diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot
index 84e839f5a..1e5638bf8 100644
--- a/bbl/i18n/BambuStudio.pot
+++ b/bbl/i18n/BambuStudio.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-21 10:27+0800\n"
+"POT-Creation-Date: 2023-09-25 17:40+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -2530,7 +2530,17 @@ msgstr ""
 msgid "Failed to start printing job"
 msgstr ""
 
-msgid "Invalid nozzle diameter"
+msgid ""
+"This calibration does not support the currently selected nozzle diameter"
+msgstr ""
+
+msgid "Current flowrate cali param is invalid"
+msgstr ""
+
+msgid "Selected diameter and machine diameter do not match"
+msgstr ""
+
+msgid "Failed to generate cali gcode"
 msgstr ""
 
 msgid "Calibration error"
diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po
index 4aa7ecafb..e2c9b8482 100644
--- a/bbl/i18n/de/BambuStudio_de.po
+++ b/bbl/i18n/de/BambuStudio_de.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-21 10:27+0800\n"
+"POT-Creation-Date: 2023-09-25 17:40+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2776,8 +2776,18 @@ msgstr ""
 msgid "Failed to start printing job"
 msgstr "Druckauftrag konnte nicht gestartet werden"
 
-msgid "Invalid nozzle diameter"
-msgstr "Ungültiger Düsendurchmesser"
+msgid ""
+"This calibration does not support the currently selected nozzle diameter"
+msgstr ""
+
+msgid "Current flowrate cali param is invalid"
+msgstr ""
+
+msgid "Selected diameter and machine diameter do not match"
+msgstr ""
+
+msgid "Failed to generate cali gcode"
+msgstr ""
 
 msgid "Calibration error"
 msgstr "Kalibrierungsfehler"
@@ -11112,6 +11122,9 @@ msgstr ""
 "Wussten Sie, dass Sie die Festigkeit des Modells durch mehr Wandlinien und "
 "eine höhere Dichte der Füllung verbessern können?"
 
+#~ msgid "Invalid nozzle diameter"
+#~ msgstr "Ungültiger Düsendurchmesser"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
 
diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po
index 9594939a5..c8fa9ef3c 100644
--- a/bbl/i18n/en/BambuStudio_en.po
+++ b/bbl/i18n/en/BambuStudio_en.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-21 10:27+0800\n"
+"POT-Creation-Date: 2023-09-25 17:40+0800\n"
 "Language: en\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2701,8 +2701,18 @@ msgstr ""
 msgid "Failed to start printing job"
 msgstr "Failed to start print job"
 
-msgid "Invalid nozzle diameter"
-msgstr "Invalid nozzle diameter"
+msgid ""
+"This calibration does not support the currently selected nozzle diameter"
+msgstr ""
+
+msgid "Current flowrate cali param is invalid"
+msgstr ""
+
+msgid "Selected diameter and machine diameter do not match"
+msgstr ""
+
+msgid "Failed to generate cali gcode"
+msgstr ""
 
 msgid "Calibration error"
 msgstr "Calibration error"
@@ -10807,6 +10817,9 @@ msgstr ""
 "Did you know that you can use more wall loops and higher sparse infill "
 "density to improve the strength of the model?"
 
+#~ msgid "Invalid nozzle diameter"
+#~ msgstr "Invalid nozzle diameter"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
 
diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po
index 4cf0c9004..0b00d45d9 100644
--- a/bbl/i18n/es/BambuStudio_es.po
+++ b/bbl/i18n/es/BambuStudio_es.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-21 10:27+0800\n"
+"POT-Creation-Date: 2023-09-25 17:40+0800\n"
 "Language: es\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2767,8 +2767,18 @@ msgstr ""
 msgid "Failed to start printing job"
 msgstr "No se pudo iniciar la impresión"
 
