orcaslicer/resources/profiles/FLSun/machine/FLSun QQ-S Pro 0.4 nozzle.json

{
    "type": "machine",
    "setting_id": "GM003",
    "name": "FLSun QQ-S Pro 0.4 nozzle",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_machine_common",
    "printer_model": "FLSun QQ-S Pro",
    "default_print_profile": "0.20mm Standard @FLSun QQSPro",
	"gcode_flavor": "marlin",
	"thumbnails": [
        "260x260"
    ],
	"nozzle_diameter": [
		"0.4"
	],
	"printable_area": [
		"129.505x11.3302",
		"128.025x22.5743",
		"125.57x33.6465",
		"122.16x44.4626",
		"117.82x54.9404",
		"112.583x65",
		"106.49x74.5649",
		"99.5858x83.5624",
		"91.9239x91.9239",
		"83.5624x99.5858",
		"74.5649x106.49",
		"65x112.583",
		"54.9404x117.82",
		"44.4626x122.16",
		"33.6465x125.57",
		"22.5743x128.025",
		"11.3302x129.505",
		"7.9602e-15x130",
		"-11.3302x129.505",
		"-22.5743x128.025",
		"-33.6465x125.57",
		"-44.4626x122.16",
		"-54.9404x117.82",
		"-65x112.583",
		"-74.5649x106.49",
		"-83.5624x99.5858",
		"-91.9239x91.9239",
		"-99.5858x83.5624",
		"-106.49x74.5649",
		"-112.583x65",
		"-117.82x54.9404",
		"-122.16x44.4626",
		"-125.57x33.6465",
		"-128.025x22.5743",
		"-129.505x11.3302",
		"-130x1.59204e-14",
		"-129.505x-11.3302",
		"-128.025x-22.5743",
		"-125.57x-33.6465",
		"-122.16x-44.4626",
		"-117.82x-54.9404",
		"-112.583x-65",
		"-106.49x-74.5649",
		"-99.5858x-83.5624",
		"-91.9239x-91.9239",
		"-83.5624x-99.5858",
		"-74.5649x-106.49",
		"-65x-112.583",
		"-54.9404x-117.82",
		"-44.4626x-122.16",
		"-33.6465x-125.57",
		"-22.5743x-128.025",
		"-11.3302x-129.505",
		"-2.38806e-14x-130",
		"11.3302x-129.505",
		"22.5743x-128.025",
		"33.6465x-125.57",
		"44.4626x-122.16",
		"54.9404x-117.82",
		"65x-112.583",
		"74.5649x-106.49",
		"83.5624x-99.5858",
		"91.9239x-91.9239",
		"99.5858x-83.5624",
		"106.49x-74.5649",
		"112.583x-65",
		"117.82x-54.9404",
		"122.16x-44.4626",
		"125.57x-33.6465",
		"128.025x-22.5743",
		"129.505x-11.3302",
		"130x-3.18408e-14"
	],
	"printable_height": "360",
	"nozzle_type": "hardened_steel",
	"auxiliary_fan": "0",
    "machine_max_acceleration_e": [
        "3000",
        "800"
    ],
	"machine_max_acceleration_extruding": [
		"1500",
		"800"
	],
	"machine_max_acceleration_retracting": [
		"2000",
		"800"
	],
	"machine_max_acceleration_travel": [
		"1500",
		"800"
	],
	"machine_max_acceleration_x": [
		"1500",
		"800"
	],
	"machine_max_acceleration_y": [
		"1500",
		"800"
	],
	"machine_max_acceleration_z": [
		"1500",
		"800"
	],
	"machine_max_speed_e": [
		"60",
		"30"
	],
	"machine_max_speed_x": [
		"200",
		"150"
	],
	"machine_max_speed_y": [
		"200",
		"150"
	],
	"machine_max_speed_z": [
		"200",
		"150"
	],
	"machine_max_jerk_e": [
		"5",
		"5"
	],
	"machine_max_jerk_x": [
		"5",
		"10"
	],
	"machine_max_jerk_y": [
		"5",
		"10"
	],
	"machine_max_jerk_z": [
		"5",
		"10"
	],
	"max_layer_height": [
		"0.32"
	],
	"min_layer_height": [
		"0.08"
	],
	"printer_settings_id": "FLSun",
	"retraction_minimum_travel": [
		"2"
	],
	"retract_before_wipe": [
		"70%"
	],
	"retraction_length": [
		"5"
	],
	"retract_length_toolchange": [
		"1"
	],
	"retraction_speed": [
		"30"
	],
	"deretraction_speed": [
		"40"
	],
	"single_extruder_multi_material": "1",
	"change_filament_gcode": "",
	"machine_pause_gcode": "M400 U1\n",
	"default_filament_profile": [
		"FLSun Generic PLA"
	],
	"machine_start_gcode": ";STARTGCODE\nM117 Initializing\n; Set coordinate modes\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; Reset speed and extrusion rates\nM200 D0 ; disable volumetric E\nM220 S100 ; reset speed\n; Set initial warmup temps\nM117 Nozzle preheat\nM104 S100 ; preheat extruder to no ooze temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed final temp\nM300 S40 P10 ; Bip\n; Home\nM117 Homing\nG28 ; home all with default mesh bed level\n; For ABL users put G29 for a leveling request\n; Final warmup routine\nM117 Final warmup\nM104 S[nozzle_temperature_initial_layer] ; set extruder final temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder final temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed final temp\nM300 S440 P200; 1st beep for printer ready and allow some time to clean nozzle\nM300 S0 P250; wait between dual beep\nM300 S440 P200; 2nd beep for printer ready\nG4 S10; wait to clean the nozzle\nM300 S440 P200; 3rd beep for ready to start printing\n; Prime line routine\nM117 Printing prime line\n;M900 K0; Disable Linear Advance (Marlin) for prime line\nG92 E0.0; reset extrusion distance\nG1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area\nG92 E0.0; reset extrusion distance\nG1 E2 F1000 ; de-retract and push ooze\nG3 X38.904 Y-102.668 I54.672 J95.105 E20.999\nG3 X54.671 Y-95.203 I-38.815 J102.373 E5.45800\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y-96.185 F1000 ; wipe\nG1 X50.985 Y-97.231 F1000 ; wipe\nG1 X49.018 Y-98.238 F1000 ; wipe\nG1 X0 Y-109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\n; Final print adjustments\nM117 Preparing to print\n;M82 ; extruder absolute mode\nM221 S{if layer_height<0.075}100{else}95{endif}\nM300 S40 P10 ; chirp\nM117 Print [output_filename_format]; Display: Printing started...",
	"machine_end_gcode": "; printing object ENDGCODE\nG92 E0.0 ; prepare to retract\nG1 E-6 F3000; retract to avoid stringing\n; Anti-stringing end wiggle\n{if layer_z < max_print_height}G1 Z{min(layer_z+100, max_print_height)}{endif} F4000 ; Move print head up\nG1 X0 Y120 F3000 ; present print\n; Reset print setting overrides\nG92 E0\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extruder factor to 100%\n;M900 K0 ; reset linear acceleration(Marlin)\n; Shut down printer\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM18 S180 ;disable motors after 180s\nM300 S40 P10 ; Bip\nM117 Print finish.",
	"scan_first_layer": "0"
  }