orcaslicer/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json

{
	"type": "machine",
	"setting_id": "GM001",
	"name": "Creality K1 (0.4 nozzle)",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_creality_common",
	"printer_model": "Creality K1",
	"gcode_flavor": "klipper",
	"default_print_profile": "0.20mm Standard @Creality K1 (0.4 nozzle)",
	"nozzle_diameter": ["0.4"],
	"printer_variant": "0.4",
	"printable_area": ["0x0", "220x0", "220x220", "0x220"],
	"printable_height": "250",
	"nozzle_type": "brass",
	"auxiliary_fan": "1",
	"support_multi_bed_types": "1",
	"machine_max_acceleration_e": ["5000", "5000"],
	"machine_max_acceleration_extruding": ["20000", "20000"],
	"machine_max_acceleration_retracting": ["5000", "5000"],
	"machine_max_acceleration_travel": ["9000", "9000"],
	"machine_max_acceleration_x": ["20000", "20000"],
	"machine_max_acceleration_y": ["20000", "20000"],
	"machine_max_acceleration_z": ["500", "500"],
	"machine_max_speed_e": ["100", "100"],
	"machine_max_speed_x": ["800", "800"],
	"machine_max_speed_y": ["800", "800"],
	"machine_max_speed_z": ["20", "20"],
	"machine_max_jerk_e": ["2.5", "2.5"],
	"machine_max_jerk_x": ["12", "12"],
	"machine_max_jerk_y": ["12", "12"],
	"machine_max_jerk_z": ["2", "2"],
	"max_layer_height": ["0.3"],
	"min_layer_height": ["0.08"],
	"printer_settings_id": "Creality",
	"retraction_minimum_travel": ["2"],
	"retract_before_wipe": ["70%"],
	"retraction_length": ["0.6"],
	"retract_length_toolchange": ["1"],
	"retraction_speed": ["40"],
	"deretraction_speed": ["40"],
	"extruder_clearance_height_to_lid": "101",
	"extruder_clearance_height_to_rod": "45",
	"extruder_clearance_radius": "45",
	"z_hop": ["0.2"],
	"single_extruder_multi_material": "1",
	"manual_filament_change": "1",
	"change_filament_gcode": "PAUSE",
	"machine_pause_gcode": "PAUSE",
	"default_filament_profile": ["Creality HF Generic PLA"],
	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
	"machine_end_gcode": "END_PRINT",
	"scan_first_layer": "0",
	"thumbnails": [
		"100x100",
		"320x320"
	]
}