orcaslicer/resources/profiles/UltiMaker/machine/UltiMaker 2 0.4 nozzle.json

{
	"type": "machine",
	"setting_id": "GM001",
	"name": "UltiMaker 2 0.4 nozzle",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_machine_common",
	"printer_model": "UltiMaker 2",
	"default_print_profile": "0.18mm Standard @UltiMaker 2",
	"nozzle_diameter": [
		"0.4"
	],
	"printable_area": [
		"0x0",
		"224x0",
		"224x225",
		"0x225"
	],
	"printable_height": "212",
	"nozzle_type": "undefine",
	"auxiliary_fan": "0",
	"machine_max_acceleration_extruding": [
		"1500",
		"1500"
	],
	"machine_max_acceleration_retracting": [
		"1500",
		"1500"
	],
	"machine_max_acceleration_travel": [
		"3000",
		"3000"
	],
	"machine_max_acceleration_x": [
		"3000",
		"3000"
	],
	"machine_max_acceleration_y": [
		"3000",
		"3000"
	],
	"machine_max_acceleration_z": [
		"500",
		"500"
	],
	"machine_max_speed_e": [
		"120",
		"120"
	],
	"machine_max_speed_x": [
		"500",
		"500"
	],
	"machine_max_speed_y": [
		"500",
		"500"
	],
	"machine_max_speed_z": [
		"12",
		"12"
	],
	"machine_max_jerk_e": [
		"2.5",
		"2.5"
	],
	"machine_max_jerk_x": [
		"20",
		"20"
	],
	"machine_max_jerk_y": [
		"20",
		"20"
	],
	"machine_max_jerk_z": [
		"0.4",
		"0.4"
	],
	"max_layer_height": [
		"0.3"
	],
	"min_layer_height": [
		"0.08"
	],
	"printer_settings_id": "Qidi",
	"retraction_minimum_travel": [
		"5"
	],
	"retract_before_wipe": [
		"70%"
	],
	"retraction_length": [
		"4.5"
	],
	"retract_length_toolchange": [
		"10"
	],
	"retraction_speed": [
        "35"
    ],
	"deretraction_speed": [
		"0"
	],
	"wipe_distance": [
        "0.2"
    ],
	"single_extruder_multi_material": "1",
	"change_filament_gcode": "",
	"machine_pause_gcode": "M0",
	"default_filament_profile": [
		"UltiMaker Generic PLA"
	],
	"machine_start_gcode": "; # # # # # # START Header\nG21; metric values\nG90; absolute positioning\nM82 ; set extruder to absolute mode\nM107; start with the fan off\n\nM140 S[bed_temperature_initial_layer_single]; start bed heating\n\nG28 X0 Y0 Z0; move X/Y/Z to endstops\nG1 X1 Y6 F15000; move X/Y to start position\nG1 Z35 F9000; move Z to start position\n\n; Wait for bed and nozzle temperatures\nM190 S{hot_plate_temp_initial_layer[0] - 5}; wait for bed temperature - 5\nM140 S[bed_temperature_initial_layer_single]; continue bed heating\nM109 S[nozzle_temperature_initial_layer]; wait for nozzle temperature\n\n; Purge and prime\nM83; set extruder to relative mode\nG92 E0; reset extrusion distance\nG0 X0 Y1 F10000\nG1 F150 E20 ; compress the bowden tube\nG1 E-8 F1200\nG0 X30 Y1 F5000\nG0 F1200 Z{initial_layer_print_height/2}; Cut the connection to priming blob\nG0 X100 F10000; disconnect with the prime blob\nG0 X50; Avoid the metal clip holding the Ultimaker glass plate\nG0 Z0.2 F720\nG1 E8 F1200\nG1 X80 E3 F1000; intro line 1\nG1 X110 E4 F1000 ; intro line 2\nG1 X140 F600; drag filament to decompress bowden tube\nG1 X100 F3200; wipe backwards a bit\nG1 X150 F3200; back to where there is no plastic: avoid dragging\nG92 E0; reset extruder reference\nM82; set extruder to absolute mode\n\n; # # # # # # END Header",
	"machine_end_gcode": "; # # # # # # START Footer\nG91; relative coordinates\n;G1 E-1 F1200; retract the filament\nG1 Z+15  X-10 Y-10 E-7  F6000; move Z a bit\n; G1 X-10 Y-10 F6000; move XY a bit\nG1 E-5.5 F300; retract the filament\nG28 X0 Y0; move X/Y to min endstops, so the head is out of the way\nM104 S0; extruder heater off\nM140 S0; heated bed heater off (if you have it)\nM84; disable motors\n; # # # # # # END Footer\n",
	"scan_first_layer": "0"
}