orcaslicer/resources/profiles/Flashforge/filament/Flashforge Generic TPU.json

{
  "type": "filament",
  "filament_id": "GFG99",
  "setting_id": "GFSA04",
  "name": "Flashforge Generic TPU",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_filament_tpu",
  "additional_cooling_fan_speed": [
    "100"
  ],
  "bed_temperature_difference": [
    "10"
  ],
  "chamber_temperature": "0",
  "close_fan_the_first_x_layers": [
    "1"
  ],
  "compatible_printers": [
    "Flashforge Adventurer 5M 0.4 Nozzle",
    "Flashforge Adventurer 5M 0.6 Nozzle",
	"Flashforge Adventurer 5M 0.8 Nozzle",
    "Flashforge Adventurer 5M Pro 0.4 Nozzle",
    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
	"Flashforge Adventurer 5M Pro 0.8 Nozzle"
  ],
  "compatible_printers_condition": "",
  "compatible_prints": [],
  "compatible_prints_condition": "",
  "cool_plate_temp": [
    "60"
  ],
  "cool_plate_temp_initial_layer": [
    "60"
  ],
  "default_filament_colour": [
    ""
  ],
  "enable_overhang_bridge_fan": [
    "1"
  ],
  "enable_pressure_advance": [
    "1"
  ],
  "eng_plate_temp": [
    "60"
  ],
  "eng_plate_temp_initial_layer": [
    "60"
  ],
  "fan_cooling_layer_time": [
    "100"
  ],
  "fan_max_speed": [
    "100"
  ],
  "fan_min_speed": [
    "100"
  ],
  "filament_cost": [
    "20"
  ],
  "filament_density": [
    "1.24"
  ],
  "filament_deretraction_speed": [
    "nil"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "filament_end_gcode": [
    "; filament end gcode \n"
  ],
  "filament_flow_ratio": [
    "1"
  ],
  "filament_is_support": [
    "0"
  ],
  "filament_max_volumetric_speed": [
    "3.5"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "15"
  ],
  "filament_retract_before_wipe": [
    "nil"
  ],
  "filament_retract_restart_extra": [
    "nil"
  ],
  "filament_retract_when_changing_layer": [
    "nil"
  ],
  "filament_retraction_length": [
    "1.2"
  ],
  "filament_retraction_minimum_travel": [
    "nil"
  ],
  "filament_retraction_speed": [
    "nil"
  ],
  "filament_settings_id": [
    "Flashforge TPU"
  ],
  "filament_shrink": [
    "100%"
  ],
  "filament_soluble": [
    "0"
  ],
  "filament_start_gcode": [
    "; filament start gcode\n;right_extruder_material:TPU\n"
  ],
  "filament_type": [
    "TPU"
  ],
  "filament_vendor": [
    "Generic"
  ],
  "filament_wipe": [
    "nil"
  ],
  "filament_wipe_distance": [
    "nil"
  ],
  "filament_z_hop": [
    "nil"
  ],
  "filament_z_hop_types": [
    "nil"
  ],
  "full_fan_speed_layer": [
    "0"
  ],
  "hot_plate_temp": [
    "45"
  ],
  "hot_plate_temp_initial_layer": [
    "45"
  ],
  "nozzle_temperature": [
    "235"
  ],
  "nozzle_temperature_initial_layer": [
    "235"
  ],
  "nozzle_temperature_range_high": [
    "250"
  ],
  "nozzle_temperature_range_low": [
    "190"
  ],
  "overhang_fan_speed": [
    "100"
  ],
  "overhang_fan_threshold": [
    "50%"
  ],
  "pressure_advance": [
    "0.035"
  ],
  "reduce_fan_stop_start_freq": [
    "1"
  ],
  "required_nozzle_HRC": [
    "0"
  ],
  "slow_down_for_layer_cooling": [
    "1"
  ],
  "slow_down_layer_time": [
    "8"
  ],
  "slow_down_min_speed": [
    "20"
  ],
  "support_material_interface_fan_speed": [
    "100"
  ],
  "temperature_vitrification": [
    "60"
  ],
  "textured_plate_temp": [
    "60"
  ],
  "textured_plate_temp_initial_layer": [
    "60"
  ],
  "version": "1.5.1.2"
}