diff --git a/Doc/README.md b/Doc/README.md
index b2ac1ae..74c7a67 100644
--- a/Doc/README.md
+++ b/Doc/README.md
@@ -25,4 +25,5 @@ This project assumes you know how to build the standard XOL 2 toolhead with this
 |Slide the cutter arm into the slot on the Hotend Frame partially **Do not kink the spring**.|<img src='images/cutter_arm_partial_install.png' width=300 />|
 |Use a small slim screwdriver of sorts to persuade the spring into the recess in the extruder mount while sliding the arm into its final position.|<img src='images/spring_arm_full _install.png' width=300 />|
 |Install the 2 `M2.5x15 SHCS` into the frame and blade holder to finish up the cutter install.|<img src='images/arm_screw_install.png' width=300 />|
+|If using XolPAP Install the `M2.5x15 SHCS` on the back side of the arm shown here. (Thanks to scheini79 for the suggestion!)|<img src='images/xolpap_screw_install.png' width=300 />|
 |After all this the rest of the XOL 2 will go together the same as the standard one.|<img src='images/final_build.png' width=300 />|