orcaslicer/resources/profiles/Peopoly/filament/Peopoly Lancer PET-CF.json

{
    "type": "filament",
    "filament_id": "GFL99",
    "setting_id": "GFSL99",
    "name": "Peopoly Lancer PET-CF",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_filament_abs",
    "filament_flow_ratio": [
        "0.90"
    ],
    "filament_density":["1.3"],
    "nozzle_temperature_initial_layer":[
        "280"
    ],
    "nozzle_temperature":[
        "300"
    ],
    "hot_plate_temp_initial_layer":["70"],
    "hot_plate_temp":["80"],
    "filament_max_volumetric_speed": [
        "35"
    ],
    "fan_max_speed":[
        "40"
    ],
    "slow_down_layer_time": [
        "8"
    ],
    "overhang_fan_speed":["30"],
    "reduce_fan_stop_start_freq":["0"],
    "filament_type": [
        "PET-CF"
    ],
    "enable_pressure_advance": [
        "1"
    ],
    "filament_retraction_length":["0.8"],
    "filament_retraction_speed":["60"],
    "filament_deretraction_speed":["60"],
    "filament_wipe":["1"],
    "filament_wipe_distance":["1"],
    "pressure_advance": [
        "0.005"
    ],
    "filament_vendor": [
        "Peopoly"
    ],
    "compatible_printers": [
        "Peopoly Magneto X 0.4 nozzle",
        "Peopoly Magneto X 0.6 nozzle",
        "Peopoly Magneto X 0.8 nozzle"
    ]
}