From e83e052bb5e45b8dfcef40b4d916585ae5dab4e1 Mon Sep 17 00:00:00 2001 From: SouthAsh1 <46602573+SouthAsh1@users.noreply.github.com> Date: Fri, 29 Mar 2024 16:51:06 -0700 Subject: [PATCH] Fixed images --- Doc/README.md | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/Doc/README.md b/Doc/README.md index 94d1d3c..b2ac1ae 100644 --- a/Doc/README.md +++ b/Doc/README.md @@ -5,24 +5,24 @@ This project assumes you know how to build the standard XOL 2 toolhead with this | Notes | Image | | -------------------- | -------------------- | -|Remove the support material in orange. They should break away with ease.| | -|Next drill out the 2 `Flanged M2` Heatset Inserts with a `5/64 inch drill bit`. Then use the `#2 center drill bit` to chamfer the top of one and the bottom of the other. ⚠⚠ **Make sure you thuroghly clean the inserts of brass when done!** ⚠⚠|| -|Insert the `Flanged M2` heatset with the **top chamfer** into the `extruder_adapter_bottom.stl` with the flang surface flush with the printed surface.|| -|Insert the `Flanged M2` heatset with the **bottom chamfer** into the `extruder_adapter_top_(your_choice_here).stl` with the flang surface flush with the printed surface.|| -|Next insert the 3 `M2x3.5x4 Heatsets` into the 3 holes in the `extruder_adapter_top_(your_choice_here).stl`.|| -|Screw the `extruder_adapter_top_(your_choice_here).stl` and `extruder_adapter_bottom.stl` together with `M2x8 SHCS` ⚠Do not over tighten!⚠ || -|Clean the inside of the filament path with a `5/64 inch drill bit` it may have some ooze from istalling the Heatset inserts.|| -|Place the `5.5mm Ball Bearing` in the hole on top of the extruder adapter.|| -|Put the `Omron D2F` (with no lever) into slot with clicker behind the Ball Bearing, secure with `M2x10 Self Tapping Screws`.|| -|Insert one `M2.5x3.5x4 Heatset` into the hotend mount (rest of hotend heatsets are not explained refer to Xol 2 Docs).|| -|Install extruder adapter onto the `HE Mount` of your choice and install on your carriage of choice. (Tap option shown in picture)|| -|Select the Blades of your choice `#4` (Yellow) or `OLFA KB4-F/5` (Green).|| -|Use the Blade Jig that coresponds with your blade of choice #4 / OLFA and clamp the blade in it with the blade sticking in. **Final length should be ~20mm.**|| -|Use the `blade_install_tool.stl` to install the blade. ⚠⚠ **Take extra precaution as the blades do not care and will go through your skin with no remorse and then the red sauce comes out!** ⚠⚠|| -|Insure that the blade is squared up with the `[b]_blade_holder_(your_choice_here).stl`. The hole on top is big enough for an `M3 Grub Screw` or you can glue the blade in.|| -|Slide the Blade Holder into the Extruder adapter carefully aligning the blade into the slot.|| -|Install the Spring into the slot on the `[a]_cutter_arm.stl`.|| -|Slide the cutter arm into the slot on the Hotend Frame partially **Do not kink the spring**.|| -|Use a small slim screwdriver of sorts to persuade the spring into the recess in the extruder mount while sliding the arm into its final position.|| -|Install the 2 `M2.5x15 SHCS` into the frame and blade holder to finish up the cutter install.|| -|After all this the rest of the XOL 2 will go together the same as the standard one.|| +|Remove the support material in orange. They should break away with ease.| | +|Next drill out the 2 `Flanged M2` Heatset Inserts with a `5/64 inch drill bit`. Then use the `#2 center drill bit` to chamfer the top of one and the bottom of the other. ⚠⚠ **Make sure you thuroghly clean the inserts of brass when done!** ⚠⚠|| +|Insert the `Flanged M2` heatset with the **top chamfer** into the `extruder_adapter_bottom.stl` with the flang surface flush with the printed surface.|| +|Insert the `Flanged M2` heatset with the **bottom chamfer** into the `extruder_adapter_top_(your_choice_here).stl` with the flang surface flush with the printed surface.|| +|Next insert the 3 `M2x3.5x4 Heatsets` into the 3 holes in the `extruder_adapter_top_(your_choice_here).stl`.|| +|Screw the `extruder_adapter_top_(your_choice_here).stl` and `extruder_adapter_bottom.stl` together with `M2x8 SHCS` ⚠Do not over tighten!⚠ || +|Clean the inside of the filament path with a `5/64 inch drill bit` it may have some ooze from istalling the Heatset inserts.|| +|Place the `5.5mm Ball Bearing` in the hole on top of the extruder adapter.|| +|Put the `Omron D2F` (with no lever) into slot with clicker behind the Ball Bearing, secure with `M2x10 Self Tapping Screws`.|| +|Insert one `M2.5x3.5x4 Heatset` into the hotend mount (rest of hotend heatsets are not explained refer to Xol 2 Docs).|| +|Install extruder adapter onto the `HE Mount` of your choice and install on your carriage of choice. (Tap option shown in picture)|| +|Select the Blades of your choice `#4` (Yellow) or `OLFA KB4-F/5` (Green).|| +|Use the Blade Jig that coresponds with your blade of choice #4 / OLFA and clamp the blade in it with the blade sticking in. **Final length should be ~20mm.**|| +|Use the `blade_install_tool.stl` to install the blade. ⚠⚠ **Take extra precaution as the blades do not care and will go through your skin with no remorse and then the red sauce comes out!** ⚠⚠|| +|Insure that the blade is squared up with the `[b]_blade_holder_(your_choice_here).stl`. The hole on top is big enough for an `M3 Grub Screw` or you can glue the blade in.|| +|Slide the Blade Holder into the Extruder adapter carefully aligning the blade into the slot.|| +|Install the Spring into the slot on the `[a]_cutter_arm.stl`.|| +|Slide the cutter arm into the slot on the Hotend Frame partially **Do not kink the spring**.|| +|Use a small slim screwdriver of sorts to persuade the spring into the recess in the extruder mount while sliding the arm into its final position.|| +|Install the 2 `M2.5x15 SHCS` into the frame and blade holder to finish up the cutter install.|| +|After all this the rest of the XOL 2 will go together the same as the standard one.||