000" ],
+	"machine_max_acceleration_retracting": [ "5000", "5000" ],
+	"machine_max_acceleration_travel": [ "20000", "20000" ],
+	"machine_max_acceleration_x": [ "20000", "20000" ],
+	"machine_max_acceleration_y": [ "20000", "20000" ],
+	"machine_max_acceleration_z": [ "500", "500" ],
+	"machine_max_speed_e": [ "30", "30" ],
+	"machine_max_speed_x": [ "600", "600" ],
+	"machine_max_speed_y": [ "600", "600" ],
+	"machine_max_speed_z": [ "20", "20" ],
+	"machine_max_jerk_e": [ "2.5", "2.5" ],
+	"machine_max_jerk_x": [ "9", "9" ],
+	"machine_max_jerk_y": [ "9", "9" ],
+	"machine_max_jerk_z": [ "3", "3" ],
+	"printer_settings_id": "Flashforge",
+	"retraction_minimum_travel": [ "1" ],
+	"retract_before_wipe": [ "100%" ],
+	"retract_length_toolchange": [ "2" ],
+	"deretraction_speed": [ "35" ],
+	"z_hop": [ "0.4" ],
+	"single_extruder_multi_material": "0",
+	"change_filament_gcode": "",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [ "Flashforge Generic PLA" ],
+	"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z5 F6000\nG1 E-1.5 F800\nG1 X110 Y-110 F6000\nG1 E2 F800\nG1 Y-110 X55 Z0.25 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG1 Y-110 X55 Z0.45 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG92 E0",
+	"machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 ; turn off temperature",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"140x110"
+	],
+	"use_relative_e_distances": "1",
+	"z_hop_types": "Auto Lift",
+	"retraction_speed": [ "35" ],
+	"wipe_distance": "2",
+	"extruder_clearance_radius": [ "76" ],
+	"extruder_clearance_height_to_rod": [ "27" ],
+	"extruder_clearance_height_to_lid": [ "150" ],
+	"version": "1.8.0.0"
+}
diff --git a/resources/profiles/Flashforge/process/0.12mm Standard @Flashforge AD5M 0.25 Nozzle.json b/resources/profiles/Flashforge/process/0.12mm Standard @Flashforge AD5M 0.25 Nozzle.json
new file mode 100644
index 000000000..efc3b98d3
--- /dev/null
+++ b/resources/profiles/Flashforge/process/0.12mm Standard @Flashforge AD5M 0.25 Nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "process",
+    "name": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
+    "inherits": "0.20mm Standard @Flashforge AD5M 0.4 Nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Flashforge Adventurer 5M 0.25 Nozzle"
+    ],
+    "setting_id": "GP012",
+    "print_settings_id": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
+    "bottom_shell_layers": "4",
+    "brim_width": "3",
+    "elefant_foot_compensation": "0",
+    "gap_infill_speed": "150",
+    "initial_layer_acceleration": "1000",
+    "initial_layer_infill_speed": "70",
+    "initial_layer_line_width": "0.3",
+    "initial_layer_print_height": "0.15",
+    "initial_layer_speed": "35",
+    "inner_wall_line_width": "0.3",
+    "inner_wall_speed": "150",
+    "internal_solid_infill_line_width": "0.3",
+    "internal_solid_infill_speed": "150",
+    "layer_height": "0.12",
+    "line_width": "0.25",
+    "outer_wall_line_width": "0.25",
+    "outer_wall_speed": "60",
+    "skirt_loops": "0",
+    "sparse_infill_line_width": "0.3",
+    "sparse_infill_speed": "100",
+    "support_bottom_z_distance": "0.12",
+    "support_interface_spacing": "0.25",
+    "support_line_width": "0.25",
+    "support_object_xy_distance": "0.2",
+    "support_speed": "80",
+    "support_top_z_distance": "0.12",
+    "top_shell_layers": "7",
+    "top_shell_thickness": "0.8",
+    "top_surface_line_width": "0.3",
+    "top_surface_speed": "150",
+    "tree_support_tip_diameter": "1.2",
+    "version": "1.8.0.0",
+    "wipe_speed": "80%"
+}
\ No newline at end of file
diff --git a/resources/profiles/Flashforge/process/0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle.json b/resources/profiles/Flashforge/process/0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle.json
new file mode 100644
index 000000000..2ea5c5c4e
--- /dev/null
+++ b/resources/profiles/Flashforge/process/0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "process",
+    "name": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
+    "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Flashforge Adventurer 5M Pro 0.25 Nozzle"
+    ],
+    "setting_id": "GP011",
+    "print_settings_id": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
+    "bottom_shell_layers": "4",
+    "brim_width": "3",
+    "elefant_foot_compensation": "0",
+    "gap_infill_speed": "150",
+    "initial_layer_acceleration": "1000",
+    "initial_layer_infill_speed": "70",
+    "initial_layer_line_width": "0.3",
+    "initial_layer_print_height": "0.15",
+    "initial_layer_speed": "35",
+    "inner_wall_line_width": "0.3",
+    "inner_wall_speed": "150",
+    "internal_solid_infill_line_width": "0.3",
+    "internal_solid_infill_speed": "150",
+    "layer_height": "0.12",
+    "line_width": "0.25",
+    "outer_wall_line_width": "0.25",
+    "outer_wall_speed": "60",
+    "skirt_loops": "0",
+    "sparse_infill_line_width": "0.3",
+    "sparse_infill_speed": "100",
+    "support_bottom_z_distance": "0.12",