-msgid "Invalid nozzle diameter"
-msgstr "Diámetro de boquilla no válido"
+msgid ""
+"This calibration does not support the currently selected nozzle diameter"
+msgstr ""
+
+msgid "Current flowrate cali param is invalid"
+msgstr ""
+
+msgid "Selected diameter and machine diameter do not match"
+msgstr ""
+
+msgid "Failed to generate cali gcode"
+msgstr ""
 
 msgid "Calibration error"
 msgstr "Error de calibración"
@@ -11019,6 +11029,9 @@ msgstr ""
 "¿Sabía que puede utilizar más bucles de pared y una densidad de relleno "
 "dispersa más alta para mejorar la resistencia del modelo?"
 
+#~ msgid "Invalid nozzle diameter"
+#~ msgstr "Diámetro de boquilla no válido"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Placa de Ingenieria Bambu"
 
diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po
index 865d70873..8a49181ff 100644
--- a/bbl/i18n/fr/BambuStudio_fr.po
+++ b/bbl/i18n/fr/BambuStudio_fr.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-21 10:27+0800\n"
+"POT-Creation-Date: 2023-09-25 17:40+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2758,8 +2758,18 @@ msgstr ""
 msgid "Failed to start printing job"
 msgstr "Échec du lancement de la tâche d'impression"
 
-msgid "Invalid nozzle diameter"
-msgstr "Diamètre de buse invalide"
+msgid ""
+"This calibration does not support the currently selected nozzle diameter"
+msgstr ""
+
+msgid "Current flowrate cali param is invalid"
+msgstr ""
+
+msgid "Selected diameter and machine diameter do not match"
+msgstr ""
+
+msgid "Failed to generate cali gcode"
+msgstr ""
 
 msgid "Calibration error"
 msgstr "Erreur de calibration"
@@ -11116,6 +11126,9 @@ msgstr ""
 "Saviez-vous que vous pouvez définir un plus grand nombre de périmètre et une "
 "densité de remplissage plus élevée pour améliorer la résistance du modèle ?"
 
+#~ msgid "Invalid nozzle diameter"
+#~ msgstr "Diamètre de buse invalide"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Plaque Engineering Bambu"
 
diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po
index 55203a4e4..1236a8c46 100644
--- a/bbl/i18n/hu/BambuStudio_hu.po
+++ b/bbl/i18n/hu/BambuStudio_hu.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-21 10:27+0800\n"
+"POT-Creation-Date: 2023-09-25 17:40+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2741,8 +2741,18 @@ msgstr ""
 msgid "Failed to start printing job"
 msgstr "Nem sikerült elindítani a nyomtatási feladatot"
 
-msgid "Invalid nozzle diameter"
-msgstr "Érvénytelen fúvóka átmérő"
+msgid ""
+"This calibration does not support the currently selected nozzle diameter"
+msgstr ""
+
+msgid "Current flowrate cali param is invalid"
+msgstr ""
+
+msgid "Selected diameter and machine diameter do not match"
+msgstr ""
+
+msgid "Failed to generate cali gcode"
+msgstr ""
 
 msgid "Calibration error"
 msgstr "Kalibrációs hiba"
@@ -10955,6 +10965,9 @@ msgstr ""
 "Tudtad, hogy több fal vagy nagyobb kitöltés használatával javíthatod a "
 "modell szilárdságát?"
 
+#~ msgid "Invalid nozzle diameter"
+#~ msgstr "Érvénytelen fúvóka átmérő"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
 
diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po
index e8fb9665b..290bd9248 100644
--- a/bbl/i18n/it/BambuStudio_it.po
+++ b/bbl/i18n/it/BambuStudio_it.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-21 10:27+0800\n"
+"POT-Creation-Date: 2023-09-25 17:40+0800\n"
 "Language: it\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2748,8 +2748,18 @@ msgstr ""
 msgid "Failed to start printing job"
 msgstr "Impossibile avviare il processo di stampa"
 
