orcaslicer/resources/profiles/Dremel/machine/Dremel 3D45 0.4 nozzle.json

{
    "type": "machine",
    "setting_id": "GM001",
    "name": "Dremel 3D45 0.4 nozzle",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_dremel_common",
    "printer_model": "Dremel 3D45",
    "printer_variant": "0.4",
    "printer_settings_id": "Dremel",
    "gcode_flavor": "marlin",
    "default_filament_profile": [
      "Dremel Generic PLA @3D45 all"
    ],
    "default_print_profile": ".20mm Standard @Dremel 3D45 0.4",
    "nozzle_diameter": [
      "0.4"
    ],
    "printable_area": [
        "-127.5x-77.5",
        "97.5x-77.5",
        "97.5x77.5",
        "-127.5x77.5"
    ],
    "printable_height": "170",
    "deretraction_speed": [
        "40"
    ],
    "emit_machine_limits_to_gcode": "1",
    "enable_filament_ramming": "1",
    "extra_loading_move": "-2",
    "wipe": [
        "1"
    ],
    "wipe_distance": [
        "1"
    ],
    "z_hop": [
        "0.5"
    ],
    "machine_max_acceleration_e": [
        "10000",
        "10000"
    ],
    "machine_max_acceleration_extruding": [
        "1500",
        "1500"
    ],
    "machine_max_acceleration_retracting": [
        "1500",
        "1500"
    ],
    "machine_max_acceleration_x": [
        "9000",
        "9000"
    ],
    "machine_max_acceleration_y": [
        "9000",
        "9000"
    ],
    "machine_max_acceleration_z": [
        "500",
        "500"
    ],
    "machine_max_jerk_e": [
        "2.5",
        "2.5"
    ],
    "machine_max_jerk_x": [
        "10",
        "10"
    ],
    "machine_max_jerk_y": [
        "10",
        "10"
    ],
    "machine_max_jerk_z": [
        "0.2",
        "0.2"
    ],
    "machine_max_speed_e": [
        "120",
        "120"
    ],
    "machine_max_speed_x": [
        "500",
        "500"
    ],
    "machine_max_speed_y": [
        "500",
        "500"
    ],
    "machine_max_speed_z": [
        "12",
        "12"
    ],
    "max_layer_height": [
        "0.34"
    ],
    "min_layer_height": [
        "0.07"
    ],
    "retraction_length": [
        "1"
    ],
    "retraction_minimum_travel": [
        "2"
    ],
    "retraction_speed": [
        "40"
    ],
    "use_relative_e_distances": "0",
    "machine_start_gcode": "G28; home printer\nG1 Z50.00 F400; pruge line\nG1 F200 E3\nM132 X Y Z A; prepare printer\nM907 X100 Y100 Z50 A100",
    "machine_end_gcode": "M104 S0; turn off nozzle\nM140 S0; turn off bed\nG92 E1; return print head to home\nG1 E-1 F300\nG162 Z F600\nG162 X Y F2000\nM84; disable stepper motors",
    "machine_pause_gcode": "G5",
    "change_filament_gcode": "G5"
}