+    "support_interface_spacing": "0.25",
+    "support_line_width": "0.25",
+    "support_object_xy_distance": "0.2",
+    "support_speed": "80",
+    "support_top_z_distance": "0.12",
+    "top_shell_layers": "7",
+    "top_shell_thickness": "0.8",
+    "top_surface_line_width": "0.3",
+    "top_surface_speed": "150",
+    "tree_support_tip_diameter": "1.2",
+    "version": "1.8.0.0",
+    "wipe_speed": "80%"
+}
\ No newline at end of file
diff --git a/resources/profiles/Flashforge/process/0.40mm Standard @Flashforge AD5M 0.8 Nozzle.json b/resources/profiles/Flashforge/process/0.40mm Standard @Flashforge AD5M 0.8 Nozzle.json
new file mode 100644
index 000000000..4c5075106
--- /dev/null
+++ b/resources/profiles/Flashforge/process/0.40mm Standard @Flashforge AD5M 0.8 Nozzle.json	
@@ -0,0 +1,36 @@
+{
+    "type": "process",
+    "name": "0.40mm Standard @Flashforge AD5M 0.8 Nozzle",
+    "inherits": "0.30mm Standard @Flashforge AD5M 0.6 Nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Flashforge Adventurer 5M 0.8 Nozzle"
+    ],
+    "setting_id": "GP002",
+    "print_settings_id": "0.40mm Standard @Flashforge AD5M 0.8 Nozzle",
+    "elefant_foot_compensation": "0",
+    "initial_layer_infill_speed": "55",
+    "initial_layer_line_width": "0.85",
+    "initial_layer_speed": "35",
+    "inner_wall_line_width": "0.85",
+    "internal_solid_infill_acceleration": "5000",
+    "internal_solid_infill_line_width": "0.82",
+    "layer_height": "0.4",
+    "line_width": "0.82",
+    "outer_wall_line_width": "0.82",
+    "skirt_loops": "0",
+    "sparse_infill_line_width": "0.85",
+    "support_bottom_interface_spacing": "0.4",
+    "support_bottom_z_distance": "0.22",
+    "support_interface_spacing": "0.4",
+    "support_line_width": "0.82",
+    "support_object_xy_distance": "0.4",
+    "support_top_z_distance": "0.22",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "top_surface_line_width": "0.82",
+    "tree_support_tip_diameter": "1.2",
+    "version": "1.8.0.0",
+    "wipe_speed": "60%"
+}
\ No newline at end of file
diff --git a/resources/profiles/Flashforge/process/0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle.json b/resources/profiles/Flashforge/process/0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle.json
new file mode 100644
index 000000000..28323aba7
--- /dev/null
+++ b/resources/profiles/Flashforge/process/0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle.json	
@@ -0,0 +1,36 @@
+{
+    "type": "process",
+    "name": "0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle",
+    "inherits": "0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Flashforge Adventurer 5M Pro 0.8 Nozzle"
+    ],
+    "setting_id": "GP001",
+    "print_settings_id": "0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle",
+    "elefant_foot_compensation": "0",
+    "initial_layer_infill_speed": "55",
+    "initial_layer_line_width": "0.85",
+    "initial_layer_speed": "35",
+    "inner_wall_line_width": "0.85",
+    "internal_solid_infill_acceleration": "5000",
+    "internal_solid_infill_line_width": "0.82",
+    "layer_height": "0.4",
+    "line_width": "0.82",
+    "outer_wall_line_width": "0.82",
+    "skirt_loops": "0",
+    "sparse_infill_line_width": "0.85",
+    "support_bottom_interface_spacing": "0.4",
+    "support_bottom_z_distance": "0.22",
+    "support_interface_spacing": "0.4",
+    "support_line_width": "0.82",
+    "support_object_xy_distance": "0.4",
+    "support_top_z_distance": "0.22",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "0.8",
+    "top_surface_line_width": "0.82",
+    "tree_support_tip_diameter": "1.2",
+    "version": "1.8.0.0",
+    "wipe_speed": "60%"
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/machine/fdm_machine_common.json b/resources/profiles/Qidi/machine/fdm_machine_common.json
index 94bcd6b7e..995c22940 100644
--- a/resources/profiles/Qidi/machine/fdm_machine_common.json
+++ b/resources/profiles/Qidi/machine/fdm_machine_common.json
@@ -114,6 +114,7 @@
     "default_print_profile": "",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "machine_start_gcode": "G28\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29 ; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM83\nG0 Z5 F1200\nG0 X{first_layer_print_min[0]} Y{max(0, first_layer_print_min[1] - 2)} F12000\nG0 Z0.2 F600\nG1 E3 F1800\nG0 Z0.3 F600\nG1 X{min(first_layer_print_min[0] + 30,print_bed_max[0])} E6 F600",
-	"machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG90\n{if max_layer_z < max_print_height / 2}\nG1 Z{max_print_height / 2 + 10} F600\n{else}\nG1 Z{min(max_print_height, max_layer_z + 10)}\n{endif}\nG0 X5 Y{print_bed_max[1]-11} F12000\nM141 S0"
+	"machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG90\n{if max_layer_z < max_print_height / 2}\nG1 Z{max_print_height / 2 + 10} F600\n{else}\nG1 Z{min(max_print_height, max_layer_z + 10)}\n{endif}\nG0 X5 Y{print_bed_max[1]-11} F12000\nM141 S0",
+	"time_lapse_gcode":";TIMELAPSE_TAKE_FRAME\n"
 