-msgid "Invalid nozzle diameter"
-msgstr "Diametro nozzle non valido"
+msgid ""
+"This calibration does not support the currently selected nozzle diameter"
+msgstr ""
+
+msgid "Current flowrate cali param is invalid"
+msgstr ""
+
+msgid "Selected diameter and machine diameter do not match"
+msgstr ""
+
+msgid "Failed to generate cali gcode"
+msgstr ""
 
 msgid "Calibration error"
 msgstr "Errore di calibrazione"
@@ -11030,6 +11040,9 @@ msgstr ""
 "Sapevate che è possibile utilizzare un maggior numero di anelli a parete e "
 "una maggiore densità riempimento per migliorare la resistenza del modello?"
 
+#~ msgid "Invalid nozzle diameter"
+#~ msgstr "Diametro nozzle non valido"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
 
diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po
index 9780d53a4..a565cca9f 100644
--- a/bbl/i18n/ja/BambuStudio_ja.po
+++ b/bbl/i18n/ja/BambuStudio_ja.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-21 10:27+0800\n"
+"POT-Creation-Date: 2023-09-25 17:40+0800\n"
 "Language: ja\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2640,8 +2640,18 @@ msgstr ""
 msgid "Failed to start printing job"
 msgstr "造形タスクを開始できませんでした"
 
-msgid "Invalid nozzle diameter"
-msgstr "Invalid nozzle diameter"
+msgid ""
+"This calibration does not support the currently selected nozzle diameter"
+msgstr ""
+
+msgid "Current flowrate cali param is invalid"
+msgstr ""
+
+msgid "Selected diameter and machine diameter do not match"
+msgstr ""
+
+msgid "Failed to generate cali gcode"
+msgstr ""
 
 msgid "Calibration error"
 msgstr "Calibration error"
@@ -10488,6 +10498,9 @@ msgstr ""
 "強度の向上\n"
 "壁面層数やインフィルの充填密度を増やして造形強度を向上できます。"
 
+#~ msgid "Invalid nozzle diameter"
+#~ msgstr "Invalid nozzle diameter"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu エンジニアリングプレート"
 
diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po
index 9a0b81836..33f1ab474 100644
--- a/bbl/i18n/ko/BambuStudio_ko.po
+++ b/bbl/i18n/ko/BambuStudio_ko.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-21 10:27+0800\n"
+"POT-Creation-Date: 2023-09-25 17:40+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2674,8 +2674,18 @@ msgstr ""
 msgid "Failed to start printing job"
 msgstr "출력 작업을 시작하지 못했습니다."
 
-msgid "Invalid nozzle diameter"
-msgstr "Invalid nozzle diameter"
+msgid ""
+"This calibration does not support the currently selected nozzle diameter"
+msgstr ""
+
+msgid "Current flowrate cali param is invalid"
+msgstr ""
+
+msgid "Selected diameter and machine diameter do not match"
+msgstr ""
+
+msgid "Failed to generate cali gcode"
+msgstr ""
 
 msgid "Calibration error"
 msgstr "Calibration error"
@@ -10647,6 +10657,9 @@ msgstr ""
 "더 많은 벽 루프와 더 높은 내부채움 밀도를 사용하여 모델의 강도를 높일 수 있다"
 "는 사실을 알고 계셨습니까?"
 
+#~ msgid "Invalid nozzle diameter"
+#~ msgstr "Invalid nozzle diameter"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
 
diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po
index 022f7420e..7358dd868 100644
--- a/bbl/i18n/nl/BambuStudio_nl.po
+++ b/bbl/i18n/nl/BambuStudio_nl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-21 10:27+0800\n"
+"POT-Creation-Date: 2023-09-25 17:40+0800\n"
 "Language: nl\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2763,8 +2763,18 @@ msgstr ""
 msgid "Failed to start printing job"
 msgstr "Het starten van de printopdracht is mislukt"
 
