orcaslicer/resources/profiles/Geeetech/machine/Geeetech M1 0.4 nozzle.json

115 lines
3.4 KiB
JSON
Raw Normal View History

{
"type": "machine",
"setting_id": "GM_GEEETECH_040",
"name": "Geeetech M1 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_geeetech_common",
"printer_model": "Geeetech M1",
"default_filament_profile": [
"Generic PLA @Geeetech"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech M1",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Direct"
],
"machine_max_acceleration_e": [
"2000",
"2000"
],
"machine_max_acceleration_extruding": [
"2000",
"2000"
],
"machine_max_acceleration_retracting": [
"2000",
"2000"
],
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_x": [
"3000",
"3000"
],
"machine_max_acceleration_y": [
"3000",
"3000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"25",
"25"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"10",
"10"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"3",
"3"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"retraction_length": [
"1"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"105x0",
"105x105",
"0x105"
],
"printable_height": "95",
"retract_lift_below":[
"95"
],
"machine_start_gcode": ";Geeetech M1 official wiki URL for M1https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}