orcaslicer/resources/profiles/Creality/machine/Creality Ender-3 V2 Neo 0.4 nozzle.json

{
  "type": "machine",
  "setting_id": "GM001",
  "name": "Creality Ender-3 V2 Neo 0.4 nozzle",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_creality_common",
  "printer_model": "Creality Ender-3 V2 Neo",
  "printer_structure": "i3",
  "default_filament_profile": [
    "Creality Generic PLA"
  ],
  "default_print_profile": "0.20mm Standard @Creality Ender3V2 Neo",
  "nozzle_diameter": [
    "0.4"
  ],
  "printable_area": [
    "0x0",
    "220x0",
    "220x220",
    "0x220"
  ],
  "printable_height": "250",
  "nozzle_type": "brass",
  "auxiliary_fan": "0",
  "machine_max_acceleration_extruding": [
      "5000",
      "5000"
  ],
  "machine_max_acceleration_retracting": [
      "5000",
      "5000"
  ],
  "machine_max_acceleration_travel": [
      "500",
      "500"
  ],
  "machine_max_acceleration_x": [
      "500",
      "500"
  ],
  "machine_max_acceleration_y": [
      "500",
      "500"
  ],
  "machine_max_acceleration_z": [
      "100",
      "100"
  ],
  "machine_max_speed_e": [
      "50",
      "50"
  ],
  "machine_max_speed_x": [
      "500",
      "500"
  ],
  "machine_max_speed_y": [
      "500",
      "500"
  ],
  "machine_max_speed_z": [
      "10",
      "10"
  ],
  "machine_max_jerk_e": [
      "5",
      "5"
  ],
  "machine_max_jerk_x": [
      "10",
      "10"
  ],
  "machine_max_jerk_y": [
      "10",
      "10"
  ],
  "machine_max_jerk_z": [
      "0.4",
      "0.4"
  ],
	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp\n\nG28 ;Home\nG29 ;Auto bed leveling (create mesh if not already stored)\nM420 S1 ;Enable mesh leveling\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
  "thumbnails_format": "JPG",
  "thumbnails": [
    "200x200"
  ]
}