-msgid "Invalid nozzle diameter"
-msgstr "Ongeldige nozzle diameter"
+msgid ""
+"This calibration does not support the currently selected nozzle diameter"
+msgstr ""
+
+msgid "Current flowrate cali param is invalid"
+msgstr ""
+
+msgid "Selected diameter and machine diameter do not match"
+msgstr ""
+
+msgid "Failed to generate cali gcode"
+msgstr ""
 
 msgid "Calibration error"
 msgstr "Kalibratiefout"
@@ -11078,6 +11088,9 @@ msgstr ""
 "Wist je dat je meer wandlussen en een hogere dunne invuldichtheid kunt "
 "gebruiken om de sterkte van het model te verbeteren?"
 
+#~ msgid "Invalid nozzle diameter"
+#~ msgstr "Ongeldige nozzle diameter"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering (technische) plate"
 
diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po
index 88aed2147..100ebd5c2 100644
--- a/bbl/i18n/sv/BambuStudio_sv.po
+++ b/bbl/i18n/sv/BambuStudio_sv.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-21 10:27+0800\n"
+"POT-Creation-Date: 2023-09-25 17:40+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2718,8 +2718,18 @@ msgstr ""
 msgid "Failed to start printing job"
 msgstr "Det gick inte att starta utskriftsjobbet"
 
-msgid "Invalid nozzle diameter"
-msgstr "Ogiltig nozzle diameter"
+msgid ""
+"This calibration does not support the currently selected nozzle diameter"
+msgstr ""
+
+msgid "Current flowrate cali param is invalid"
+msgstr ""
+
+msgid "Selected diameter and machine diameter do not match"
+msgstr ""
+
+msgid "Failed to generate cali gcode"
+msgstr ""
 
 msgid "Calibration error"
 msgstr "Fel vid kalibrering"
@@ -10845,6 +10855,9 @@ msgstr ""
 "Visste du att du kan använda fler väggslingor och högre gles fyllningstäthet "
 "för att förbättra modellens styrka?"
 
+#~ msgid "Invalid nozzle diameter"
+#~ msgstr "Ogiltig nozzle diameter"
+
 #~ msgid "Bamabu Engineering Plate"
 #~ msgstr "Bambu Engineering Plate"
 
diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
index a61284067..7e46b5464 100644
--- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
+++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-21 10:27+0800\n"
+"POT-Creation-Date: 2023-09-25 17:40+0800\n"
 "PO-Revision-Date: 2023-09-18 09:18+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
 "Language-Team: \n"
@@ -2617,8 +2617,18 @@ msgstr ""
 msgid "Failed to start printing job"
 msgstr "发起打印任务失败"
 
-msgid "Invalid nozzle diameter"
-msgstr "非法喷嘴口径"
+msgid ""
+"This calibration does not support the currently selected nozzle diameter"
+msgstr "该标定不支持当前选中喷嘴直径"
+
+msgid "Current flowrate cali param is invalid"
+msgstr "当前流量标定参数非法"
+
+msgid "Selected diameter and machine diameter do not match"
+msgstr "选择的直径和机器直径不匹配"
+
+msgid "Failed to generate cali gcode"
+msgstr "生成标定GCode失败"
 
 msgid "Calibration error"
 msgstr "校准错误"
@@ -10290,6 +10300,9 @@ msgstr ""
 "提高强度\n"
 "你知道吗？你可以使用更多的墙层数和更高的疏散填充密度来提高模型的强度。"
 
