orcaslicer/resources/profiles/Anker/machine/fdm_machine_common.json

{
    "type": "machine",
    "name": "fdm_machine_common",
    "from": "system",
    "instantiation": "false",
    "support_chamber_temp_control": "0",
    "printer_technology": "FFF",
    "deretraction_speed": [
        "60"
    ],
    "extruder_colour": [
        "#018001"
    ],
    "extruder_offset": [
        "0x0"
    ],
    "silent_mode": "0",
    "machine_max_acceleration_e": [
        "4000"
    ],
    "machine_max_acceleration_extruding": [
        "6000"
    ],
    "machine_max_acceleration_retracting": [
        "1000"
    ],
    "machine_max_acceleration_x": [
        "6000"
    ],
    "machine_max_acceleration_y": [
        "6000"
    ],
    "machine_max_acceleration_z": [
        "300"
    ],
    "machine_max_acceleration_travel": [
        "6000"
    ],
    "machine_max_speed_e": [
        "50"
    ],
    "machine_max_speed_x": [
        "600"
    ],
    "machine_max_speed_y": [
        "600"
    ],
    "machine_max_speed_z": [
        "30"
    ],
    "machine_max_jerk_e": [
        "3"
    ],
    "machine_max_jerk_x": [
        "8"
    ],
    "machine_max_jerk_y": [
        "8"
    ],
    "machine_max_jerk_z": [
        "0.3"
    ],
    "machine_min_extruding_rate": [
        "0"
    ],
    "machine_min_travel_rate": [
        "0"
    ],
    "max_layer_height": [
        "0.32"
    ],
    "min_layer_height": [
        "0.05"
    ],
    "printer_settings_id": "",
    "retraction_minimum_travel": [
        "1"
    ],
    "retract_before_wipe": [
        "0%"
    ],
    "retract_when_changing_layer": [
        "1"
    ],
    "retraction_length": [
        "0.5"
    ],
    "retract_length_toolchange": [
        "2"
    ],
    "z_hop": [
        "0"
    ],
    "retract_restart_extra": [
        "0"
    ],
    "retract_restart_extra_toolchange": [
        "0"
    ],
    "retraction_speed": [
        "60"
    ],
    "single_extruder_multi_material": "1",
    "manual_filament_change": "1",
    "support_air_filtration": "0",
    "wipe": [
        "1"
    ]
}