orcaslicer/resources/profiles/Prusa/machine/Prusa XL 0.4 nozzle.json

{
  "type": "machine",
  "setting_id": "GM003",
  "name": "Prusa XL 0.4 nozzle",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_machine_common",
  "gcode_flavor": "marlin2",
  "printer_model": "Prusa XL",
  "default_filament_profile": "Prusa Generic PLA @XL",
  "default_print_profile": "0.20mm Speed @Prusa XL 0.4",
  "extruder_clearance_radius": "67",
  "extruder_clearance_height_to_rod": "21",
  "extruder_clearance_height_to_lid": "21",
  "printer_variant": "0.4",
  "nozzle_diameter": [
    "0.4"
  ],
  "max_layer_height": "0.3",
  "min_layer_height": "0.07",
  "bed_exclude_area": [
    "0x0"
  ],
  "printable_area": [
    "0x0",
    "360x0",
    "360x360",
    "0x360"
  ],
  "machine_max_acceleration_e": [
    "2500",
    "2500"
  ],
  "machine_max_acceleration_extruding": [
    "4000",
    "4000"
  ],
  "machine_max_acceleration_retracting": [
    "1200",
    "1200"
  ],
  "machine_max_acceleration_x": [
    "7000",
    "7000"
  ],
  "machine_max_acceleration_y": [
    "7000",
    "7000"
  ],
  "machine_max_acceleration_z": [
    "200",
    "200"
  ],
  "machine_max_acceleration_travel": [
    "5000",
    "5000"
  ],
  "machine_max_speed_e": [
		"100",
		"100"
	],
	"machine_max_speed_x": [
		"400",
		"400"
	],
	"machine_max_speed_y": [
		"400",
		"400"
	],
	"machine_max_speed_z": [
		"12",
		"12"
	],
	"machine_max_jerk_e": [
		"10",
		"10"
	],
	"machine_max_jerk_x": [
		"8",
		"8"
	],
	"machine_max_jerk_y": [
		"8",
		"8"
	],
	"machine_max_jerk_z": [
		"2",
		"2"
	],
  "retraction_length": "0.8",
  "retraction_speed": "35",
  "detraction_speed": "25",
  "retraction_minimum_travel": "1.5",
  "retract_when_changing_layer": "1",
  "wipe": "1",
  "retract_before_wipe": "80%",
  "retract_lift_below": "1.5",
  "z_hop_types": "Auto Lift",
  "host_type": "prusalink",
  "printable_height": "360",
  "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720{endif} ; Move bed down\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X6 Y350 F6000 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+100, max_print_height)} F300{endif} ; Move bed down\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM221 S100 ; reset flow percentage\nM84 ; disable motors\n; max_layer_z = [max_layer_z]",
  "machine_pause_gcode": "M601",
  "machine_start_gcode": "M17 ; enable steppers\nM862.3 P \"XL\" ; printer model check\nM115 U6.0.1+14848\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; set print area\nM555 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])}\n; inform about nozzle diameter\nM862.1 P[nozzle_diameter]\n; set & wait for bed and extruder temp for MBL\nM140 S[first_layer_bed_temperature] ; set bed temp\nM104 T0 S{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; set extruder temp for bed leveling\nM109 T0 R{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; wait for temp\n; home carriage, pick tool, home all\nG28 XY\nM84 E ; turn off E motor\nG28 Z\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG29 G ; absorb heat\n; move to the nozzle cleanup area\nG1 X{(min(((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))), first_layer_print_min[0])) + 32} Y{(min((first_layer_print_min[1] - 7), first_layer_print_min[1]))} Z{5} F4800\nM302 S160 ; lower cold extrusion limit to 160C\nG1 E{-(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; retraction for nozzle cleanup\n; nozzle cleanup\nM84 E ; turn off E motor\nG29 P9 X{((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)))} Y{(first_layer_print_min[1] - 7)} W{32} H{7}\nG0 Z10 F480 ; move away in Z\n{if first_layer_bed_temperature[0] > 60}\nG0 Z70 F480 ; move away (a bit more) in Z\nG0 X30 Y{print_bed_min[1]} F6000 ; move away in X/Y for higher bed temperatures\n{endif}\nM106 S100 ; cool off the nozzle\nM107 ; stop cooling off the nozzle - turn off the fan\n; MBL\nM84 E ; turn off E motor\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X30 Y0 W50 H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\nM104 S[first_layer_temperature] ; set extruder temp\nG1 Z10 F720 ; move away in Z\nG0 X30 Y-8 F6000 ; move next to the sheet\n; wait for extruder temp\nM109 T0 S{first_layer_temperature[0]}\n;\n; purge\n;\nG92 E0 ; reset extruder position\nG0 X{(0 == 0 ? 30 : (0 == 1 ? 150 : (0 == 2 ? 210 : 330)))} Y{(0 < 4 ? -8 : -5.5)} ; move close to the sheet's edge\nG1 E{(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E10 X40 Z0.2 F500 ; purge\nG0 X70 E9 F800 ; purge\nG0 X{70 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{70 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG92 E0 ; reset extruder position",
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]",
  "change_filament_gcode": "M600\nG1 E0.3 F1500 ; prime after color change",
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
  "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_XLIS\nPG\nINPUT_SHAPER",
  "scan_first_layer": "0",
  "nozzle_type": "hardened_steel",
  "auxiliary_fan": "0",
  "thumbnails": [
    "16x16/QOI",
    "313x173/QOI",
    "440x240/QOI",
    "480x240/QOI",
    "640x480/PNG"
  ]
}