+#~ msgid "Invalid nozzle diameter"
+#~ msgstr "非法喷嘴口径"
+
 #~ msgid ""
 #~ "The current chamber temperature or the target chamber temperature exceeds "
 #~ "45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
diff --git a/resources/i18n/de/BambuStudio.mo b/resources/i18n/de/BambuStudio.mo
index 357e659df..bc6146d9c 100644
Binary files a/resources/i18n/de/BambuStudio.mo and b/resources/i18n/de/BambuStudio.mo differ
diff --git a/resources/i18n/en/BambuStudio.mo b/resources/i18n/en/BambuStudio.mo
index f5f587915..86105255a 100644
Binary files a/resources/i18n/en/BambuStudio.mo and b/resources/i18n/en/BambuStudio.mo differ
diff --git a/resources/i18n/es/BambuStudio.mo b/resources/i18n/es/BambuStudio.mo
index de33ff24f..70fea391e 100644
Binary files a/resources/i18n/es/BambuStudio.mo and b/resources/i18n/es/BambuStudio.mo differ
diff --git a/resources/i18n/fr/BambuStudio.mo b/resources/i18n/fr/BambuStudio.mo
index 8a2211e58..96e98a1be 100644
Binary files a/resources/i18n/fr/BambuStudio.mo and b/resources/i18n/fr/BambuStudio.mo differ
diff --git a/resources/i18n/hu/BambuStudio.mo b/resources/i18n/hu/BambuStudio.mo
index 3e73507c8..31a0a1f20 100644
Binary files a/resources/i18n/hu/BambuStudio.mo and b/resources/i18n/hu/BambuStudio.mo differ
diff --git a/resources/i18n/it/BambuStudio.mo b/resources/i18n/it/BambuStudio.mo
index f0bc3c697..572ca7315 100644
Binary files a/resources/i18n/it/BambuStudio.mo and b/resources/i18n/it/BambuStudio.mo differ
diff --git a/resources/i18n/ja/BambuStudio.mo b/resources/i18n/ja/BambuStudio.mo
index 3c90662db..210ed4bcc 100644
Binary files a/resources/i18n/ja/BambuStudio.mo and b/resources/i18n/ja/BambuStudio.mo differ
diff --git a/resources/i18n/ko/BambuStudio.mo b/resources/i18n/ko/BambuStudio.mo
index 0649440b4..c787a5485 100644
Binary files a/resources/i18n/ko/BambuStudio.mo and b/resources/i18n/ko/BambuStudio.mo differ
diff --git a/resources/i18n/nl/BambuStudio.mo b/resources/i18n/nl/BambuStudio.mo
index f49d4bb9e..2853a05f7 100644
Binary files a/resources/i18n/nl/BambuStudio.mo and b/resources/i18n/nl/BambuStudio.mo differ
diff --git a/resources/i18n/sv/BambuStudio.mo b/resources/i18n/sv/BambuStudio.mo
index bf53c5b8c..1c0c3c531 100644
Binary files a/resources/i18n/sv/BambuStudio.mo and b/resources/i18n/sv/BambuStudio.mo differ
diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo
index bbf2a1913..2833364e6 100644
Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ
diff --git a/src/slic3r/GUI/DeviceManager.cpp b/src/slic3r/GUI/DeviceManager.cpp
index 1a4bbe6d4..ccefde7c9 100644
--- a/src/slic3r/GUI/DeviceManager.cpp
+++ b/src/slic3r/GUI/DeviceManager.cpp
@@ -4101,7 +4101,16 @@ int MachineObject::parse_json(std::string payload)
                             GUI::wxGetApp().CallAfter([cali_mode, reason] {
                                 wxString info = "";
                                 if (reason == "invalid nozzle_diameter") {
-                                    info = _L("Invalid nozzle diameter");
+                                    info = _L("This calibration does not support the currently selected nozzle diameter");
+                                }
+                                else if (reason == "invalid handle_flowrate_cali param") {
+                                    info = _L("Current flowrate cali param is invalid");
+                                }
+                                else if (reason == "nozzle_diameter is not matched") {
+                                    info = _L("Selected diameter and machine diameter do not match");
+                                }
+                                else if (reason == "generate auto filament cali gcode failure") {
+                                    info = _L("Failed to generate cali gcode");
                                 }
                                 else {
                                     info = reason;