orcaslicer/resources/profiles/Snapmaker/filament/fdm_filament_pa.json

{
  "type": "filament",
  "from": "system",
  "instantiation": "false",
  "name": "fdm_filament_pa",
  "inherits": "fdm_filament_common",
  "required_nozzle_HRC": [
    "40"
  ],
  "hot_plate_temp": [
    "90"
  ],
  "hot_plate_temp_initial_layer": [
    "85"
  ],
  "overhang_fan_threshold": [
    "0%"
  ],
  "overhang_fan_speed": [
    "60"
  ],
  "close_fan_the_first_x_layers": [
    "3"
  ],
  "reduce_fan_stop_start_freq": [
    "1"
  ],
  "fan_cooling_layer_time": [
    "20"
  ],
  "filament_cost": [
    "150"
  ],
  "filament_density": [
    "1.09"
  ],
  "filament_max_volumetric_speed": [
    "8"
  ],
  "filament_retraction_minimum_travel": [
    "0"
  ],
  "filament_retraction_length": [
    "2"
  ],
  "filament_retraction_speed": [
    "36"
  ],
  "nozzle_temperature_initial_layer": [
    "255"
  ],
  "nozzle_temperature": [
    "250"
  ],
  "temperature_vitrification": [
    "203"
  ],
  "full_fan_speed_layer": [
    "3"
  ],
  "fan_max_speed": [
    "65"
  ],
  "fan_min_speed": [
    "30"
  ],
  "slow_down_min_speed": [
    "15"
  ],
  "slow_down_layer_time": [
    "20"
  ],
  "cool_plate_temp": [
    "90"
  ],
  "eng_plate_temp": [
    "90"
  ],
  "textured_plate_temp": [
    "90"
  ],
  "cool_plate_temp_initial_layer": [
    "85"
  ],
  "eng_plate_temp_initial_layer": [
    "85"
  ],
  "textured_plate_temp_initial_layer": [
    "85"
  ],
  "default_filament_colour": [
    "#3D3C39"
  ],
  "filament_type": [
    "PA-CF"
  ],
  "nozzle_temperature_range_low": [
    "250"
  ],
  "nozzle_temperature_range_high": [
    "260"
  ],
  "filament_notes": [
    "!! It needs to be dried before use.\n"
  ]
}