orcaslicer/resources/profiles/CONSTRUCT3D/machine/fdm_machine_common.json

{
    "type": "machine",
    "name": "fdm_machine_common",
    "from": "system",
    "instantiation": "false",
    "printer_technology": "FFF",
    "deretraction_speed": [
        "50"
    ],
    "extruder_colour": [
        "#003f87"
    ],
    "extruder_offset": [
        "0x0"
    ],
    "gcode_flavor": "reprapfirmware",
	"host_type": "duet",
	"printhost_apikey": "",
    "printhost_authorization_type": "key",
    "printhost_cafile": "",
    "printhost_password": "",
    "printhost_port": "",
    "printhost_ssl_ignore_revoke": "0",
    "printhost_user": "",
    "silent_mode": "0",
    "machine_max_acceleration_e": [
        "8000"
    ],
    "machine_max_acceleration_extruding": [
        "9000"
    ],
    "machine_max_acceleration_retracting": [
        "9000"
    ],
    "machine_max_acceleration_x": [
        "9000"
    ],
    "machine_max_acceleration_y": [
        "9000"
    ],
    "machine_max_acceleration_z": [
        "400"
    ],
    "machine_max_speed_e": [
        "100"
    ],
    "machine_max_speed_x": [
        "320"
    ],
    "machine_max_speed_y": [
        "320"
    ],
    "machine_max_speed_z": [
        "30"
    ],
    "machine_max_jerk_e": [
        "10"
    ],
    "machine_max_jerk_x": [
        "20"
    ],
    "machine_max_jerk_y": [
        "20"
    ],
    "machine_max_jerk_z": [
        "0.2"
    ],
    "machine_min_extruding_rate": [
        "0"
    ],
    "machine_min_travel_rate": [
        "0"
    ],
    "max_layer_height": [
        "0.80"
    ],
    "min_layer_height": [
        "0.08"
    ],
    "printable_height": "180",
    "extruder_clearance_radius": "65",
    "extruder_clearance_height_to_rod": "36",
    "extruder_clearance_height_to_lid": "140",
    "nozzle_diameter": [
        "0.6"
    ],
    "printer_settings_id": "",
    "retraction_minimum_travel": [
        "2.6"
    ],
    "retract_before_wipe": [
        "70%"
    ],
    "retract_when_changing_layer": [
        "1"
    ],
    "retraction_length": [
        "1"
    ],
    "retract_length_toolchange": [
        "1"
    ],
    "z_hop": [
        "0.2"
    ],
    "retract_restart_extra": [
        "0"
    ],
    "retract_restart_extra_toolchange": [
        "0"
    ],
    "retraction_speed": [
        "50"
    ],
    "single_extruder_multi_material": "1",
    "change_filament_gcode": "",
    "wipe": [
        "1"
    ],
	"thumbnails_format": "QOI",
	    "thumbnails": [
        "160x160"
    ],
    "z_lift_type": "Auto Lift",
    "default_print_profile": "",
    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
    "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM106 S0 ; Turn Fan off\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM190 S[first_layer_bed_temperature] ; set bed temp\nM109 S160 ; set extruder temp\nG28 ; home all\nG1 Z15 F6000 ; move the printer down 15mm\nG1 Y1.0 Z0.3 F4000 ; move print head up\nM109 S[first_layer_temperature] ; set extruder temp\n\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n;prime the extruder\nG1 X5 Y2 Z0.3 F6000; go to edge of build volume\nG1 X60 E10 F1000 ;gentle purge start\nG1 X110 E25 F1000; heavy purge\nG1 X60;",
    "machine_end_gcode": ";Retract the filament\nG92 E1\nG1 E-5 F900\n;Move nozzle fast\nG1 X5 Y258 F15000\n;Move Bed Down\nG1 Z180 F6000\n\n;Set machine to idle\nM104 S0\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors",
    "auxiliary_fan": "0"
	}