orcaslicer/resources/profiles/BIQU/machine/BIQU BX (0.4 nozzle).json

{
  "type": "machine",
  "setting_id": "GM001",
  "name": "BIQU BX (0.4 nozzle)",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_biqu_common",
  "printer_model": "BIQU BX",
  "default_print_profile": "0.20mm Standard @BIQU BX (0.4 nozzle)",
  "nozzle_diameter": [
    "0.4"
  ],
  "printable_area": [
    "0x0",
    "250x0",
    "250x250",
    "0x250"
  ],
  "printable_height": "250",
  "nozzle_type": "undefine",
  "auxiliary_fan": "0",
  "deretraction_speed": [
    "70"
],
"gcode_flavor": "marlin",
"machine_max_acceleration_e": [
    "10000"
],
"machine_max_acceleration_extruding": [
    "1000"
],
"machine_max_acceleration_retracting": [
    "1000"
],
"machine_max_acceleration_x": [
    "1000"
],
"machine_max_acceleration_y": [
    "1000"
],
"machine_max_acceleration_z": [
    "100"
],
"machine_max_speed_e": [
    "60"
],
"machine_max_speed_x": [
    "500"
],
"machine_max_speed_y": [
    "500"
],
"machine_max_speed_z": [
    "10"
],
"machine_max_jerk_e": [
    "5"
],
"machine_max_jerk_x": [
    "10"
],
"machine_max_jerk_y": [
    "10"
],
"machine_max_jerk_z": [
    "0.3"
],
"max_layer_height": [
    "0.32"
],
"min_layer_height": [
    "0.10"
],
"printer_variant": "0.4",
"retraction_minimum_travel": [
    "1.5"
],
"retraction_length": [
    "1"
],
"retraction_speed": [
    "40"
],
"machine_start_gcode": "; BIQU BX Start G-code\n;M117 Initial homing sequence; Home so that the probe is positioned to heat\nG28\nM117 Probe heating position\nG0 X65 Y5 Z1; Move the probe to the heating position.\nM117 Getting the heaters up to temp!\nM104 S140; Set Extruder temperature, no wait\nM140 S60; Set Heat Bed temperature\nM190 S60; Wait for Heat Bed temperature\nM117 Waiting for probe to warm; Wait another 90s for the probe to absorb heat.\nG4 S90\nM117 Post warming re-home\nG28; Home all axes again after warming\nM117 Z-Dance of my people\nG34\nM117 ABL Probing\nG29\nM900 K0 L0 T0;Edit the K and L values if you have calibrated a k factor for your filament\nM900 T0 S0\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y10 Z0.3 F5000.0; Move to start position\nM117 Getting the extruder up to temp\nM140 S[first_layer_bed_temperature]; Set Heat Bed temperature\nM104 S[first_layer_temperature]; Set Extruder temperature\nM109 S[first_layer_temperature]; Wait for Extruder temperature\nM190 S[first_layer_bed_temperature]; Wait for Heat Bed temperature\nG92 E0; Reset Extruder\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30; Draw the second line\nG92 E0; Reset Extruder\nM117 Lets make\nG1 X8 Y20 Z0.3 F5000.0; Move over to prevent blob squish",
"machine_end_gcode": "; BIQU BX Default End Gcode\nG91;Relative positioning\nG1 E-2 F2700;Retract a bit\nG1 E-2 Z0.2 F2400;Retract a bit more and raise Z\nG1 X5 Y5 F3000;Wipe out\nG1 Z10;Raise Z by 10mm\nG90;Return to absolute positioning\nG1 X0 Y{print_bed_max[1]};TaDaaaa\nM106 S0;Turn-off fan\nM104 S0;Turn-off hotend\nM140 S0;Turn-off bed\nM84 X Y E;Disable all steppers but Z"
}