orcaslicer/resources/profiles/Eryone/machine/Thinker X400 0.4 nozzle.json

{
    "type": "machine",
    "setting_id": "GM003",
    "name": "Thinker X400 0.4 nozzle",
    "from": "system",
    "instantiation": "true",
    "printer_model": "Thinker X400",
    "default_print_profile": "0.20mm Standard @Thinker X400",
    "default_filament_profile":"Eryone Generic PLA;Eryone Generic ABS;Eryone Generic ASA;Eryone Generic PETG;Eryone Generic Silk PLA;Eryone Generic TPU",
    "auxiliary_fan": "0",
    "bed_custom_model": "",
    "bed_custom_texture": "",
    "bed_exclude_area": [
        "0x0"
    ],
    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
    "best_object_pos": "0.5,0.5",
    "change_filament_gcode": "",
    "cooling_tube_length": "5",
    "cooling_tube_retraction": "91.5",
    "deretraction_speed": [
        "30"
    ],
    "enable_filament_ramming": "1",
    "extra_loading_move": "-2",
    "extruder_clearance_height_to_lid": "135",
    "extruder_clearance_height_to_rod": "40",
    "extruder_clearance_radius": "85",
    "extruder_colour": [
        "#FCE94F"
    ],
    "extruder_offset": [
        "0x0"
    ],
    "fan_kickstart": "0",
    "fan_speedup_overhangs": "1",
    "fan_speedup_time": "0",
    "gcode_flavor": "klipper",
    "high_current_on_filament_swap": "0",
    "host_type": "octoprint",
    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
    "machine_end_gcode": "PRINT_END",
    "machine_load_filament_time": "0",
    "machine_max_acceleration_e": [
        "10000",
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "5000",
        "20000"
    ],
    "machine_max_acceleration_retracting": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_travel": [
        "12000",
        "20000"
    ],
    "machine_max_acceleration_x": [
        "10000",
        "20000"
    ],
    "machine_max_acceleration_y": [
        "10000",
        "20000"
    ],
    "machine_max_acceleration_z": [
        "300",
        "200"
    ],
    "machine_max_jerk_e": [
        "2.5",
        "2.5"
    ],
    "machine_max_jerk_x": [
        "9",
        "9"
    ],
    "machine_max_jerk_y": [
        "9",
        "9"
    ],
    "machine_max_jerk_z": [
        "0.3",
        "0.4"
    ],
    "machine_max_speed_e": [
        "30",
        "25"
    ],
    "machine_max_speed_x": [
        "500",
        "200"
    ],
    "machine_max_speed_y": [
        "500",
        "200"
    ],
    "machine_max_speed_z": [
        "8",
        "12"
    ],
    "machine_min_extruding_rate": [
        "0",
        "0"
    ],
    "machine_min_travel_rate": [
        "0",
        "0"
    ],
    "machine_pause_gcode": "PAUSE",
    "machine_start_gcode": "M117 Heating\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nPRINT_START \nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\n\nM104 S0\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM117 Heating\nM190 S[bed_temperature_initial_layer_single]\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n;QUAD_GANTRY_LEVEL\nCLEAN_N S=[first_layer_temperature] X=240 Y=-3 A=0\nM117 Quad Level\n_QUAD_GANTRY_LEVEL  horizontal_move_z=10 retry_tolerance=1 LIFT_SPEED=5\nG28 Z\nM117 Quad Level\n_QUAD_GANTRY_LEVEL  horizontal_move_z=5 retry_tolerance=0.05 LIFT_SPEED=5\nHOME_Z X=132.5 Y=197.5\nM117 Bed Mesh Level\nBED_MESH_CALIBRATE\nM117 Heating\nG1 Y0.0 Z0.3 F1500 ; move print head up\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM117 .\nG92 E0.0\n; intro line\nG1 X175.0 E12 F1000\nG1 Y0.6\nG1 X5.0 E10 F1000\nG92 E0.0\n; intro line\nG1 Y1.0 Z0.2 F1000\nG1 X200.0 E15.0 F1000\nG92 E0.0",
    "machine_unload_filament_time": "0",
    "manual_filament_change": "0",
    "max_layer_height": [
        "0.32"
    ],
    "min_layer_height": [
        "0.08"
    ],
    "nozzle_diameter": [
        "0.4"
    ],
    "nozzle_hrc": "0",
    "nozzle_type": "hardened_steel",
    "nozzle_volume": "0",
    "parking_pos_retraction": "92",
    "print_host": "192.168.2.8",
    "print_host_webui": "",
    "printable_area": [
        "0x0",
        "400x0",
        "400x400",
        "0x400"
    ],
    "printable_height": "400",
    "printer_notes": "",
    "printer_settings_id": "Thinker X400 0.4 nozzle",
    "printer_structure": "undefine",
    "printer_technology": "FFF",
    "printer_variant": "0.4",
    "printhost_apikey": "",
    "printhost_authorization_type": "key",
    "printhost_cafile": "",
    "printhost_password": "",
    "printhost_port": "",
    "printhost_ssl_ignore_revoke": "0",
    "printhost_user": "",
    "purge_in_prime_tower": "1",
    "retract_before_wipe": [
        "0%"
    ],
    "retract_length_toolchange": [
        "2"
    ],
    "retract_lift_above": [
        "0"
    ],
    "retract_lift_below": [
        "0"
    ],
    "retract_lift_enforce": [
        "All Surfaces"
    ],
    "retract_restart_extra": [
        "0"
    ],
    "retract_restart_extra_toolchange": [
        "0"
    ],
    "retract_when_changing_layer": [
        "1"
    ],
    "retraction_length": [
        "0.8"
    ],
    "retraction_minimum_travel": [
        "1"
    ],
    "retraction_speed": [
        "30"
    ],
    "scan_first_layer": "0",
    "silent_mode": "0",
    "single_extruder_multi_material": "1",
    "support_air_filtration": "1",
    "support_chamber_temp_control": "1",
    "template_custom_gcode": "",
    "thumbnails": [
        "250x250"
    ],
    "thumbnails_format": "PNG",
    "time_cost": "0",
    "time_lapse_gcode": "",
    "upward_compatible_machine": [],
    "use_firmware_retraction": "0",
    "use_relative_e_distances": "1",
    "wipe": [
        "1"
    ],
    "wipe_distance": [
        "2"
    ],
    "z_hop": [
        "0.3"
    ],
    "z_hop_types": [
        "Auto Lift"
    ]
}