orcaslicer/resources/profiles/Anker/machine/Anker M5C 0.4 nozzle.json

{
    "type": "machine",
    "setting_id": "GM_Anker_001",
    "name": "Anker M5C 0.4 nozzle",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_machine_common",
    "printer_model": "Anker M5C",
    "default_print_profile": "0.20mm Standard @Anker",
    "default_filament_profile": [
        "Anker Generic PLA"
    ],
    "nozzle_diameter": [
        "0.4"
    ],
    "bed_exclude_area": [
        "0x0"
    ],
    "printable_area": [
        "0x0",
        "220x0",
        "220x220",
        "0x220"
    ],
    "printable_height": "250",
    "machine_start_gcode": "M4899 T3 ; Enable v3 jerk and S-curve acceleration \nM104 S{first_layer_temperature[0]-30} ; Anti-ooze - Set hotend temp to 30 degrees less than target\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; set final nozzle temp to stabilize\nG28 ;Home",
    "machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84",
    "layer_change_gcode": "",
    "scan_first_layer": "0",
    "nozzle_type": "hardened_steel",
    "auxiliary_fan": "0"
}