orcaslicer/resources/profiles/Creality/machine/Creality CR-M4 0.4 nozzle.json

{
  "type": "machine",
  "setting_id": "GM001",
  "name": "Creality CR-M4 0.4 nozzle",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_creality_common",
  "printer_model": "Creality CR-M4",
  "gcode_flavor": "marlin",
  "printer_structure": "i3",
  "default_filament_profile": [
    "Creality Generic PLA"
  ],
  "default_print_profile": "0.20mm Standard @Creality CR-M4",
  "nozzle_diameter": [
    "0.4"
  ],
  "printable_height": "470",
  "printable_area": [
    "0x0",
    "450x0",
    "450x450",
    "0x450"
  ],
  "machine_max_speed_e": [
    "50",
    "50"
  ],
  "machine_max_acceleration_z": [
    "100",
    "100"
  ],
  "machine_max_acceleration_extruding": [
    "700",
    "700"
  ],
  "machine_max_jerk_x": [
    "10",
    "10"
  ],
  "machine_max_jerk_y": [
    "10",
    "10"
  ],
  "retraction_minimum_travel": [
    "0.8"
  ],
  "retraction_length": [
    "0.8"
  ],
  "retraction_speed": [
    "40"
  ],
  "nozzle_type": "undefine",
  "auxiliary_fan": "0",
  "machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
  "machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z"
}