orcaslicer/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json

{
	"type": "machine",
	"setting_id": "GM001",
	"printer_settings_id": "Creality",
	"name": "Creality Ender-3 V3 KE 0.4 nozzle",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_creality_common",
	"printer_model": "Creality Ender-3 V3 KE",
	"gcode_flavor": "klipper",
	"printer_structure": "i3",
	"default_print_profile": "0.20mm Standard @Creality Ender3V3KE",
	"extruder_clearance_height_to_rod": "47",
    "extruder_clearance_max_radius": "90",
    "extruder_clearance_radius": "90",
    "machine_load_filament_time": "11",
	"support_chamber_temp_control": "false",
	"support_air_filtration": ["false"],
	"nozzle_diameter": [
		"0.4"
	],
	"printable_area": [
		"0x0",
		"220x0",
		"220x220",
		"0x220"
	],
	"printable_height": "240",
	"nozzle_type": "brass",
	"auxiliary_fan": "0",
	"machine_max_acceleration_extruding": [
		"8000",
		"8000"
	],
	"machine_max_acceleration_retracting": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_travel": [
		"8000",
		"8000"
	],
	"machine_max_acceleration_x": [
		"8000",
		"8000"
	],
	"machine_max_acceleration_y": [
		"8000",
		"8000"
	],
	"machine_max_acceleration_z": [
		"500",
		"500"
	],
	"machine_max_speed_e": [
		"100",
		"100"
	],
	"machine_max_speed_x": [
		"500",
		"500"
	],
	"machine_max_speed_y": [
		"500",
		"500"
	],
	"machine_max_speed_z": [
		"30",
		"30"
	],
	"machine_max_jerk_e": [
		"5",
		"5"
	],
	"machine_max_jerk_x": [
		"10",
		"10"
	],
	"machine_max_jerk_y": [
		"10",
		"10"
	],
	"machine_max_jerk_z": [
		"0.4",
		"0.4"
	],
	"max_layer_height": [
		"0.36"
	],
	"min_layer_height": [
		"0.08"
	],
	"retraction_minimum_travel": [
		"2"
	],
	"retract_before_wipe": [
		"70%"
	],
	"retraction_length": [
		"0.5"
	],
	"retract_length_toolchange": [
		"1"
	],
	"retraction_speed": [
		"40"
	],
	"deretraction_speed": [
		"40"
	],
    "z_hop": [
        "0.1"
    ],
	"single_extruder_multi_material": "1",
	"change_filament_gcode": "PAUSE",
	"machine_pause_gcode": "M25",
	"default_filament_profile": [
		"Creality Generic PLA @Ender-3V3-all"
	],
	"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X-2.0 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X-2.0 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-1.7 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-1.7 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
	"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z5 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
	"scan_first_layer": "0"
}