orcaslicer/resources/profiles/Snapmaker/filament/Snapmaker J1 PETG-CF @base.json

{
  "type": "filament",
  "from": "system",
  "instantiation": "false",
  "name": "Snapmaker J1 PETG-CF @base",
  "filament_id": "4235401834",
  "inherits": "fdm_filament_petg",
  "filament_end_gcode": [
    "M104 S{temperature_vitrification[current_extruder]} ;standby T{current_extruder}"
  ],
  "required_nozzle_HRC": [
    "40"
  ],
  "overhang_fan_threshold": [
    "10%"
  ],
  "overhang_fan_speed": [
    "55"
  ],
  "fan_cooling_layer_time": [
    "10"
  ],
  "filament_cost": [
    "40"
  ],
  "filament_density": [
    "1.25"
  ],
  "filament_max_volumetric_speed": [
    "6.4"
  ],
  "filament_retraction_minimum_travel": [
    "nil"
  ],
  "filament_retraction_length": [
    "nil"
  ],
  "nozzle_temperature_initial_layer": [
    "250"
  ],
  "temperature_vitrification": [
    "178"
  ],
  "fan_max_speed": [
    "30"
  ],
  "fan_min_speed": [
    "0"
  ],
  "slow_down_min_speed": [
    "10"
  ],
  "slow_down_layer_time": [
    "6"
  ],
  "enable_pressure_advance": [
    "0"
  ],
  "filament_type": [
    "PETG-CF"
  ],
  "default_filament_colour": [
    "#3D3C39"
  ],
  "nozzle_temperature_range_high": [
    "255"
  ]
}