 }
diff --git a/src/slic3r/GUI/GUI_App.cpp b/src/slic3r/GUI/GUI_App.cpp
index 09cf851f7..c5e4ac642 100644
--- a/src/slic3r/GUI/GUI_App.cpp
+++ b/src/slic3r/GUI/GUI_App.cpp
@@ -2273,9 +2273,7 @@ bool GUI_App::on_init_inner()
         BOOST_LOG_TRIVIAL(info) << "begin to show the splash screen...";
         //BBS use BBL splashScreen
         scrn = new SplashScreen(bmp, wxSPLASH_CENTRE_ON_SCREEN | wxSPLASH_TIMEOUT, 1500, splashscreen_pos);
-#ifndef __linux__
         wxYield();
-#endif
         scrn->SetText(_L("Loading configuration")+ dots);
     }
 
diff --git a/src/slic3r/GUI/GUI_ObjectList.cpp b/src/slic3r/GUI/GUI_ObjectList.cpp
index 1f3ae959e..25a18d2c6 100644
--- a/src/slic3r/GUI/GUI_ObjectList.cpp
+++ b/src/slic3r/GUI/GUI_ObjectList.cpp
@@ -1347,6 +1347,7 @@ void ObjectList::show_context_menu(const bool evt_context_menu)
                 const ModelVolume *volume = object(obj_idx)->volumes[vol_idx];
 
                 menu = volume->is_text() ? plater->text_part_menu() :
+			volume->is_svg() ? plater->svg_part_menu() : // ORCA fixes missing "Edit SVG" item for Add/Negative/Modifier SVG objects in object list
                     plater->part_menu();
             }
             else
@@ -5024,8 +5025,17 @@ void ObjectList::change_part_type()
         }
     }
 
-    const wxString names[] = { _L("Part"), _L("Negative Part"), _L("Modifier"), _L("Support Blocker"), _L("Support Enforcer") };
-    SingleChoiceDialog dlg(_L("Type:"), _L("Choose part type"), wxArrayString(5, names), int(type));
+    // ORCA: Fix crash when changing type of svg / text modifier
+    wxArrayString names;
+    names.Add(_L("Part"));
+    names.Add(_L("Negative Part"));
+    names.Add(_L("Modifier"));
+    if (!volume->is_svg() && !volume->is_text()) {
+        names.Add(_L("Support Blocker"));
+        names.Add(_L("Support Enforcer"));
+    }
+
+    SingleChoiceDialog dlg(_L("Type:"), _L("Choose part type"), names, int(type));
     auto new_type = ModelVolumeType(dlg.GetSingleChoiceIndex());
 
 	if (new_type == type || new_type == ModelVolumeType::INVALID)
@@ -5697,9 +5707,6 @@ void ObjectList::on_plate_deleted(int plate_idx)
 void ObjectList::reload_all_plates(bool notify_partplate)
 {
     m_prevent_canvas_selection_update = true;
-#ifdef __WXOSX__
-    AssociateModel(nullptr);
-#endif
 
     // Unselect all objects before deleting them, so that no change of selection is emitted during deletion.
 
@@ -5729,9 +5736,6 @@ void ObjectList::reload_all_plates(bool notify_partplate)
 
     update_selections();
 
-#ifdef __WXOSX__
-    AssociateModel(m_objects_model);
-#endif
     m_prevent_canvas_selection_update = false;
 
     // update scene