orcaslicer/resources/profiles/Flashforge/filament/Flashforge Generic PETG.json

{
  "type": "filament",
  "filament_id": "GFG99",
  "setting_id": "GFSA04",
  "name": "Flashforge Generic PETG",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_filament_pet",
  "filament_flow_ratio": [
    "1"
  ],
  "filament_max_volumetric_speed": [
    "12"
  ],
  "slow_down_layer_time": [
    "8"
  ],
  "temperature_vitrification": [
    "70"
  ],
  "hot_plate_temp_initial_layer": [
    "70"
  ],
  "hot_plate_temp": [
    "70"
  ],
  "close_fan_the_first_x_layers": [
    "1"
  ],
  "slow_down_min_speed": [
    "30"
  ],
  "overhang_fan_speed": [
    "80"
  ],
  "support_material_interface_fan_speed": [
    "90"
  ],
  "additional_cooling_fan_speed": [
    "50"
  ],
  "filament_start_gcode": [
    "; filament start gcode \n;right_extruder_material:PETG"
  ],
  "filament_end_gcode": [
    "; filament end gcode\n"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "enable_pressure_advance": [
    "1"
  ],
  "pressure_advance": [
    "0.046"
  ],
  "filament_density": [
    "1.27"
  ],
  "nozzle_temperature_range_low": [
    "220"
  ],
  "nozzle_temperature_range_high": [
    "260"
  ],
  "nozzle_temperature_initial_layer": [
    "255"
  ],
  "nozzle_temperature": [
    "255"
  ],
  "fan_cooling_layer_time": [
    "30"
  ],
  "fan_max_speed": [
    "90"
  ],
  "fan_min_speed": [
    "40"
  ],
  "overhang_fan_threshold": [
    "25%"
  ],
  "compatible_printers": [
    "Flashforge Adventurer 5M 0.4 Nozzle",
    "Flashforge Adventurer 5M 0.6 Nozzle",
	"Flashforge Adventurer 5M 0.8 Nozzle",
    "Flashforge Adventurer 5M Pro 0.4 Nozzle",
    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
	"Flashforge Adventurer 5M Pro 0.8 Nozzle"
  ]
}